The mechanical properties of carbon fiber-reinforced epoxy composites were identified by adding carbon-based nano-reinforcements, such as multi-wall carbon nanotubes (CNTs) and graphene platelets (GP), into the epoxy matrix by conducting suitable experiments. The main focus of this study is to compare the tensile modulus, tensile strength, flexural modulus, flexural strength, and thermal conductivity of carbon fiber-reinforced epoxy composites with nanoparticle reinforcement. The results revealed that adding CNTs and GP nanoparticles improved the mechanical properties compared to a pure carbon fiber-reinforced plastic composite. However, compared to CNTs, the GP’s addition has increased the mechanical properties of the CFRP composite. In addition, scanning electron microscopy (SEM) images were presented to explore the microstructural characterization of carbon fiber-reinforced nanoparticle-reinforced composites. Further, using numerical studies, the transverse modulus, major and minor Poisson’s ratio of the carbon fibre reinforced with CNT and GP particle reinforcement were estimated. The current study is applied to the efficient design of nanoparticle reinforced carbon fibre reinforced composites.
This study investigated the erosion wear behaviors of S-glass (G) and sisal (S) fibers reinforced with nanoclay (NC). Samples were fabricated using epoxy and polyester matrices through a hand lay-up process, consisting of four fiber layers (GSSG) with varying NC weight percentages (2, 4, 6 wt.%). Tests were conducted at room temperature using angular-shaped silica sand erodents impacting at 148 m/s at angles of 30°, 60°, and 90°. The results showed that erosion wear was highest at a 60° impact angle, indicating a semi-ductile nature of the composites. The hybrid NC polymer composite with 2 wt.% NC exhibited the highest erosion wear resistance at a 90° impingement angle. A significant reduction in wear rate was observed at 2 wt.% NC, with a 43% decrease in Polyester/GSSG and an 18% decrease in Epoxy/GSSG when comparing 60° and 90° impact angles. Polyester-reinforced composites demonstrated superior wear resistance compared to epoxy-reinforced ones. SEM analysis of the eroded surfaces revealed the wear mechanisms involved. These composites are anticipated to be used as high-speed machinery or aggressive environments, enhancing resistance to erosion wear.
9 August 2025 in Construction and Building Materials