The purpose of this work was to evaluate the selected physicochemical, rheological, and sensory properties of a new whey-enriched carrot juice beverage (carrot juice: whey ratios of 100:0; 95:5; 85:15; 75:25; 65:35) fermented with milk or water kefir starter cultures over a storage period of 21 days (at 4 ± 1 °C). In general, for all tested samples, the values of total soluble solids, pH, and density decreased with increasing storage time. In contrast, the values of ethanol, degree of fermentation, and total dissolved solids increased with the prolongation of the storage time. Furthermore, it was found that all the model samples exhibited pseudoplastic behavior. Based on the sensory analysis performed, samples containing 25% (w/w) whey were evaluated as the most acceptable. Last but not least, the present study can serve as a basis for optimizing the manufacturing technology of a novel fermented vegetable beverage enriched with whey.

Whey is mostly generated during the production of cheese or curds. Nevertheless, the quantity of whey generated is substantial, with just fifty percent of the total utilised. Moreover, improper disposal of whey has a negative impact on the environment. The use of whey in beverage production is an innovative approach with the potential to expand the application possibilities of this by-product of the food industry. The article focuses on the composition and health benefits of whey, while the impact of improper disposal of whey into wastewater and the environmental impact are discussed. Included is a description of the production and properties of unfermented and fermented whey beverages. Finally, new technological processes used in the production of whey-based beverages are discussed.

The decarboxylation of the corresponding amino acids by microorganisms leads to the formation of biogenic amines (BAs). From a toxicological point of view, BAs can cause undesirable physiological effects in sensitive individuals, particularly if their metabolism is blocked or genetically altered. The current study aimed to monitor and evaluate the content of eight biogenic amines (BAs) in 232 samples of wines (white, rosé, red) produced in the Central European region (Zone B). White wines (180 samples), rosé wines (17 samples), and red wines (35 samples) were analyzed. High-performance liquid chromatography equipped with a ultraviolet–visible diode array detector (UV/VIS DAD) was applied to identify and quantify the BAs present in wines. In general, histamine (HIS), tyramine (TYM), putrescine (PUT), cadaverine (CAD), phenylethylamine (PEA), spermine (SPN) and spermidine (SPD) were detected in all tested wine samples. Tryptamine (TRM) was not present in any of the samples examined. In white and red wines, SPD, TYM, and PUT were most often detected. Regarding rosé wines, the three major BAs were SPN, TYM, and CAD. The BA content in red wines was generally higher than in rosé and white wines. However, HIS concentrations above the recommended limit of 10 mg/L were detected in 9% of the red wine samples. In addition, alarming levels of PUT, HIS, TYM, and PEA, with serious potential impact on consumer health, were recorded in two red wine samples. On the whole, the presence and concentrations of BAs in wine should be constantly evaluated, primarily because alcohol intensifies the hazardous effects of BAs.

In the current study, fermented whey-based beverage models with different levels of blackcurrant juice (0; 10; 20; 100% (w/w)) and furcellaran (0.25% and 0.50% (w/w)) were produced and evaluated. Physicochemical, rheological, mechanical vibration damping, and sensory analyses were performed. During fermentation (48 h), the values of pH, density, and total soluble solids decreased. On the other hand, the ethanol content during fermentation increased up to a final content in the range of 0.92–4.86% (v/v). The addition of furcellaran was effective in terms of sediment content decrease to a level of 0.25% (w/w). In general, the samples exhibited non-Newtonian pseudoplastic behaviour. The sensory analysis revealed that the sample with a composition of 20% (w/w) blackcurrant juice and 0.50% (w/w) furcellaran received the highest score.

The effect of the high-pressure homogenization (HPH) process (one-stage; applied pressure of 10 MPa and 20 MPa) and furcellaran addition (0.25% and 0.50%, w/w) on the physicochemical and rheological properties of chocolate milk drinks was evaluated. Non-homogenized samples and the milk sample used to produce all model chocolate milk drink samples were also evaluated for comparison. The addition of furcellaran and the HPH process significantly influenced the monitored characteristics of the model samples. In particular, the addition of furcellaran caused an increase in shear stress and viscosity, and HPH also had a noticeable effect on these rheological properties. From the results obtained, it can be concluded that the model samples of chocolate milk drinks exhibited a pseudoplastic behavior. Furthermore, the results of the physicochemical analyses showed a slight increase in dry matter and total soluble solids contents due to furcellaran addition. The solid particle sedimentation values of the tested samples decreased due to furcellaran addition (up to 11.99%.). In addition to the effect on rheological properties, the HPH regime slightly increased the sample’s pH values (6.80–6.81). The application of HPH and furcellaran addition may appear advantageous in manufacturing chocolate milk drinks (or dairy-based suspensions) with enhanced physical, flow and sensory properties.