The Dual Active Bridge (DAB) converter is known for its advantageous characteristics, including bidirectionality, galvanic isolation, and soft-switching operation. However, achieving Zero Voltage Switching (ZVS) across the complete operation range is not guaranteed, particularly through a wide input–output voltage ratio. This paper explores the integration of the switching frequency as a control variable in the DAB converter to ensure ZVS operation across a wide voltage range, employing Single Phase Shift (SPS) modulation. The study evaluated the RMS and reactive currents under variable switching frequency, presenting the advantages of this approach. Moreover, it includes a design-oriented analysis of the ZVS limits and their relationship with the switching frequency, aiming to ensure ZVS at any operating point. Experimental results validated the theoretical analysis, while presenting the main advantages of variable switching frequency implementation.
In the literature, different DC/DC power electronic converters (PECs) have been found to interconnect high-voltage DC and low-voltage DC grids in the electric power distribution networks of aircraft. In this scenario, the dual-active-bridge (DAB) converter has been shown to be one of the most promising topologies. The main disadvantages of this PEC are the large output capacitance required to satisfy more electric aircraft (MEA) requirements and the high conduction losses produced in low-voltage power devices of (LV). Therefore, this paper proposes analytical models to determine the voltage ripple and root-mean-square (RMS) current in DC bus capacitors of DABs considering different modulation strategies. Moreover, an analysis of the design space in an MEA case study is performed to evaluate the influence of the design variables in power losses of power devices and peak-to-peak voltage ripple in DC bus capacitors. These models are useful for the design stage of this PEC, as well as to enable multi-objective optimization procedures by reducing the computational cost of these methodologies. Furthermore, the exploration of the switching frequency and limit of the modulation angle aid in reducing the resulting volume of the low-voltage DC capacitor.
This work presents the efficiency $(\eta)$ versus power density $(\rho)$ Pareto optimization of the main bidirectional isolated DC-DC Power Electronic Converters (PECs) proposed for the electric aircraft. The considered topologies are Dual-Active-Bridge (DAB) and Active-Bridge-Active-Clamp (ABAC). This optimization procedure aims to get a deep insight into the impact of the different design space variables on the converter performance. To this aim, the component models utilized to develop the optimization procedure are described in detail considering different magnetic materials, heatsink Cooling System Performance Index (CSPI), as well as capacitor and semiconductor technologies. Therefore, the design trade-offs that lead to the $\eta-\rho$ Pareto-front optimal results of these PEC topologies are described and compared in detail. In this context, DAB converter shows a slightly better $\eta-\rho$ trade-off with the considered components than the obtained for ABAC.