Jelena Lubura Stošić

Dr. Jelena Lubura Stošić

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 November 2022 in Electronics
Verified
Journal Article
Open access
PDF file
JSJelena Lubura Stošić
Jelena Lubura Stošić
LPLato Pezo
Lato Pezo
MIRELA ALINA SANDUMIRELA ALINA SANDU
MIRELA ALINA SANDU
VVViktoria Voronova
Viktoria Voronova
Francesco DonsìFrancesco Donsì
Francesco Donsì
Neven VoćaNeven Voća
Neven Voća
In this study, an evaluation of food waste generation was conducted, using images taken before and after the daily meals of people aged between 20 and 30 years in Serbia, for the period between 1 January and 31 April in 2022. A convolutional neural network (CNN) was employed for the tasks of recognizing food images before the meal and estimating the percentage of food waste according to the photographs taken. Keeping in mind the vast variates and types of food available, the image recognition and validation of food items present a generally very challenging task. Nevertheless, deep learning has recently been shown to be a very potent image recognition procedure, while CNN presents a state-of-the-art method of deep learning. The CNN technique was implemented to the food detection and food waste estimation tasks throughout the parameter optimization procedure. The images of the most frequently encountered food items were collected from the internet to create an image dataset, covering 157 food categories, which was used to evaluate recognition performance. Each category included between 50 and 200 images, while the total number of images in the database reached 23,552. The CNN model presented good prediction capabilities, showing an accuracy of 0.988 and a loss of 0.102, after the network training cycle. The average food waste per meal, in the frame of the analysis in Serbia, was 21.3%, according to the images collected for food waste evaluation.

3 August 2022 in Polymer International
Verified
Journal Article
Closed access
JSJelena Lubura Stošić
Jelena Lubura Stošić
PKPredrag Kojic
Predrag Kojic
BIBojana Ikonić
Bojana Ikonić
JPJelena Pavličević
Jelena Pavličević
DGDragan Govedarica
Dragan Govedarica
OBOskar Bera
Oskar Bera

31 March 2023 in Polymers
Verified
Journal Article
Open access
PDF file
JSJelena Lubura Stošić
Jelena Lubura Stošić
PKPredrag Kojic
Predrag Kojic
JPJelena Pavličević
Jelena Pavličević
BIBojana Ikonić
Bojana Ikonić
DBDario Balaban
Dario Balaban
OBOskar Bera
Oskar Bera
The kinetic model, encompassing the curing and reversion phenomena of the NR/SBR rubber vulcanization process, was developed by means of the finite element method simultaneously with heat transfer equations, including heat generation due to curing reactions. The vulcanization simulation was conducted for three spheres of different diameters (1, 5 and 10 cm) and two rubber wheels, one of which was a commercial product of the rubber industry. The proposed advanced simulation model, based on products’ two-dimensional axisymmetry, includes cooling after vulcanization, during which the crosslinking reactions continue to take place as a result of the products’ heated interiors. As a criterion for removing the product from the mold, an average vulcanization degree of 0.9 was set, whereby, during cooling, the vulcanization degree increases, due to crosslinking reactions. Based on the minimal difference between the maximal and minimal vulcanization degrees, which did not exceed a value of 0.0142, the optimal process parameters for each product were determined, achieving homogeneity and obtaining high-quality rubber products, while simultaneously ensuring a more efficient vulcanization process and enhanced cost effectiveness for the rubber industry.

31 October 2024 in Processes
Verified
Journal Article
Open access
PDF file
SSSiniša Simić
Siniša Simić
SVSenka Vidovic
Senka Vidovic
JSJelena Lubura Stošić
Jelena Lubura Stošić
KFKatarina Filipović
Katarina Filipović
KAKrunoslav Aladić
Krunoslav Aladić
Aleksandra GavaricAleksandra Gavaric
Aleksandra Gavaric
The rise of the global tea industry market, influenced by the growing demands for healthier diet options, resulted in the constant increase in herbal tea production. In accordance, increased production leads to increased waste generation, especially in the area of filter tea production, which generates waste in the form of powdered plant material with particle sizes lower than 0.315 mm. The generated amount of this powdered plant material, also called herbal dust, can vary in the range from 10 to 40% of the total processed plant, and it is often considered waste only due to its size. Therefore, within this study, ultrasound-assisted extraction (UAE) was utilized for the extraction of green tea (Camellia sinensis L.), lemon balm (Melissa officinalis L.), and hibiscus (Hibiscus sabdariffa L.) herbal dust, and the quality of the obtained extracts was evaluated in terms of total phenolic content (TPC) and phenolic profile. In addition, UAE was conducted on the three different amplitudes (20, 60, and 100%) and two different extraction times (5 and 10 min) in order to investigate and compare the influence of different extraction parameters. The results showed that the maximum TPC for green tea, hibiscus, and lemon balm herbal dust was 152.91 ± 0.74, 60.63 ± 0.10, and 356.22 ± 3.13 mg GAE/g DE, respectively. HPLC analysis conducted for all of the obtained extracts confirmed the presence of several phenolic compounds, with the highest concentrations of epigallocatechin gallate (EGCG) for the extracts of green tea, and neochlorogenic acid for hibiscus herbal dust extracts. The HPLC analysis of the lemon balm extracts recorded the highest concentration of rosmarinic acid for all of the UAE conditions. The results reported within this study indicate that previously considered waste, herbal dust plant material can be successfully extracted by application of UAE and that the obtained extracts exhibit concentrations of bioactive compounds comparable to the extracts of the commercially available plant material.

21 May 2023 in Polymers
Verified
Journal Article
Open access
PDF file
JSJelena Lubura Stošić
Jelena Lubura Stošić
OKOlga Kočková
Olga Kočková
BSBeata Strachota
Beata Strachota
OBOskar Bera
Oskar Bera
EPEwa Pavlova
Ewa Pavlova
ASAdam Strachota
Adam Strachota
Natural rubber composites were reinforced by the co-fillers ‘hydrochar’ (HC), obtained by hydrothermal carbonization of hardwood sawdust and commercial carbon black (CB). The content of the combined fillers was kept constant while their ratio was varied. The aim was to test the suitability of HC as a partial filler in natural rubber. Due to its larger particle size and hence smaller specific surface area, large amounts of HC reduced the crosslinking density in the composites. On the other hand, due to its unsaturated organic character, HC was found to display interesting chemical effects: if it was used as the exclusive filler component, it displayed a very strong anti-oxidizing effect, which greatly stabilized the rubber composite against oxidative crosslinking (and hence embrittlement). HC also affected the vulcanization kinetics in different ways, depending on the HC/CB ratio. Composites with HC/CB ratios 20/30 and 10/40 displayed interesting chemical stabilization in combination with fairly good mechanical properties. The performed analyses included vulcanization kinetics, tensile properties, determination of density of permanent and reversible crosslinking in dry and swollen states, chemical stability tests including TGA, thermo-oxidative aging tests in air at 180 °C, simulated weathering in real use conditions (‘Florida test’), and thermo-mechanical analyses of degraded samples. Generally, the results indicate that HC could be a promising filler material due to its specific reactivity.

26 February 2023 in Polymers
Verified
Journal Article
Open access
PDF file
JSJelena Lubura Stošić
Jelena Lubura Stošić
LKLibor Kobera
Libor Kobera
SASabina Abbrent
Sabina Abbrent
EPEwa Pavlova
Ewa Pavlova
BSBeata Strachota
Beata Strachota
ASAdam Strachota
Adam Strachota
A new generation biomass-based filler for natural rubber, ‘hydrochar’ (HC), was obtained by hydrothermal carbonization of hardwood waste (sawdust). It was intended as a potential partial replacement for the traditional carbon black (CB) filler. The HC particles were found (TEM) to be much larger (and less regular) than CB: 0.5–3 µm vs. 30–60 nm, but the specific surface areas were relatively close to each other (HC: 21.4 m2/g vs. CB: 77.8 m2/g), indicating a considerable porosity of HC. The carbon content of HC was 71%, up from 46% in sawdust feed. FTIR and 13C-NMR analyses indicated that HC preserved its organic character, but it strongly differs from both lignin and cellulose. Experimental rubber nanocomposites were prepared, in which the content of the combined fillers was set at 50 phr (31 wt.%), while the HC/CB ratios were varied between 40/10 and 0/50. Morphology investigations proved a fairly even distribution of HC and CB, as well as the disappearance of bubbles after vulcanization. Vulcanization rheology tests demonstrated that the HC filler does not hinder the process, but it significantly influences vulcanization chemistry, canceling scorch time on one hand and slowing down the reaction on the other. Generally, the results suggest that rubber composites in which 10–20 phr of CB are replaced by HC might be promising materials. The use of HC in the rubber industry would represent a high-tonnage application for hardwood waste.