China’s total coal production in 2021 exceeded 4.13 billion tons, 52% of the world’s total. Coal gangue, a solid waste of coal mining accounts for 15–20% of coal production, when directly discharged on the ground surface as waste heaps, it occupies large areas of land and cause environmental pollution. This paper summarizes the existing gangue backfilling methods, their working principles, efficiency, and application status. The methods that are meeting Middle and Western China’s mining demands are discussed in detail. The state-of-the-art technologies that can realize high-efficiency, centralized, and large-scale underground backfilling of coal gangue are analyzed. This paper shows that the industrial implementation of these technologies can increase the current maximum disposal capacity of coal gangue by three times, reaching five million tons per year. The equipment innovation and automation are analyzed, and the environmental effect of coal gangue backfilling is discussed. This review offers inspirations and guidelines for coal gangue disposal and the environmental hazard reduction of coal mining.

Solid backfilling is an environmentally friendly method of coal mining. Backfilling hydraulic supports are important devices in solid backfill mining. In order to speed up the design and manufacturing process of them, this paper proposes a method of hydraulic support reformation and evaluation. The mechanical models of top-coal caving hydraulic support and backfilling hydraulic support were established to analyze the stress characteristics of the main structure. ABAQUS was used to establish the 3D numerical model to analyze the load-bearing characteristics, as well as verify the strength requirement. In addition, the structural characteristics, compaction characteristics, geological adaptation characteristics, and interference characteristics of the structure were analyzed using motion simulation. After reforming, the ramming force is just above 2.0 MPa, and the utilization ratio of the old parts of the top-coal caving hydraulic support is more than 50%, which saved the costs of the new backfilling hydraulic support and reduced the waste of idle top-coal caving hydraulic support. The successful application of the backfilling hydraulic support in the Tangshan mine showed the rationality of the reform design.