Shuo Zhang

Prof. Dr. Shuo Zhang

Institute for Machine Elements and Systems Engineering, RWTH Aachen University, Aachen, North Rhine-Westphalia, Germany
orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 January 2023 in Lubricants
Verified
Journal Article
Open access
PDF file
YWYujun Wang
Yujun Wang
GJGeorg Jacobs
Georg Jacobs
FKFlorian König
Florian König
SZShuo Zhang
Shuo Zhang
SGStephan von Goeldel
Stephan von Goeldel
Adequately designed and positioned surface textures are recognized as a promising way to increase load-carrying capacity and reduce frictional losses of journal bearings. The aim of this work is to analyze the local lubrication mechanisms of textures in journal bearings from microflow perspective, while considering the interactions between textures and the film formation in the whole bearing. For this purpose, hydrodynamic lubrication models of textured journal bearings are built. The results show that placing textures downstream of the high-pressure region leads to a reduced friction force, with a less severe loss of load-carrying capacity. The effects of textures on the load-carrying capacity include the positive micro-hydrodynamic pressure effect and the negative effect caused by the discontinuity of the high-pressure region. The micro-hydrodynamic pressure of textures can be generated on one hand by limiting pressure drop (cavitation) in the divergent gap and on the other hand by the inertia effect. For the friction, the vortex inside textures affects the friction force by influencing the maximum shear stress at the minimum oil film. In turn the vortex is influenced by the bearing lubrication film. The research provides the fundamental reference and theoretical basis for the design and optimization of textured journal bearings.

20 March 2023 in Forschung im Ingenieurwesen
Verified
Journal Article
Open access
PDF file
SZShuo Zhang
Shuo Zhang
GJGeorg Jacobs
Georg Jacobs
SVSeyedmohammad Vafaei
Seyedmohammad Vafaei
SGStephan von Goeldel
Stephan von Goeldel
FKFlorian König
Florian König
Nowadays, more than 90% of all rolling element bearings are grease lubricated. Grease releases oil to separate the contacting surfaces by forming a stable oil film, thus resulting a long service life of a bearing. The film thickness is usually calculated by assuming fully flooded conditions. However, if the amount of released oil is insufficient, the film thickness will be reduced, which is termed as starvation. Grease lubricated rolling bearings have the risk of starvation even at fairly moderate speeds, which implies a high risk of wear and bearing failure. To reduce this risk, an accurate starvation model to predict film thickness under starvation is needed. In this contribution, a new starvation model based on the CFD method is used. The effects of starvation on film thickness and surface deformation are analyzed. For starved condition, film thickness at contact sides still remains fully flooded but decreases around contact center line because of the spring-back resilience of the material. Meanwhile, with increasing speed, the maximum deformation increases.

18 December 2025 in Tribology International
Verified
Journal Article
Open access
SZShuo Zhang
Shuo Zhang
BKBenjamin Klinghart
Benjamin Klinghart
GJGeorg Jacobs
Georg Jacobs
JXJianlong Xiao
Jianlong Xiao
YWYujun Wang
Yujun Wang
MBMarius Bürger
Marius Bürger

18 February 2026 in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
Verified
Journal Article
Open access
MBMarius Bürger
Marius Bürger
GJGeorg Jacobs
Georg Jacobs
FKFlorian König
Florian König
MRMerle Reimers
Merle Reimers
SZShuo Zhang
Shuo Zhang
Every year, significant amounts of non-biodegradable, toxic lubricants enter the environment. While legislative measures are being taken to reduce the environmental impact of this pollution, demand for environmentally acceptable lubricants (EAL) is increasing. These EALs differ in terms of their base oil and additives, thereby having a significant influence on the degradation behavior and degradation-related changes of tribological performance like oil film formation or boundary layer formation. However, the sensitivity of EALs to different degradation paths is not yet known. Therefore, the aim of this study is to determine the sensitivity of different lubricants to degradation based on their change in tribological performance. For this purpose, an ester- and polyglycol-based EAL as well as a mineral oil (polyalphaolefin) were degraded synthetically by oxidative and hydrolytic degradation. The degraded lubricants are visually, rheologically and chemically analyzed. In addition, the tribological performance in terms of oil film formation and tribological boundary layer formation was studied in a ball-on-disc tribometer. Afterwards the results are compared to their corresponding fresh lubricants. For the tested ester-based EAL no significant sensitivity to degradation could be shown, as no significant change in tribological performance occurred. Both polyalphaolefin and polyglycol proved to be sensitive to degradation leading to a significant reduction in the tribological boundary layer thickness. These results show, that mineral oil-based lubricants and EALs, as well as EALs themselves, differ in terms of their sensitivity to degradation. These effects must be considered in qualification process of lubricants.

4 November 2022 in Scientific Reports
Verified
Journal Article
Open access
PDF file
MBMaike Bode
Maike Bode
SZShuo Zhang
Shuo Zhang
MTMark N. Terwolbeck
Mark N. Terwolbeck
CTCaroline Molavi Tabrizi
Caroline Molavi Tabrizi
PSPaul Sprenger
Paul Sprenger
ABAlexandra Barabasch
Alexandra Barabasch