Energy harvesting from piezoelectric materials is quite common and has been studied for the past few decades, but, recently, there have been a lot of new advancements in harnessing electrical energy via piezoelectric materials. In this regard, several studies were carried out in electrochemistry and fluid flow. Furthermore, consideration of productive and valuable resources is important to meet the needs of power generation. For this purpose, energy harvesting from fluids such as wind and water is significant and must be implemented on a large scale. So, developing self-powering devices can resolve the problem like that, and piezoelectric materials are gaining interest day by day because these materials help in energy generation. This review paper discusses different techniques for harnessing energy from fluid flows using piezoelectric materials. In addition, various vibration-based energy-harvesting mechanisms for improving the efficiency of piezoelectric energy harvesters have also been investigated and their opportunities and challenges identified.

Energy harvesting from piezoelectric materials is quite common and has been studied for the past few decades. But recently, there have been a lot of new advancements in harnessing energy via piezoelectric materials. In this regard, several studies were carried out in analytical chemistry. This paper provides a detailed review of different piezoelectric materials, their structures, their fabrication processes, and their applications in analytical chemistry. Detection of the various gases percentage in ambient air is a valuable analytical chemistry technique. Additionally, the benefits of using piezoelectric materials, i.e., crystal for gas and liquid chromatography, virus detection including COVID-19 virus detection, water determination, trace metal analysis and the ability to measure micro weights with quartz crystal with some other applications are also described in this review. Energy harvesting is incredibly important and must be implemented on a large scale. So, developing self-powering devices can resolve the problems, and piezoelectric materials are gaining interest day by day because these materials help in energy generation.

Piezoelectric actuators are widely used in many fields such as medical instruments, optics, and aerospace due to their small size and high reliability. Piezoelectric cantilever actuators are used in different configurations such as unimorph and bimorph. In this paper, a 3-D lead zirconate titanate (PZT) bimorph was modeled in COMSOL Multiphysics software for investigation of series and parallel configuration. Theoretical analysis has been developed for the measurement of deformation of a piezoelectric cantilever in inverse piezoelectric effect. The experiment was also performed to examine the deformation of piezoelectric bimorph cantilever. It is found that under a constant applied electric field of 100 V bimorph piezoelectric actuator produces maximum deformation at 100 mm length, 30 mm width, and 20 mm thickness. It is also found that piezoelectric series benders have relatively less deformation than piezoelectric parallel benders. Experimental results show good agreement with theoretical and Numerical results.

According to the demand of the present world, as everything needs to be economically viable and environment-friendly, the same concept applies to machining operations such as drilling, milling, turning, and grinding. As these machining operations require different lubricants, nanofluids are used as lubricants according to the latest technology. This paper compares different nanofluids used in the same machining operations and studies their effects. The variation in the nanofluid is based on the type of the nanoparticle and base fluid used. These nanofluids improve the lubrication and cooling in the machining operations. They also aid in the improvement in the surface roughness, cutting forces, cutting temperature of the workpiece, and tool life in the overall process taking place. It is worth noting that nanofluids are more effective than simple lubricating agents. Even within the nanofluid, the hybrid type is the most dominating, and helps to obtain a maximum efficiency through certain machining processes.