This paper summarizes the main results and contributions of the MagNet Challenge 2023, an open-source research initiative for data-driven modeling of power magnetic materials. The MagNet Challenge has (1) advanced the stateof-the-art in power magnetics modeling; (2) set up examples for fostering an open-source and transparent research community; (3) developed useful guidelines and practical rules for conducting data-driven research in power electronics; and (4) provided a fair performance benchmark leading to insights on the most promising future research directions. The competition yielded a collection of publicly disclosed software algorithms and tools designed to capture the distinct loss characteristics of power magnetic materials, which are mostly open-sourced. We have attempted to bridge power electronics domain knowledge with state-of-the-art advancements in artificial intelligence, machine learning, pattern recognition, and signal processing. The MagNet Challenge has greatly improved the accuracy and reduced the size of data-driven power magnetic material models. The models and tools created for various materials were meticulously documented and shared within the broader power electronics community.
16 March 2022 in IEEE Transactions on Energy Conversion
The arc permanent magnet motor (arc motor) is widely used in large telescope for its high efficiency and high power density. Due to the unique structure, the periodic end torque, cogging torque and flux harmonics will cause certain speed ripples which can affect the performance of the drive system. To solve these problems, the paper proposes a novel model predictive control (MPC) based on extended state observer and iterative learning control, where the MPC is equipped in speed loop and the disturbances estimated by the conventional extended state observer (ESO) are fed forward to the controller to improve the ability of disturbance rejection. A position dependent iterative learning control (ILC) is used to estimate the periodic disturbances at different speeds. The MPC calculates the q axis current reference with the compensation of ESO and ILC, which can have a fast response and disturbance rejection ability for periodic and nonperiodic disturbances. The stability of the proposed method is demonstrated by theoretical analysis. The experimental results validate the effectiveness of the proposed method at different speeds.
14 November 2022 in Mechanics of Advanced Materials and Structures
Mechanical metamaterials attract a lot of interest because of the peculiar mechanical properties. Especially in adjustment of Poisson’s ratio of structures, the auxetic mechanical metamaterials have shown their outstanding advantages. Some topology optimization methods are also used to optimize the auxetic structures. In this article, we propose a pixel design method for mechanical metamaterials arrangement based on topology optimization. Metamaterials optimized with two different objectives: the maximum stiffness (MS) and the maximum stiffness with minimum Poisson’s ratio (MSMP) are obtained by this method. The lattice of the metamaterial is in uniform size and its stiffness can be adjusted. The topology optimization is used to achieve the optimal stiffness distribution of the design area. Then, the stiffness distribution is pixelated according to the lattice size. The required metamaterials can be achieved by filling the lattice structure into this pixel image. The experimental results are consistent with the simulation.
21 May 2024 in IEEE Transactions on Power Electronics
This article proposes a physics-inspired multimodal feature fusion cascaded network (PI-MFF-CN) for data-driven magnetic core loss modeling based on MagNet database. The proposed methodology consists of two cascaded sub-models: the physics-inspired network model and the multimodal feature fusion network model. Firstly, a network model inspired by physics and related micromagnetism, is developed based on the Landau-Lifshitz-Gilbert (LLG) equation. It provides new sequence information (HLLG (t)) for the next cascaded core loss prediction model. This addresses the limitation where H(t) waveforms are unable to participate in the actual prediction process. With embedded physical micromagenetic parameters (A, K, Ms) in the gradient learning process of the neural network, the trained physics-inspired network can be regarded as the inverse model (B(t)→HLLG(t)) of LLG Equation having physical interpretability. Then, in order to address a series of challenges in multimodal information learning, a multimodal feature fusion-based network model is proposed. This approach combines the advantages of convolutional neural network (CNN) and fully connected neural network (FCNN) to learn hybrid sequence-scale data. Specifically, it employs parallel CNN branches for sequence feature mappings, followed by concatenating these mappings with other scalar data into an FCNN for global learning. To validate the effectiveness of the proposed method, this article trains and optimizes the proposed models based on MagNet database, and then a series of experiments including extensive material validation (Ferroxcube-3C90, 3C94 & TDK-N27, N30, N49, N87, etc.) were carried out. A series of experimental outcomes demonstrate that the proposed PI-MFF-CN-based method is generalized and robust in accurately predicting magnetic core losses.
This paper proposes a metasurface design approach with perforated labyrinthine path coil structure to manipulate the acoustic transmission with inexpensive materials. The medium in the labyrinthine path coils in this design is air, but not limited to air. A systematic approach has been proposed for the unit cell design of acoustic metamaterials with adjustable resonance peak frequencies and bandgap width. The theory demonstrates that the length of pipe segments determines resonance peak frequencies and the cross-sectional area ratio adjusts the bandgap width. The proposed design approach uses an equivalent pipe circuit based analytical model to design the high transmission (high pass) and high reflection (low pass) unit cell. The simulation and experiment has been performed to evaluate the validity of the theory. Although there exists some assumptions in the theory, the theory still has enough accuracy to guide the metasurface design illustrated by the simulation and experiment results.
7 September 2023 in IEEE Transactions on Energy Conversion
Conventional high frequency (HF) signal injection methods utilize saturation-induced inductance saliency to extract rotor position in surface-mounted permanent magnet synchronous motor (SPMSM). However, special attention needs to be paid to the resistance saliency caused by rotor eddy current loss, especially in the motor with a small inductance saliency ratio. Taking a 24-slot/4-pole SPMSM as an example, this research investigates the rotor anisotropic features and position tracking error under HF signal injection. Firstly, a parallel equivalent circuit is established to decouple the HF current responses, and the position tracking error under inductance- and resistance-based saliency tracking methods can be derived. Secondly, four finite element analysis models equipped with different rotor configurations are designed to compare the effects of rotor anisotropic features on position tracking accuracy. Thirdly, the HF signals are injected into the four models, and the current responses are analyzed by Fourier analysis. The simulation results demonstrate that the rotor loss has an impact on the HF impedance, leading to the phase shift of the negative sequence current and static position tracking error. Furthermore, through the solution of the HF equivalent impedance, the inverse model can accurately predict the tracking error caused by rotor anisotropy. Finally, the proposed tracking error prediction method is validated on an SPMSM platform and demonstrated high-accuracy prediction results. In short, the proposed method contributes to evaluating the anisotropic properties of the analyzed motor and enables accurate prediction of the position tracking error.