This paper presents a low-offset comparator based on n-type amorphous indium gallium zinc oxide thin-film transistors (TFTs). An a-Si:H TFT model was adapted to fit the electrical characterization data obtained for these devices. The proposed comparator comprises three pre-amplification stages, a positive-feedback analog latch and a fully dynamic digital latch. Simulation results show that the proposed circuit can work at several tens of kHz, with an accuracy of the order of 10 mV, considering a supply voltage of 10 V and a current consumption of 380 μA. Monte-Carlo simulations exhibit a 1-sigma random offset voltage smaller than 10 mV and 40 mV, respectively, with and without using autozeroing techniques.
In this paper, the most suited analog-to-digital (A/D) converters (ADCs) for Internet of Things (IoT) applications are compared in terms of complexity, dynamic performance, and energy efficiency. Among them, an innovative hybrid topology, a digital–delta (Δ) modulator (ΔM) ADC employing noise shaping (NS), is proposed. To implement the active building blocks, several standard-cell-based synthesizable comparators and amplifiers are examined and compared in terms of their key performance parameters. The simulation results of a fully synthesizable Digital-ΔM with NS using passive and standard-cell-based circuitry show a peak of 72.5 dB in the signal-to-noise and distortion ratio (SNDR) for a 113 kHz input signal and 1 MHz bandwidth (BW). The estimated is close to 16.2 fJ/conv.-step.