This manuscript examines the design principle and real-world validation of a new miniaturized high-performance flower-shaped radiator (FSR). The antenna prototype consists of an ultracompact square metallic patch of 0.116λ₀ × 0.116λ₀ (λ₀ is the free space wavelength at 3.67 GHz), a rectangular microstrip feed network, and a partial metal ground plane. A novel, effective, and efficient approach based on open circuit loaded stubs is employed to achieve the antenna’s optimal performance features. Rectangular, triangular, and circular disc stubs were added to the simple structure of the square radiator, and hence, the FSR configuration was formed. The proposed antenna was imprinted on a low-cost F4B laminate with low profile thickness of 0.018λ₀, relative permittivity ε_r = 2.55, and dielectric loss tangent δ = 0.0018. The designed radiator has an overall small size of 0.256λ₀ × 0.354λ₀. The parameter study of multiple variables and their influence on the performance results has been extensively studied. Moreover, the impact of different substrate materials, impedance bandwidths, resonance tuning, and impedance matching has also been analyzed. The proposed antenna model has been designed, simulated, and fabricated. The designed antenna exhibits a wide bandwidth of 5.33 GHz ranging from 3.67 to 9.0 GHz at 10 dB return loss, which resulted in an 83.6% fractional impedance bandwidth; a maximum gain of 7.3 dBi at 8.625 GHz; optimal radiation efficiency of 89% at 4.5 GHz; strong intensity current flow across the radiator; and stable monopole-like far-field radiation patterns. Finally, a comparison between the scientific results and newly published research has been provided. The antenna’s high-performance simulated and measured results are in a good agreement; hence, they make the proposed antenna an excellent choice for modern smartphones’ connectivity with the sub-6 GHz frequency spectrum of modern fifth-generation (5G) mobile communication application.

This paper presents a comparative analysis of a long-term evolution advanced (LTE-A) and fifth-generation new radio (5G-NR), focusing on the effects of transient electromagnetic interference (EMI) caused by catenary–pantograph contact in a railway environment.A software-defined radio (SDR)-based prototype was developed to evaluate the performance of LTE-A and 5G-NR links under the influence of transient interference. The results show that both links experience considerable degradation due to interference at different centre frequencies. Performance degradation is proportional to the gain of interference. The measurement results show that both links experience considerable performance degradation in the presence of transient EMI.

In this work, we present a 2 × 2 near-field multi-input multiple-output (MIMO) prototype for bit-error-rate (BER) and error vector magnitude (EVM) measurements in a metal enclosure. The near-field MIMO prototype was developed using software-defined-radios (SDRs) for over-the-air transmission of QPSK modulated baseband waveforms. We checked the near-field MIMO BER and EVM measurements in three different scenarios in a highly reflecting metal enclosure environment. In the first scenario, the line-of-sight (LOS) communication link was investigated when the mode stirrer was stationary. In the stationary channel conditions, near-field MIMO BER and EVM measurements are performed. In the second scenario, BER and EVM measurements were performed in dynamic channel conditions when the mode stirrer was set to move continuously. In the third scenario, LOS communication near-field MIMO BER and EVM measurements were performed in stationary channel conditions but now in the presence of MIMO interference. In three different scenarios, near-field MIMO BER and EVM measurements were investigated at different Tx USRP gain values and in the presence of varying levels of MIMO interference.

In this work, we present a 2x2 near-field multi-input multiple-output (MIMO) prototype for bit-error-rate (BER) and error vector magnitude (EVM) measurements in a metal enclosure. The near-field MIMO prototype is developed using software-defined-radios (SDRs) for over-the-air transmission of QPSK modulated baseband waveforms. We check the near-field MIMO BER and EVM measurements in three different scenarios in a highly reflecting metal enclosure environment. In the first scenario, the line-of-sight (LOS) communication link is investigated when the mode-stirrer is stationary. In stationary channel conditions near-field MIMO BER and EVM measurements are performed. In the second scenario, BER and EVM measurements are performed in dynamic channel conditions when the mode-stirrer is set to move continuously. In the third scenario, LOS communication near-field MIMO BER and EVM measurements are performed in stationary channel conditions but now in the presence of MIMO interference. In three different scenarios, near-field MIMO BER and EVM measurements are investigated at different Tx USRP gain values and in the presence of varying levels of MIMO interference.

In contrast to parametric spectrum sensing, non-parametric spectrum sensing can effectively detect the primary user's presence or absence without prior information about the primary user. Particularly, non-parametric spectrum sensing can be useful in dynamic spectrum sharing. The secondary user must detect incumbents and peer secondary users in dynamic spectrum sharing. The secondary user can use the licensed spectrum if the primary user is not detected using its band. The primary user detection problem is the goodness-of-fit testing problem. In this work, we performed a hardware-in-the-loop evaluation of goodness-of-fit tests such as Cramer-von-Mises (CM), Anderson-Darling (AD) and Kolmogorov-Smirnov (KS) tests. We used a wideband radio transceiver RFSoC 4x2 from AMD and an F8 radio channel emulator to perform GoF tests.