Multi-static SARs from LEO orbits allow the single-pass high-resolution imaging and detection of moving targets. A coherent MIMO approach requires the generation of multi-band, thus orthogonal, signals, the fusion of which increases the system resolution. Up to now the synchronization capability of SAR signals of different satellites is critical. Here, we propose the use of photonics to generate, receive and distribute the radar signals in a coherent multi-static SAR constellation. Photonics overcomes issues in the implementation of MIMO SAR, allowing for the flexible generation of multi-band signals and centralized generation in a primary satellite with coherent distribution to all the secondary satellites of the SAR signals over FSO links. The numerical analysis shows the proposed system has a NESZ < −29.6 dB, satisfying the SAR system requirements. An experimental proof of concept based on COTS, for both signal up- and down-conversion, is implemented to demonstrate the system functionality, showing performance similar to the simulations. The implementation of the proposed systems with integrated technologies could reduce the system SWaP and increase robustness to vibrations. A design based on the consolidated SOI platform with the transfer printing-based hybrid integration of InP semiconductor optical amplifiers is proposed. The amplifiers compensate for the losses of the passive SOI waveguides, decreasing the overall conversion loss. The polarization multiplexing of the modulated and unmodulated combs to be sent from (to) the primary to (from) the secondary satellite over the FSO links avoids complex space-consuming optical filters requiring several control signals.

Multiple-input multiple-output (MIMO) radars offer significant advantages over conventional standalone radars in terms of target detection and localization capabilities. However, to fully exploit their potential, such systems require excellent time and phase synchronization among the central unit and the radar heads. Only recently, thanks to microwave photonics (MWP) techniques, it has been possible to develop the first coherent MIMO radar demonstrators. In this paper, a simulation tool in MATLAB programming language is proposed to model coherent MIMO radars based on MWP techniques in maritime surveillance applications. Moreover, a novel approach for estimating the radar cross section of extended maritime targets is presented. The system performance in co-located and distributed MIMO configuration, as well as in single- and multi-band operations, is evaluated by means of relevant key performance indicators (KPIs). Simulations are carried out in two close-to-reality scenarios. In the first, a co-located MIMO radar is mounted on top of a patrolling vessel. In the second, a distributed MIMO radar is deployed inside a port. The proposed KPIs are analyzed in terms of both geometric and frequency diversities of the system, laying the foundations for general system optimization criteria valid in any given surveillance application.

A numerical evaluation is conducted to assess the impact of distributing radio frequency (RF) signals through optical fiber links on the performance of a coherent multi-band multiple-input multiple-output (MIMO) radar system. The analysis focuses on scenarios where the antennas are widely separated in comparison to the employed signal wavelengths. The development of a model to quantify the phase noise (PN) induced on each RF band due to the signal transmission through optical fiber links between the centralized base station and each radar peripheral is described. Monte Carlo simulation results are collected to estimate the key performance indicators (KPIs) for varying standard single-mode fiber (SSMF) length and different PN contributions. The main contributors to the PN are revealed to be chromatic dispersion (CD), double Rayleigh scattering (DRS), and mechanical vibrations. In a shipborne scenario, a significant performance degradation occurs only when the length of the fiber links reaches approximately 20 km. Further, the PN impact has also been studied in a shipborne scenario to analyze the robustness of the system for worse phase noise level assumptions. The results reveal excellent robustness of the proposed centralized acquisition and processing approach in the presence of both very long fiber links and economically employed RF oscillators.