Mahrukh Sadaf

Dr. Mahrukh Sadaf

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
Verified
Journal Article
Open access
PDF file
MSMahrukh Sadaf
Mahrukh Sadaf
MBMario Bragaglia
Mario Bragaglia
LPLidija Slemenik Perše
Lidija Slemenik Perše
Francesca NanniFrancesca Nanni
Francesca Nanni
Additive manufacturing (AM) has attracted huge attention for manufacturing metals, ceramics, highly filled composites, or virgin polymers. Of all the AM methods, material extrusion (MEX) stands out as one of the most widely employed AM methods on a global scale, specifically when dealing with thermoplastic polymers and composites, as this technique requires a very low initial investment and usage simplicity. This review extensively addresses the latest advancements in the field of MEX of feedstock made of polymers highly filled with metal particles. After developing a 3D model, the polymeric binder is removed from the 3D-printed component in a process called debinding. Furthermore, sintering is conducted at a temperature below the melting temperature of the metallic powder to obtain the fully densified solid component. The stages of MEX-based processing, which comprise the choice of powder, development of binder system, compounding, 3D printing, and post-treatment, i.e., debinding and sintering, are discussed. It is shown that both 3D printing and post-processing parameters are interconnected and interdependent factors, concurring in determining the resulting mechanical properties of the sintered metal. In particular, the polymeric binder, along with its removal, results to be one of the most critical factors in the success of the entire process. The mechanical properties of sintered components produced through MEX are generally inferior, compared with traditional techniques, as final MEX products are more porous.

16 November 2022 in Polymers
Verified
Journal Article
Open access
PDF file
MSMahrukh Sadaf
Mahrukh Sadaf
SCSantiago Cano
Santiago Cano
Joamin Gonzalez-GutierrezJoamin Gonzalez-Gutierrez
Joamin Gonzalez-Gutierrez
MBMario Bragaglia
Mario Bragaglia
SSStephan Schuschnigg
Stephan Schuschnigg
Francesca NanniFrancesca Nanni
Francesca Nanni
This work aims to better understand the type of thermoplastic binders required to produce highly loaded copper filaments that can be successfully printed via low-cost filament-based material extrusion (MEX). Compounding feedstock material with 55 vol.% of copper and three multi-component binder systems has been performed. The MEX behavior of these feedstocks was evaluated by depositing material at different speeds and appropriately selecting the extrusion temperature depending on the binder composition. The rest of the MEX parameters remained constant to evaluate the printing quality for the different feedstocks. Printable filaments were produced with low ovality and good surface quality. The filaments showed good dispersion of the powder and polymeric binder system in SEM analysis. The feedstock mechanical properties, i.e., the tensile strength of the filament, were sufficient to ensure proper feeding in the MEX machine. The viscosity of the feedstock systems at the adjusted printing temperatures lies in the range of 102–103 Pa·s at the shear rate of 100–1000 s−1, which appears to be sufficient to guarantee the correct flowability and continuous extrusion. The tensile properties vary greatly (e.g., ultimate tensile strength 3–9.8 MPa, elongation at break 1.5–40.5%), and the most fragile filament could not be reliably printed at higher speeds. Micrographs of the cross-section of printed parts revealed that as the printing speed increased, the porosity was minimized because the volumetric flow of the feedstock material increased, which can help to fill pores. This study offers new insights into the feedstock requirements needed to produce low-cost intricate copper components of high quality in a reliable and efficient manner. Such components can find many applications in the electronics, biomedical, and many other industries.

21 February 2024 in Journal of Materials Research and Technology
Verified
Journal Article
Open access
MSMahrukh Sadaf
Mahrukh Sadaf
SCSantiago Cano
Santiago Cano
MBMario Bragaglia
Mario Bragaglia
SSStephan Schuschnigg
Stephan Schuschnigg
Christian KuklaChristian Kukla
Christian Kukla
Joamin Gonzalez-GutierrezJoamin Gonzalez-Gutierrez
Joamin Gonzalez-Gutierrez

7 October 2024 in Periodontal and Implant Research
Verified
Journal Article
Closed access
PDF file
SASyed Ahmed Ali
Syed Ahmed Ali
YAYumna Ali
Yumna Ali
MSMahrukh Sadaf
Mahrukh Sadaf

12 June 2026 in Preprints.org
Verified
Preprint
Open access
PDF file
MAMuhammad Shahid Arshad
Muhammad Shahid Arshad
MSMahrukh Sadaf
Mahrukh Sadaf
Mohor MihelčičMohor Mihelčič
Mohor Mihelčič
SKSpomenka Kobe
Spomenka Kobe
BSBoris Saje
Boris Saje
KRKristina Zuzek Rozman
Kristina Zuzek Rozman
Highly filled magnetic filaments require binder systems that balance powder loading, melt flow, filament strength, and strand stability during material extrusion (MEX). Here, a polyolefin-based binder composed of a thermoplastic elastomer and grafted polyolefin (TPE + gPO) was used to prepare SmFeN- and SrFe12O19-based magnetic filaments. The feedstocks were compounded, extruded into 2.85 mm filaments using a single-screw extrusion line with automatic spooling, and printed by MEX into ring-shaped specimens. Thermogravimetric analysis confirmed high powder contents, with residual masses of approximately 89 wt.% for SmFeN and 85 wt.% for SrFe12O19. The filaments showed good dimensional control, with a diameter of 2.85 ± 0.07 mm and ovality <= 0.017 mm. Small-amplitude oscillatory rheology at 200-240 °C showed pronounced shear-thinning behavior and an elastic-dominant response (G’ > G’’) over 0.01-100 Hz, supporting flow through the nozzle and shape retention after deposition. Mechanical testing confirmed sufficient handling performance, with maximum flexural stress of 36.1 ± 0.1 MPa for SrFe12O19 and flexural modulus up to 5.5 ± 0.2 GPa for SmFeN. The results demonstrate that the TPE + gPO binder provides a suitable processing window for highly filled magnetic filaments for MEX-printed bonded magnets.

10 September 2026 in Journal of Materials Science
Verified
Journal Article
Closed access
PDF file
ANAsghar Nazir
Asghar Nazir
SRSundas Rani
Sundas Rani
MSMahrukh Sadaf
Mahrukh Sadaf
SJSara Jameel
Sara Jameel
WAWaheed Ahmad
Waheed Ahmad