Adriano Péres

Dr. Adriano Péres

orcid

Research Focus & Metrics

Academic Career Length

22Years (2005-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 July 2019 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
Tiago Davi Curi BusarelloTiago Davi Curi Busarello
Tiago Davi Curi Busarello
ARAndre Luiz de Sousa Marcondes Reuter
Andre Luiz de Sousa Marcondes Reuter
APAdriano Péres
Adriano Péres
Marcelo SimoesMarcelo Simoes
Marcelo Simoes
The staircase modulation strategy is the best choice for Asymmetric Cascaded H-bridge Multilevel Inverter (ACMI) because it makes the output voltage to present a high number of levels and makes one of the ACMI modules to operate at low frequency. However, the staircase modulation is usually employed without giving its deserved attention. This paper presents a clear understanding of the staircase modulation strategy and its applications in both isolated and grid-connected ACMI. The main novelty of this paper is the obtaining of the switching function for each module. The principle of operation is carefully described, also indicating how to command the ACMI transistors. The output voltage of the two superior modules is evaluated for different values of iterations. Special attention is given to the power distribution among the ACMI modules when the staircase modulation is applied. It is demonstrated how the power is processed in each module considering an ACMI with three modules. The analysis is presented showing the staircase modulation within a closed-loop control strategy for isolated and grid-connected modes of operation, showing that the content of this paper is valid for both modes. Experimental results clarify and show the efficacy of the content presented in this paper.

28 March 2018 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
Tiago Davi Curi BusarelloTiago Davi Curi Busarello
Tiago Davi Curi Busarello
AMAli Mortezaei
Ali Mortezaei
APAdriano Péres
Adriano Péres
Marcelo SimoesMarcelo Simoes
Marcelo Simoes
The conservative power theory (CPT) is a time-domain theory applicable to any periodic signal single- or polyphase system with or without a neutral conductor. The principle operation is the orthogonal decomposition of electrical variables, resulting in electrical quantities with physical meaning. An important feature of the CPT is the current decomposition. It consists of decomposing any current into five parts. The label of these parts is active current, reactive current, scattered active current, scattered reactive current, and generated current. This paper proposes the application of the current decomposition of the CPT in distributed energy resources (DERs). A supervisory controller (SC) uses the current decomposition in a load power-sharing strategy. The combination of these two issues is the main contribution of this paper. Moreover, the proposal of this paper is more attractive than the conventional droop strategy since the DERs follow their current reference in a current-controlled mode, making the load sharing faster, more reliable, and more accurate. A clear understanding of how the CPT decomposes load currents into its parts is presented, as well as the drawback found in droop strategy when dealing with load power sharing. Later, the SC load power-sharing strategy is described, indicating that the proposal of this paper makes an SC to have a broad option when managing a smart grid with dispatchable DERs. A case study with experimental results shows the efficacy of applying current decomposition of the CPT in load power-sharing strategies.

1 November 2012
Verified
Conference Paper
Closed access
RRRenan Diego de Oliveira Reiter
Renan Diego de Oliveira Reiter
LMLeandro Michels
Leandro Michels
JPJose Renes Pinheiro
Jose Renes Pinheiro
SOSergio Vidal Garcia Oliveira
Sergio Vidal Garcia Oliveira
APAdriano Péres
Adriano Péres
This paper presents a comparative analysis among different arrays of photovoltaic (PV) modules under partial shading conditions. This scenario is typical of a residential area where partial shading can occur due to trees or neighbor buildings. The main objective is to evaluate the power extraction under partial shading in parallel and series PV modules arrays, and compare the results. Simulation and experimental results are presented to validate the proposed analysis.

1 November 2017
Verified
Conference Paper
Closed access
GBGabriel L. Bressanini
Gabriel L. Bressanini
Tiago Davi Curi BusarelloTiago Davi Curi Busarello
Tiago Davi Curi Busarello
APAdriano Péres
Adriano Péres
In many electrical and electronic applications there is the need to have an efficient measurement over the State-of-Health (SoH) and the State-of-Charge (SoC). The SoH is an indirect measurement about the age of the battery while the SoC indicates the energy stored in the battery. The SoC and SoH are commonly referred in papers and scientific reports. However, their design and implementation procedure is very often left behind. Moreover, the implementation is not trivial. This paper presents the design and implementation of lead-acid battery SoH and SoC. The purpose is to present carefully the procedure showing how to design and implement the SoH and SoC estimators. The SoH estimation is based on obtaining the battery internal resistance. The SoC is based on the Coulomb Counting method, valid for charging and discharging processes. Experimental results using a 12V/2.3Ah battery show the efficacy of the proposed design and implementation method.

1 September 2019
Verified
Conference Paper
Closed access
Tiago Davi Curi BusarelloTiago Davi Curi Busarello
Tiago Davi Curi Busarello
Kamran ZebKamran Zeb
Kamran Zeb
APAdriano Péres
Adriano Péres
VOVenkata Subrahmanya Raghavendra Varaprasad Oruganti
Venkata Subrahmanya Raghavendra Varaprasad Oruganti
MSMarcelo Godoy Simões
Marcelo Godoy Simões
This paper presents a Digital Phase-Locked Loop (PLL) based on the Second Order Generalized Integrator (SOGI). The PLL structure, as well as the SOGI, are carefully described. The integrators of the SOGI are explained in detail in order to emphasize the elimination of an algebraic loop found in continuous time domain PLLs. The main contributions of this paper are to present the design of PLL entirely in z-domain and to present an easy, fast and accurate way to implement a digital PLL based on the SOGI structure. The digital SOGI PLL is implemented in the digital signal processor TMS320F28335. Experimental and simulation results show the efficacy of the digital SOGI PLL to keep synchronized with grid voltage at frequencies 50 and 60 Hz.

1 March 2010
Verified
Conference Paper
Closed access
FDFabricio Hoff Dupont
Fabricio Hoff Dupont
VMVinicius Foletto Montagner
Vinicius Foletto Montagner
JPJose Renes Pinheiro
Jose Renes Pinheiro
HPHumberto Pinheiro
Humberto Pinheiro
SOSergio Vidal Garcia Oliveira
Sergio Vidal Garcia Oliveira
APAdriano Péres
Adriano Péres
This paper presents a new methodology to design controllers for boost converters operating in a wide range of load variation. The proposed technique uses genetic algorithm to find local LQR controllers providing optimal performance in terms of overshoot and ITSE criteria. Fuzzy logic strategy is then used to combine these local controllers, yielding a strategy that guarantees good performance for a large set of load conditions. The proposed approach is compared with a conventional technique based on a single controller and with a strategy of switching controllers. Simulation results illustrate the superior performance of the converter with the proposed controller.