Tuan Nguyen

Dr. Tuan Nguyen

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 June 2018 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
TNTuan Nguyen
Tuan Nguyen
TDToan Vo Dai
Toan Vo Dai
OKOzlem Kilic
Ozlem Kilic
This paper presents a 3600 scanning circular microwave lens based on the Bootlace lens design concepts. However, instead of allocating the beam ports and receiving ports on two opposite sides of the lens, the polygon lens alternates the beam and receiving ports in an interleaving order on all sides and allows the use of circular symmetry to cover 360° scanning. In this paper, a new analytical approach is proposed which minimizes the phase errors for the “perfect” focal points of the lens to design the polygon lens. In order to evaluate the proposed method, an octagonal lens was designed and fabricated. Each facet of the lens feeds a four-element rectangular patch array. The results show a full 3600 coverage in the band of interest. Comparisons between measurements and simulations show a good agreement.

18 April 2025 in Machines
Verified
Journal Article
Open access
PDF file
TNTri T. Nguyen
Tri T. Nguyen
CNCharles C. Nguyen
Charles C. Nguyen
TNTuan Nguyen
Tuan Nguyen
Tu DuongTu Duong
Tu Duong
HNHa Tang T Ngo
Ha Tang T Ngo
LSLu Sun
Lu Sun
This paper presents a new decentralized adaptive control scheme for motion control of robot manipulators built based on a closed-kinematic chain mechanism (CKCM). By employing the synchronization technique and model reference adaptive control (MRAC) based on the Lyapunov direct method, the Decentralized Adaptive Synchronized Control scheme (DASCS) is developed. The DASCS can ensure global asymptotic convergence of tracking errors while forcing all active joints to move in a predefined synchronous manner in the presence of uncertainties and sudden changes in payload. Furthermore, the control scheme has a simple structure, independent of the manipulator’s dynamic model, ensuring computational efficiency. Results of computer simulations conducted to evaluate the performance of the control scheme applied to controlling the motion of a CKCM manipulator with six degrees of freedom are reported and discussed.

17 March 2025 in Preprints.org
Verified
Preprint
Open access
PDF file
TNTri Nguyen
Tri Nguyen
CNCharles C. Nguyen
Charles C. Nguyen
TNTuan Nguyen
Tuan Nguyen
Tu DuongTu Duong
Tu Duong
HNHa Tang T Ngo
Ha Tang T Ngo
LSLu Sun
Lu Sun
This paper presents a new decentralized adaptive control scheme for motion control of robot manipulators built based closed-kinematic chain mechanism (CKCM). By employing the synchronization technique and model reference adaptive control (MRAC) based on the Lyapunov direct method, the Decentralized Adaptive Synchronized Control (DASC) scheme is developed. The DASC scheme can ensure global asymptotic convergence of tracking errors while forcing all active joints to move in a predefined synchronous manner in the presence of uncertainties and sudden changes in payload. In addition, the control scheme has a simple structure that does not depend on the knowledge of the dynamic mathematical model of a robot manipulator resulting in computational efficiency of control scheme implementation. Results of computer simulation conducted to evaluate the performance of the control scheme applied to control the motion of a CKCM manipulator with 6 degrees of freedom are reported and discussed.

25 July 2025 in Machines
Verified
Journal Article
Open access
PDF file
CNCharles C. Nguyen
Charles C. Nguyen
TNTri T. Nguyen
Tri T. Nguyen
Tu DuongTu Duong
Tu Duong
TNTuan Nguyen
Tuan Nguyen
HNHa Tang T Ngo
Ha Tang T Ngo
LSLu Sun
Lu Sun
This paper presents the results of real-time experiments conducted to evaluate the performance of a developed adaptive control scheme applied to control the motion of a real closed-kinematic chain mechanism (CKCM) robot manipulator with two degrees of freedom (DOFs). The developed control scheme, referred to as the decentralized adaptive synchronized control scheme (DASCS), was the result of the combination of model reference adaptive control (MRAC) based on the Lyapunov direct method and the synchronization technique. CKCM manipulators were considered in the experimental study due to their advantages over their open-kinematic chain mechanism (OKCM) manipulator counterparts, such as higher stiffness, better stability, and greater payload. The conducted computer simulation study showed that the DASCS was able to asymptotically converge tracking errors to zero, with all the active joints moving synchronously in a prescribed way. One of the important properties of the DASCS is the independence of robot manipulator dynamics, making it computationally efficient and therefore suitable for real-time applications. The present paper reports findings from experiments in which the DASCS was applied to control the above manipulator and carry out various paths. The DASCS’s performance was compared with that of a traditional adaptive control scheme, namely the SMRACS, when both schemes were applied to track the same paths.

31 March 2026 in Preprints.org
Verified
Preprint
Open access
PDF file
CNCharles C. Nguyen
Charles C. Nguyen
HNHa Tang T Ngo
Ha Tang T Ngo
Tu DuongTu Duong
Tu Duong
TNTri T. Nguyen
Tri T. Nguyen
TNTuan Nguyen
Tuan Nguyen
LSLu Sun
Lu Sun
This study presents a structured analysis of 343 publications on artificial intelligence-based methods for robot manipulator control published between 2015 and 2025. The review examines how AI has been incorporated into the control pipeline by organizing prior work according to functional roles, including perception and estimation, planning, learning based control, interaction and safety, and learning and adaptation. In addition to this functional taxonomy, the study analyzes publication growth, application do-mains, robot types, evaluation settings, and methodological patterns to characterize the evolution of the field over the past decade. The results show that research activity has been concentrated primarily in learning control, while other functional roles have received comparatively less attention. The literature also reveals an uneven distribution across ap-plication areas and robot platforms, with a strong reliance on simulation and limited evidence of integrated real-world deployment. These patterns indicate that, despite rapid growth and methodological diversity, the field remains imbalanced in both research focus and validation maturity. Rather than summarizing individual studies in isolation, this review provides a high-level perspective on where effort has been concentrated, where major gaps persist, and which directions are most critical for advancing AI-based robot manipulator control toward reliable and scalable real-world use.

13 April 2026 in Actuators
Verified
Journal Article
Open access
PDF file
CNCharles C. Nguyen
Charles C. Nguyen
TNTuan Nguyen
Tuan Nguyen
HNHa Tang T Ngo
Ha Tang T Ngo
TNTri T. Nguyen
Tri T. Nguyen
Tu DuongTu Duong
Tu Duong
This paper presents a novel hybrid learning-based control scheme for position control of robot manipulators whose structure is based on a closed-kinematic-chain mechanism (CKCM). The developed control scheme integrates two complementary control components: the feedback controller and the learning controller. The feedback controller is designed using linearization about a desired trajectory and a PID control law whose gains are selected by a tuning algorithm to guarantee semi-global stability of the linearized closed-loop feedback system. The learning controller incorporates PID-type iterative learning strategy to generate additional control inputs to compensate for modeling uncertainties and unmodeled dynamics. By updating the control input iteratively from trial to trial, the learning controller progressively improves the overall control performance. The effectiveness of the developed control scheme is demonstrated through computer simulations conducted on a six-degree-of-freedom CKCM robot manipulator. Simulation results are presented and discussed to evaluate the tracking accuracy of the developed approach.