Within the scope of concrete internal defect detection via laser Doppler vibrometry (LDV), the acquired signals frequently suffer from low signal-to-noise ratios (SNR) due to the heterogeneity of the concrete’s material properties and its rough surface structure. Consequently, these factors make the defect signal characteristics challenging to discern precisely. In response to this challenge, we propose an internal defect detection algorithm that incorporates local mean decomposition-singular value decomposition (LMD-SVD) and weighted spatial-spectral entropy (WSSE). Initially, the LDV vibration signal undergoes denoising via LMD and the SVD algorithms to reduce noise interference. Subsequently, the distribution of each frequency in the scan plane is analyzed utilizing the WSSE algorithm. Since the vibrational energy of the frequencies caused by the defect resonance is concentrated in the defect region, its energy distribution in the scan plane is non-uniform, resulting in a significant difference between the defect resonance frequencies’ SSE values and the other frequencies’ SSE values. This feature is used to estimate the resonant frequencies of internal defects. Ultimately, the defects are characterized based on the modal vibration patterns of the defect resonant frequencies. Tests were performed on two concrete blocks with simulated cavity defects, using an ultrasonic transducer as the excitation device to generate ultrasonic vibrations directly from the back of the blocks and applying an LDV as the acquisition device to collect vibration signals from their front sides. The results demonstrate the algorithm’s capacity to effectively pinpoint the information on the location and shape of shallow defects within the concrete, underscoring its practical significance for concrete internal defect detection in practical engineering scenarios.
In order to realize the automatic classification of internal defects for non-contact nondestructive testing of concrete, a concrete multi-type defect classification algorithm based on the mixed strategy slime mold algorithm support vector machine (MSSMA-SVM) was proposed. The concrete surface’s vibration signal was obtained using a laser Doppler vibrometer (LDV) for four classification targets for no defect, segregation, cavity, and foreign matter concrete classification targets. The wavelet packet transform (WPT) decomposes the detected signals to get information on different frequency bands. The energy ratio change rate, energy ratio, and wavelet packet singular entropy of each node after the WPT were used as the feature input of MSSMA-SVM. The experimental results show that the designed MSSMA-SVM classifier can accurately detect the type, which provides a practical algorithm for classifying concrete defects by laser vibration measurement.
Imaging through a wavy water–air interface is challenging since light rays are bent by unknown amounts, leading to complex geometric distortions. Considering the restoration of instantaneous distorted images, this paper proposes an image recovery model via structured light projection. The algorithm is composed of two separate parts. In the first part, an algorithm for the determination of the instantaneous shape of the water surface via structured light projection is developed. Then, we synchronously recover the distorted airborne scene image through reverse ray tracing in the second part. The experimental results show that, compared with the state-of-the-art methods, the proposed method not only can overcome the influence of changes in natural illumination conditions for WAI reconstruction, but also can significantly reduce the distortion and achieve better performance.
Compared with point-to-point wireless optical communication systems, multi-faceted Optical Base Stations (OBSs) offer the advantages of supporting multi-user access and achieving omnidirectional dynamic communication. The emission structure of the multi-faceted OBSs, which offer wide beam coverage and ensure uniform distribution of optical signals, is essential for users to receive signals while in motion. This paper presents a modeling method for three-dimensional beam coverage based on the multi-faceted OBS architecture. Additionally, a Multi-Objective Particle Swarm Optimization (MOPSO) algorithm is used to optimize the configuration of the multi-faceted LED array by adjusting the deflection angles of the LED arrays and the emission half-angle of the LEDs at the OBS. These advancements aim to enhance beam coverage performance while also providing technical support for achieving omnidirectional communication in underwater optical wireless networks (UOWN).
Imaging through water waves will cause complex geometric distortions and motion blur, which seriously affect the correct identification of an airborne scene. The current methods main rely on high-resolution video streams or a template image, which limits their applicability in real-time observation scenarios. In this paper, a novel recovery method for the instantaneous images distorted by surface waves is proposed. The method first actively projects an adaptive and adjustable structured light pattern onto the water surface for which random fluctuation will cause the image to degrade. Then, the displacement field of the feature points in the structured light image is used to estimate the motion vector field of the corresponding sampling points in the scene image. Finally, from the perspective of fluid mechanics, the distortion-free scene image is reconstructed based on the Helmholtz-Hodge Decomposition (HHD) theory. Experimental results show that our method not only effectively reduces the distortion to the image, but also significantly outperforms state-of-the-art methods in terms of computational efficiency. Moreover, we tested the real-scene sequences of a certain length to verify the stability of the algorithm.
Compared with point-to-point underwater wireless optical communication (UWOC) systems with a single direction, the underwater multi-faceted optical base station (OBS) offers independent fields of view and directions for each receiving detector, supporting multiple user access and mobile communication. This study aims at the issue of link interruptions and a limited communication area caused by restricted OBS receiver fields of view when underwater devices move. A field-of-view model and spatial angle diversity reception framework for the multi-faceted OBS in underwater channels have been developed, visualizing the effective reception field of the OBS. This model helps analyze the impact of multi-faceted OBS detector layouts on link performance in underwater environments. Furthermore, under constraints on the number of detectors, configuration adjustments are made to the field-of-view angles and deflection angles of detectors. Simulation results show that, under the same typical underwater environmental conditions, the optimized configuration reduces the blind area compared to the typical configuration, enhancing the effective spatial field of view of the OBS receiver by over 10%. The OBS’s effective communication coverage for mobile devices on different planes is also improved. This research provides a theoretical model and parameter configuration guidelines for the design of the underwater multi-faceted OBS.