Remote non-contact monitoring of human vital signs has recently received lots of attention due to the advancement and availability of millimeter wave (mmWave) radars. These sensors are significantly reduced in size, but still face serious electromagnetic (EM) propagation loss and signal obstructions resulting in lower signal-to-noise ratios (SNR). As mmWave received signals also have higher sensitivity to body motions, these effects typically degrade the accuracy of heart rate (HR) detection. To overcome this challenge, MIMO configuration can be used to improve the SNR level by taking advantage of its channel diversity. We use here a Frequency Modulated Continuous Wave (FMCW) radar from Texas Instruments (TI) at 77 GHz to collect data from 192 channels. Additionally, vital sign information is extracted using Arctangent Demodulation (AD) and Maximal Ratio Combining (MRC) combined with an adapted-wavelet Continuous Wavelet Transform (CWT) are utilized to demonstrate improvement of HR estimation accuracy.
25 January 2022 in IEEE Journal of Electromagnetics, RF and Microwaves in Medicine and Biology
Remote vital signs monitoring using millimeter-wave (mmWave) sensors has gained lots of attention because of their contactless, portable advantages. However, their received signals are more sensitive to random body motions (RBM) which degrades the accuracy of heart rate (HR) detection. To overcome this challenge, multi-input multi-output (MIMO) configuration can be used to reduce RBM's impact as each channel has different points of view with respect to the subject under test (SUT). Here we propose the use of a Frequency Modulated Continuous Wave (FMCW) radar from Texas Instruments (TI) at 77 GHz to collect data from its 192-channel configuration. Since vital sign information extracted using Arctangent Demodulation (AD) could be corrupted by either RBM or respiratory harmonics, a method is needed to minimize such effects. Hence, we develop an algorithm where a Heartbeat Template (HBT) is extruded based on the Constellation Diagram that shows the Quadrature signals from the target's range profile. The HBT is then used to design an adapted-wavelet for Continuous Wavelet Transform (CWT) to magnify the heartbeat signals. Under circumstances where RBM overwhelms the heartbeat signal that the HBT cannot completely reduce its effects, a spectral-based HR selection method is also developed to estimate the HR. By employing the proposed methods, we have reduced mean-error ${\mu _e}$ of HR estimation significantly from 9 bpm to less than 2 bpm.
8 June 2018 in IEEE Transactions on Antennas and Propagation
This paper presents a 3600 scanning circular microwave lens based on the Bootlace lens design concepts. However, instead of allocating the beam ports and receiving ports on two opposite sides of the lens, the polygon lens alternates the beam and receiving ports in an interleaving order on all sides and allows the use of circular symmetry to cover 360° scanning. In this paper, a new analytical approach is proposed which minimizes the phase errors for the “perfect” focal points of the lens to design the polygon lens. In order to evaluate the proposed method, an octagonal lens was designed and fabricated. Each facet of the lens feeds a four-element rectangular patch array. The results show a full 3600 coverage in the band of interest. Comparisons between measurements and simulations show a good agreement.
21 March 2018 in IET Microwaves, Antennas & Propagation
Millimetre wave technology is now considered as a key component for the next generation (5G) of cellular networks since they offer higher data rates and broader bandwidth compared to the current technology. However, since communication in this frequency band suffers higher propagation loss and atmospheric absorption (∼12 dB/km), the use of highly directional antennas plays an important role in order to compensate for these losses. Therefore, it is necessary to design beamforming networks that are not only able to support these antennas but also offer practical and compact solutions to be placed in any modern transceiver system. Rotman lenses have long been used as analogue beamforming networks to support linear array antennas for electronic scanning. Their broad bandwidth and planar structure make them ideal for these types of applications. However, their overall dimensions can be prohibitively large, especially for systems requiring large scan angles. In this study, the authors propose a new compact configuration that reduces the overall dimensions of the conventional Rotman lens by as much as 50% without degrading its performance.
This paper presents a Rotman lens-fed array antenna operating at 60 GHz. The lens-fed array antenna is a combination of a microstrip Rotman lens and an aperture coupled patch array antenna for millimeter wave applications. The phase and amplitude distributions of the lens are simulated to verify the design parameters. The beam directions radiated from the aperture coupled array antenna are +30°, − 30°, and 0° in a frequency range from 58 GHz to 61 GHz (V-band).
Millimeter Wave (mmWave) communication is considered as an enabling technology for the next generation of cellular networks because it offers much larger bandwidth and higher data rate than the current lower-frequency cellular systems to satisfy the exponential growth of mobile data demand. High gain directional antennas are needed to overcome high propagation losses in mmWave bands. However, the reliance on highly directional antennas will result in a more complicated initial cell search procedure since both base station and mobile device have to look for each other over a large space to establish the link. This paper focuses on analyzing the performance of the directional cell search procedure where the base stations periodically transmit signals in a set of optimal directional patterns to scan the coverage area. The mobile terminals detect the signals from the base station using the Generalized Likelihood Ratio Test (GLRT). The results show that with an appropriate scanning scheme, the use of directional antennas can outperform their omnidirectional counterparts in terms of signal detection performance as well as total time required.