Lubricants for stern tube systems are subject to increasingly stringent requirements in terms of environmental compatibility, as any lubricant leakage leads to contamination of the sea. As a result, interest in environmentally acceptable lubricants (EALs) is increasing. Biodegradable ester lubricants represent a possible alternative to conventional, mineral oil-based lubricants. In addition to environmental compatibility requirements, these ester lubricants must also meet tribological requirements. In this study, suitable tribometers were therefore combined in a pre-screening method to cost-effectively test lubricants for their tribological requirements (friction efficiency, wear protection and scuffing capacity). For this purpose, the contact parameters are transferred from the real conditions in the stern tube system’s journal bearing and from the standardized component tests (FZG for gears and FE8 for rolling bearings) to tribological model tests on a Mini-Traction-Machine (MTM, PCS Instruments). The result of the study is a method for the pre-screening of EALs under the application-related journal bearing and standardized component test conditions, respectively. The results show an influence of the lubricant composition on the friction efficiency in fluid friction as well as the transition point from fluid to mixed friction. Furthermore, an influence of the lubricant composition on the scuffing capacity could be shown. The results of friction efficiency and scuffing capacity confirm also a high reproducibility for those pre-screening tests.
Wear occurs in sliding bearings as they often operate under mixed friction conditions in heavy-duty applications. Over the years, this has led to the development of wear simulations to predict wear evolution in sliding bearings. As part of wear evolution, bearing surface topography changes, and the bearing clearance varies due to temperature rise. For realistic wear predictions, both the surface topography changes and thermal effects must be considered. However, existing wear simulations do not accurately account for thermal effects during mixed friction. Effects such as local and transient temperature rise and thermal expansion alter bearing contact conditions (clearance) and thus influence wear evolution. Since these effects are not accurately modelled, realistic wear prediction in sliding bearings remains challenging with current approaches. Therefore, this paper introduces the extension of wear simulations by local and transient modelling of bearing temperature and clearance changes. The novelty lies in enabling the simultaneous consideration of transient thermal changes and surface topography changes during wear evolution. This enables a more realistic prediction of wear development in sliding bearings which can be applied to evaluate wear safety in bearing designs. The thermal wear simulation is validated using experimental measurement of friction torque, bearing temperature, and wear volume obtained from a radial sliding bearing test bench.