In this research work, we synthesised poly(methyl methacrylate) (PMMA) enriched with 2 wt.% zinc oxide nanoparticles (ZnO) through conventional heat polymerisation and characterised its microstructure. It was found that the distribution of ZnO nanoparticles was homogeneous through the volume of the PMMA. The mechanical testing of the PMMA-ZnO composite primarily included the determination of the compressive properties on real dentures, while density measurements were performed using a pycnometer. The testing of functional properties involved the identification of the colour of the new PMMA-ZnO composite, where pure PMMA acted as a control. In the second step, the PMMA-ZnO cytotoxicity assays were measured in vitro, which were shown to be similar to the control PMMA. Based on this, it could be concluded that the newly formed PMMA-ZnO composite did not induce direct or indirect cytotoxic effects in L929 cell cultures; therefore, according to ISO/DIN 10993-5:2009, this composite was categorised as non-cytotoxic.

The development of new multicomponent nanoparticles is gaining increasing importance due to their specific functional properties, i.e., synthesised new complex concentrated nanoparticles (CCNPs) in the form of powder using ultrasonic spray pyrolysis (USP) and lyophilisation from the initial cast Ag₂₀Pd₂₀Pt₂₀Cu₂₀Ni₂₀ alloy, which was in the function of the material after its catalytic abilities had been exhausted. Hydrometallurgical treatment was used to dissolve the cast alloy, from which the USP precursor was prepared. As a consequence of the incomplete dissolution of the cast alloy and the formation of Pt and Ni complexes, it was found that the complete recycling of the alloy is not possible. A microstructural examination of the synthesised CCNPs showed that round and mostly spherical (not 100%) nanoparticles were formed, with an average diameter of 200 nm. Research has shown that CCNPs belong to the group with medium entropy characteristics. A mechanism for the formation of CCNPs is proposed, based on the thermochemical analysis of element reduction with the help of H₂ and based on the mixing enthalpy of binary systems.

A stone chest found in 1971 near one of the largest early Christian basilicas in Northern Dalmatia (Croatia) contained brass tiles decorated with various biblical scenes. An archaeological study confirmed the thesis that the fragments of brass tiles are most likely the remains of a wooden chest made in the 4th century AD, and that this is one of the best preserved archaeological finds of its kind in the world as one of the biblical scenes shows Mary, together with a record of her name (Maria). Based on the preserved brass tiles, a reconstruction of the wooden chest was made in 1973 with tiles glued onto a plastic frame. Subsequent studies have shown that such a reconstruction was not adequate, as some of the brass tiles were destroyed (disintegrated), and they were not connected properly into a whole that could represent the original. For the new reconstruction of this archaeological object it was necessary to carry out a material analysis, including the chemical composition of the brass tiles, as well as to find a solvent for the glue which could be used to remove the brass tiles from the plastic framework without any additional destruction. Based on extensive investigations and material analyses including the following techniques (SEM, EDX, FTIR, DSC), the starting points for the restoration process of the wooden chest with brass tiles were set, as well as the proposal for the appearance of the new chest.