Imaging through the wavy water–air interface is challenging since the random fluctuations of water will cause complex geometric distortion and motion blur in the images, seriously affecting the effective identification of the monitored object. Considering the problems of image recovery accuracy and computational efficiency, an efficient reconstruction scheme that combines lucky-patch search and image registration technologies was proposed in this paper. Firstly, a high-quality reference frame is rebuilt using a lucky-patch search strategy. Then an iterative registration algorithm is employed to remove severe geometric distortions by registering warped frames to the reference frame. During the registration process, we integrate JADE and LBFGS algorithms as an optimization strategy to expedite the control parameter optimization process. Finally, the registered frames are refined using PCA and the lucky-patch search algorithm to remove residual distortions and random noise. Experimental results demonstrate that the proposed method significantly outperforms the state-of-the-art methods in terms of sharpness and contrast.
12 November 2017 in International Journal of Pattern Recognition and Artificial Intelligence
Within the scope of concrete internal defect detection via laser Doppler vibrometry (LDV), the acquired signals frequently suffer from low signal-to-noise ratios (SNR) due to the heterogeneity of the concrete’s material properties and its rough surface structure. Consequently, these factors make the defect signal characteristics challenging to discern precisely. In response to this challenge, we propose an internal defect detection algorithm that incorporates local mean decomposition-singular value decomposition (LMD-SVD) and weighted spatial-spectral entropy (WSSE). Initially, the LDV vibration signal undergoes denoising via LMD and the SVD algorithms to reduce noise interference. Subsequently, the distribution of each frequency in the scan plane is analyzed utilizing the WSSE algorithm. Since the vibrational energy of the frequencies caused by the defect resonance is concentrated in the defect region, its energy distribution in the scan plane is non-uniform, resulting in a significant difference between the defect resonance frequencies’ SSE values and the other frequencies’ SSE values. This feature is used to estimate the resonant frequencies of internal defects. Ultimately, the defects are characterized based on the modal vibration patterns of the defect resonant frequencies. Tests were performed on two concrete blocks with simulated cavity defects, using an ultrasonic transducer as the excitation device to generate ultrasonic vibrations directly from the back of the blocks and applying an LDV as the acquisition device to collect vibration signals from their front sides. The results demonstrate the algorithm’s capacity to effectively pinpoint the information on the location and shape of shallow defects within the concrete, underscoring its practical significance for concrete internal defect detection in practical engineering scenarios.
In order to realize the automatic classification of internal defects for non-contact nondestructive testing of concrete, a concrete multi-type defect classification algorithm based on the mixed strategy slime mold algorithm support vector machine (MSSMA-SVM) was proposed. The concrete surface’s vibration signal was obtained using a laser Doppler vibrometer (LDV) for four classification targets for no defect, segregation, cavity, and foreign matter concrete classification targets. The wavelet packet transform (WPT) decomposes the detected signals to get information on different frequency bands. The energy ratio change rate, energy ratio, and wavelet packet singular entropy of each node after the WPT were used as the feature input of MSSMA-SVM. The experimental results show that the designed MSSMA-SVM classifier can accurately detect the type, which provides a practical algorithm for classifying concrete defects by laser vibration measurement.
Imaging through a wavy water–air interface is challenging since light rays are bent by unknown amounts, leading to complex geometric distortions. Considering the restoration of instantaneous distorted images, this paper proposes an image recovery model via structured light projection. The algorithm is composed of two separate parts. In the first part, an algorithm for the determination of the instantaneous shape of the water surface via structured light projection is developed. Then, we synchronously recover the distorted airborne scene image through reverse ray tracing in the second part. The experimental results show that, compared with the state-of-the-art methods, the proposed method not only can overcome the influence of changes in natural illumination conditions for WAI reconstruction, but also can significantly reduce the distortion and achieve better performance.
Compared with point-to-point wireless optical communication systems, multi-faceted Optical Base Stations (OBSs) offer the advantages of supporting multi-user access and achieving omnidirectional dynamic communication. The emission structure of the multi-faceted OBSs, which offer wide beam coverage and ensure uniform distribution of optical signals, is essential for users to receive signals while in motion. This paper presents a modeling method for three-dimensional beam coverage based on the multi-faceted OBS architecture. Additionally, a Multi-Objective Particle Swarm Optimization (MOPSO) algorithm is used to optimize the configuration of the multi-faceted LED array by adjusting the deflection angles of the LED arrays and the emission half-angle of the LEDs at the OBS. These advancements aim to enhance beam coverage performance while also providing technical support for achieving omnidirectional communication in underwater optical wireless networks (UOWN).