In the present paper, wave propagation of micro-sandwich beams is investigated. The sandwich beam is consisted of the core, top, and bottom layers which are corresponding to auxetic honeycomb, piezoelectric, and Two-Dimensional Functionally Graded Material (2D-FGM), respectively. The material properties of the 2D-FGM layer differ in both thickness and axial directions. The structure is under the electric field with respect to the existence of piezoelectric material. Giving the hypothesis of modified couple stress theory (MCST) for size effects and the refined zigzag theory (RZT) for mathematical modeling, the equations of motion are gained based on Hamilton’s principle. The wave velocity, escaping frequency, and cut-off frequency of the structure are computed through the analytical method. The influences of different components (e.g. geometric parameters, electric field, auxetic honeycombs core, electric field, size parameter, and gradient index) of 2D-FGM layer on the wave velocity of the micro-sandwich beam are evaluated. The results illustrate that the wave velocity which is calculated by the modified couple stress theory increases by about 2.5 times than that in classic theory. Moreover, the phase velocity increases as the geometrical components of auxetic honeycombs core are enhanced.
10 January 2023 in Waves in Random and Complex Media
Recently, nano- and micro air vehicles have been intensely attractive among researchers due to their small size and ultralightweight. Hence, in this article, wave propagation of micro air vehicle wings is studied based on mathematical modeling as the main novelty of this article. In addition, assuming porous functionally graded materials (FGM) and magnetostrictive nanocomposite layers for the wing for improving the stiffness and control of the wave propagation is another important innovation of this study. The effects of size are considered based on strain gradient theory and the Halpin-Tsai model is employed for calculating the effective material characteristic of the magnetostrictive nanocomposite layer. For modeling the structure mathematically, refined zigzag theory (RZT) is used. According to Hamilton's principle, the governing equations are gained and solved by exact solutions for obtaining the phase velocity, cut-off, and escape frequencies. In this novel work, influences of dispersion kinds of GPLs, various core and face sheets thickness, damping of structure, porosity constant, FG index, auxetic honeycombs core characteristics, size parameters, and magnetic field are investigated on wave propagation of the micro air vehicle wings. It is found that by imposing the magnetic field on the magnetostrictive layer, the wave velocity is enhanced.
Lightweight aluminum alloy components are often used to manufacture a variety of engineering components in many industries. In recent years, researchers have studied the effect of improving the mechanical properties of metal alloys by incorporating nano-carbon into its structure. In this study, the effect of the addition of 0.2, 0.5, and 1 wt% of multi-walled carbon nanotubes (MWCNTs) on the stress–strain behavior and creep phenomenon of an A356 aluminum alloy were studied. The effect of nickel coating on 0.2 wt% MWCNTs was also investigated. Samples were prepared using the stir-casting method. The results revealed that the grain size became finer when MWCNT nano-particulates were introduced. Although the MWCNTs were distributed homogeneously in the A356 matrix, as confirmed by FESEM analysis, there were some agglomerations observed in a specific area with dimensions smaller than 100 nm. Nevertheless, the addition of MWCNTs was found to be beneficial in enhancing the hardness of alloys containing 0.2 wt%, 0.2 wt% nickel-coated, 0.5 wt%, and 1 wt% MWCNTs by 9%, 24%, 32%, and 15%, respectively, as compared with the unreinforced A345 matrix. It was also found that the 0.5 wt% MWCNT-A356 matrix exhibited an improvement in the creep lifetime by more than two orders of magnitude.