The aim of the current study was to evaluate the addition of different algal hydrocolloids (κ-carrageenan, ι-carrageenan, furcellaran, and sodium alginate) at three different concentrations (0.50, 0.75, and 1.00% w/w) on the physicochemical, viscoelastic, textural, and organoleptic properties of model cream cheese (CC) samples. On the whole, the highest viscoelastic moduli and hardness values of the CC samples were reported when κ-carrageenan was used. Furthermore, increasing the concentrations of the tested hydrocolloids led to increases in the viscoelastic moduli and hardness values of CC. Recommendations for softer-consistency CC production include the application of κ-carrageenan at a concentration of 0.50–0.75% (w/w) or the use of furcellaran and sodium alginate at a concentration of 1.00% (w/w). For the production of CC with a more rigid consistency, it is recommended to apply κ-carrageenan at a concentration higher than 0.75% (w/w).

The purpose of this work was to evaluate the selected physicochemical, rheological, and sensory properties of a new whey-enriched carrot juice beverage (carrot juice: whey ratios of 100:0; 95:5; 85:15; 75:25; 65:35) fermented with milk or water kefir starter cultures over a storage period of 21 days (at 4 ± 1 °C). In general, for all tested samples, the values of total soluble solids, pH, and density decreased with increasing storage time. In contrast, the values of ethanol, degree of fermentation, and total dissolved solids increased with the prolongation of the storage time. Furthermore, it was found that all the model samples exhibited pseudoplastic behavior. Based on the sensory analysis performed, samples containing 25% (w/w) whey were evaluated as the most acceptable. Last but not least, the present study can serve as a basis for optimizing the manufacturing technology of a novel fermented vegetable beverage enriched with whey.

The scope of the study was the evaluation of the selected physicochemical (O₂ and CO₂ contents, bitterness, color, total polyphenol content (TPC), turbidity, foaming stability) and sensory properties of Czech lager beer with different original wort extract (OWE) values (OWE of 10.0; 11.0; 11.5; 12.0% w/w) during a cold storage period of 6 months (4 ± 2 °C). The length of the cold storage period did not influence the values of dissolved O₂ and CO₂, bitterness, color and foam stability of the samples. Contrarily, the TPC, turbidity, and sensory attributes of the samples were affected by the course of cold storage. The OWE values did not affect the development of the parameters tested. All beer samples stored until the 5th month presented “very good” sensory characteristics. Cold storage of beer is advantageous in order to maintain its freshness and sensory attributes at the highest level for the final consumer.

The current study was conducted to evaluate the effect of the addition of selected hydrocolloids [agar (AG), κ-carrageenan (KC), or gelatin (PG); as a total replacement for emulsifying salts] on the viscoelastic properties and microstructure of processed cheese (PC) samples during a storage period of 60 days (at 6 ± 2 °C). In general, PC viscoelastic properties and microstructure were affected by the addition of hydrocolloids and the length of storage time. The evaluated PC reported a more elastic behavior (G′ > G″) over the viscous one. The highest values of viscoelastic moduli (G′; G″; G*) were recorded for PC samples manufactured with KC addition, followed by those prepared with AG and PG. The control sample presented values of viscoelastic moduli similar to those of the PG sample. All PC samples tested had fat globule size values lower than 1 μm. Moreover, PC with AG and KG addition presented similar microstructures and sizes of fat globules.

The aim of the study was to investigate the effect of potassium-based emulsifying salts (ES; 2% wt/wt concentration) with different phosphate chain lengths (dipotassium hydrogenphosphate [K₂HPO₄; DKP], tetrapotassium diphosphate [K₄P₂O₇; KTPP], pentapotassium triphosphate [K₅P₃O₁₀; TKPP]) on the physicochemical, viscoelastic, textural, tribological, thermal, and sensory properties of processed cheese (PC; 40% wt/wt DM, 50% wt/wt fat in DM) during a 60d storage period (6°C ± 2°C). On the whole, the hardness of all PC samples increased with the increasing chain length of ES (DKP < TKPP < KTPP) and the prolonging storage period. Moreover, the hardness results were in accordance with those of the rheological analysis. All PC samples exhibited a more elastic character (G' > G″; tan δ < 1). The type of potassium-based ES affected the binding of water into the structure of the PC. Furthermore, the study confirmed that the manufactured PC received optimal sensory scores, without any excessive bitterness. It could be concluded that the type of applied ES and storage length affected the functional properties of PC. Finally, the information provided in this study could serve as a tool for the dairy industry to help appropriately select potassium-based ES for PC manufacture with desired properties.