Within the scope of concrete internal defect detection via laser Doppler vibrometry (LDV), the acquired signals frequently suffer from low signal-to-noise ratios (SNR) due to the heterogeneity of the concrete’s material properties and its rough surface structure. Consequently, these factors make the defect signal characteristics challenging to discern precisely. In response to this challenge, we propose an internal defect detection algorithm that incorporates local mean decomposition-singular value decomposition (LMD-SVD) and weighted spatial-spectral entropy (WSSE). Initially, the LDV vibration signal undergoes denoising via LMD and the SVD algorithms to reduce noise interference. Subsequently, the distribution of each frequency in the scan plane is analyzed utilizing the WSSE algorithm. Since the vibrational energy of the frequencies caused by the defect resonance is concentrated in the defect region, its energy distribution in the scan plane is non-uniform, resulting in a significant difference between the defect resonance frequencies’ SSE values and the other frequencies’ SSE values. This feature is used to estimate the resonant frequencies of internal defects. Ultimately, the defects are characterized based on the modal vibration patterns of the defect resonant frequencies. Tests were performed on two concrete blocks with simulated cavity defects, using an ultrasonic transducer as the excitation device to generate ultrasonic vibrations directly from the back of the blocks and applying an LDV as the acquisition device to collect vibration signals from their front sides. The results demonstrate the algorithm’s capacity to effectively pinpoint the information on the location and shape of shallow defects within the concrete, underscoring its practical significance for concrete internal defect detection in practical engineering scenarios.
Compared with point-to-point wireless optical communication systems, multi-faceted Optical Base Stations (OBSs) offer the advantages of supporting multi-user access and achieving omnidirectional dynamic communication. The emission structure of the multi-faceted OBSs, which offer wide beam coverage and ensure uniform distribution of optical signals, is essential for users to receive signals while in motion. This paper presents a modeling method for three-dimensional beam coverage based on the multi-faceted OBS architecture. Additionally, a Multi-Objective Particle Swarm Optimization (MOPSO) algorithm is used to optimize the configuration of the multi-faceted LED array by adjusting the deflection angles of the LED arrays and the emission half-angle of the LEDs at the OBS. These advancements aim to enhance beam coverage performance while also providing technical support for achieving omnidirectional communication in underwater optical wireless networks (UOWN).
Compared with point-to-point underwater wireless optical communication (UWOC) systems with a single direction, the underwater multi-faceted optical base station (OBS) offers independent fields of view and directions for each receiving detector, supporting multiple user access and mobile communication. This study aims at the issue of link interruptions and a limited communication area caused by restricted OBS receiver fields of view when underwater devices move. A field-of-view model and spatial angle diversity reception framework for the multi-faceted OBS in underwater channels have been developed, visualizing the effective reception field of the OBS. This model helps analyze the impact of multi-faceted OBS detector layouts on link performance in underwater environments. Furthermore, under constraints on the number of detectors, configuration adjustments are made to the field-of-view angles and deflection angles of detectors. Simulation results show that, under the same typical underwater environmental conditions, the optimized configuration reduces the blind area compared to the typical configuration, enhancing the effective spatial field of view of the OBS receiver by over 10%. The OBS’s effective communication coverage for mobile devices on different planes is also improved. This research provides a theoretical model and parameter configuration guidelines for the design of the underwater multi-faceted OBS.
Motivated by the requirements for wide field-of-view (FOV) reception in underwater wireless optical communication (UWOC) systems, this study investigates the performance of multi-faceted receivers based on various regular polyhedral geometries. A truncated Gumbel minimum distribution model with geometric boundary constraints is proposed in order to characterize the statistical properties of the minimum incidence deflection angle associated with the selected receiving facet. Numerical simulations demonstrate that the proposed model effectively captures the angular response characteristics of multi-faceted receivers, with the root mean square error (RMSE) of the fitted cumulative distribution function (CDF) below for all regular polyhedral structures. Furthermore, this paper evaluates the effects of different polyhedral structures and receiver FOVs on the bit error rate (BER) and outage probability. The results further show that system performance does not vary monotonically with the number of receiving facets. Under the constraints of the same total effective detection area and unified system parameters, the dodecahedral structure achieves the best performance in terms of average BER and outage probability, followed by the cube, whereas the icosahedral structure exhibits the worst performance. Taking typical link distances of 35–40 m as an example, the average BER of the dodecahedral structure is approximately one order of magnitude lower than that of the icosahedral structure. These findings provide design guidance for the structural design and parameter optimization of multi-faceted receivers in UWOC systems.