21 May 2024 in IEEE Transactions on Power Electronics
This article proposes a physics-inspired multimodal feature fusion cascaded network (PI-MFF-CN) for data-driven magnetic core loss modeling based on MagNet database. The proposed methodology consists of two cascaded sub-models: the physics-inspired network model and the multimodal feature fusion network model. Firstly, a network model inspired by physics and related micromagnetism, is developed based on the Landau-Lifshitz-Gilbert (LLG) equation. It provides new sequence information (HLLG (t)) for the next cascaded core loss prediction model. This addresses the limitation where H(t) waveforms are unable to participate in the actual prediction process. With embedded physical micromagenetic parameters (A, K, Ms) in the gradient learning process of the neural network, the trained physics-inspired network can be regarded as the inverse model (B(t)→HLLG(t)) of LLG Equation having physical interpretability. Then, in order to address a series of challenges in multimodal information learning, a multimodal feature fusion-based network model is proposed. This approach combines the advantages of convolutional neural network (CNN) and fully connected neural network (FCNN) to learn hybrid sequence-scale data. Specifically, it employs parallel CNN branches for sequence feature mappings, followed by concatenating these mappings with other scalar data into an FCNN for global learning. To validate the effectiveness of the proposed method, this article trains and optimizes the proposed models based on MagNet database, and then a series of experiments including extensive material validation (Ferroxcube-3C90, 3C94 & TDK-N27, N30, N49, N87, etc.) were carried out. A series of experimental outcomes demonstrate that the proposed PI-MFF-CN-based method is generalized and robust in accurately predicting magnetic core losses.
21 June 2023 in IEEE Transactions on Transportation Electrification
This paper presents the design and performance of an integrated magnetorheological fluid brake axial flux permanent magnet (IMRFB-AFPM) machine with two switchable operation modes: rotation and brake modes while the machine has two kinds of windings: armature winding in axial stators and braking winding in radial stator. In rotation mode, this machine is equal to a conventional AFPM machine with high torque density. When switching to brake mode, MR fluid is excited by braking winding and applies large damping stress to the rotor to brake it. This paper illustrates the machine topology, operation principles, and design flow of the proposed machine. Then, this paper analyzes the torque generation mechanism in two modes and applies parameters optimization to improve the torque capability of each mode. Due to the independence of the magnetic flux path, the parameters optimization is divided into two parts: AFPM part and IMRFB part. After the optimization process, the electromagnetic performances of the optimal IMRFB-AFPM machine are analyzed by finite element (FE) analysis. Finally, a prototype machine with the optimal geometric parameters is manufactured and verified experimentally. The experiment results agree well with FE analysis results, validating the feasibility and practicability of the proposed design.
8 March 2022 in IEEE Transactions on Magnetics
In this article, to improve space utilization of the joint module composed of the axial flux permanent magnet motor (AFPMM) and the magneto-rheological fluid (MRF) brake, a machine topology that integrates the MRF brake structure into the radial side of an AFPMM is proposed. The proposed machine can operate in the rotation mode under axial load current and the brake mode under radial load current. The mathematical model of MRF brake torque is derived based on Bingham’s equation, and the damping characteristic of MRF to the rotor in the rotation mode is calculated and analyzed. In addition, the finite element analysis (FEA) of the proposed machine is carried out, including magnetic field distributions, air-gap magnetic density, electromagnetic torque, and brake torque. Based on the simulation results, the influences of flux leakage generated by the machine topology on the proposed machine are discussed in detail. Finally, after modifying the brake torque model and excluding the impacts of the rotor speed, brake torque versus different radial load currents is plotted.
5 March 2025 in IEEE Transactions on Magnetics
This article presents the integration design of magnetorheological (MR) fluid brake-based external rotor permanent magnet synchronous motor (PMSM) for robotic arm applications. By adding the inner braking teeth to the stator with outer armature teeth, the MR fluid (MRF) brake is integrated into the interior of the external rotor PMSM. The multimode stator design can allow the proposed machine to operate in both rotation and brake modes while improving space utilization in a relatively simple structure. First, the integrated machine topology and the operation principle in rotation and brake modes are illustrated. Then, this article focuses on the design of the core structure related to integrated topology, conducting analyses and optimization, and summarizing design considerations. Furthermore, the electromagnetic (EM) performances of the proposed machine are evaluated using a finite element (FE) analysis. The rated average EM torque is 2.09 Nm and the brake torque is 2.14 Nm. The simulation results validate the feasibility of proposed integrated topology.
18 February 2025 in IEEE Transactions on Energy Conversion
This article proposes an improved surrogate-assisted adaptive design optimization method to optimize the magnetorheological fluid brake integrated axial flux permanent magnet machine (MRFBI-AFPMM) with different brake torque ratios ($R_{m}$). The proposed method addresses two critical challenges in design optimization: 1) To alleviate the calculation burden of repeated finite-element (FE) simulations, the local cascade ensemble (LCE) learning technique is introduced to build accurate surrogate models. The LEC learning method effectively addresses the bias-variance trade-off in the regression of MRFBI-AFPMM, ensuring efficient and accurate surrogate modeling. 2) The unknown axial outer radius ($R_{OA}$) of AFPM part poses great convergence challenges for optimization under target Rm constraint. To mitigate it, this article proposes an adaptive optimization strategy. It incorporates iterative ROA search to improve the optimization efficiency of the non-dominated sorting genetic algorithm-II (NSGA-II). Additionally, simplified analytical models of different torque indexes are derived and analyzed before optimization, providing clear guidance for defining design objectives and selecting sensitive structural parameters. The proposed method is applied to several cases with different Rm. A statistical comparison of the total time consumption for different optimization methods is conducted, validating the proposed method's superiority in computational efficiency. Finally, the FE and experimental results from Case 2 demonstrate the feasibility of proposed optimization method.
14 February 2025 in IEEE Transactions on Magnetics
This article presents a Bagging-GA-driven multi-objective optimization method for magnetorheological (MR) fluid brake-integrated permanent magnet synchronous machine (MRFB-I-PMSM) considering brake torque constraint. In order to effectively alleviate the calculation burden and mitigate the convergence challenges posed by the characteristics of the topology itself, the ensemble learning Bagging method is first aided to construct an accurate surrogate model ( ${T} _{\text {avg}}$ , ${T} _{\text {rip}}$ , and ${T} _{b}$ ) from finite element analysis (FEA)-based data, aiming to enhance the optimization efficiency of the genetic algorithm (GA). To reduce the convergence risk of multi-objective optimization in GA, this article opts not to directly optimize ${T} _{b}$ but rather to constrain it as a passive variable ( ${R} _{T}$ ) within a certain range related to ${T} _{\text {avg}}$ . Finally, the performances of the MRFB-I-PMSM with and without optimization are compared based on the FEA simulation, verifying the validity of the proposed method.