Ossama Badie Abouelatta

Prof. Dr. Ossama Badie Abouelatta

orcid

Research Focus & Metrics

Academic Career Length

22Years (2005-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 July 2020 in Bulletin of the Faculty of Engineering. Mansoura University
Verified
Journal Article
Open access
PDF file
WKWael Khalifa
Wael Khalifa
OAOssama Badie Abouelatta
Ossama Badie Abouelatta
EGElamir Gadelmawla
Elamir Gadelmawla
IEIbrahim Elewa
Ibrahim Elewa
Technological development accompanied the need to get a high-quality welding. The important industries such as oil and auto industries and other important industries need to rely on reliable welding operations; collapse as a result of this welding may mean a great loss in lives and money. This paper aimed to produce an automatic system to detect, recognize and classify welding cases (defects and no defects) in radiography images was described depending upon image histogram technique. Two main steps to do that, In the first step, image processing techniques, including converting color images to gray scale, filtering image, and resizing were implemented to help in the image array of weld images and the detection of weld defects. The second step, a proposed program was build in-house depending upon Matlab to classify and recognize automatically six types of weld defects met in practice, it is Porosity – Undercut – Lac of fusion – Crack – Slag –Cavity, plus the non-defect type. It was clear from the results that it can rely on this method significantly, reaching rates as well as the appointment of defects and no defects to about 94.3%.

28 February 2025 in IEEE Transactions on Automation Science and Engineering
Verified
Journal Article
Closed access
MOMohamed Omar
Mohamed Omar
WKWang Ke
Wang Ke
RLRuifeng Li
Ruifeng Li
DKDai Kun
Dai Kun
OAOssama Badie Abouelatta
Ossama Badie Abouelatta
MAMohamed Alkalla
Mohamed Alkalla
Recently, developed data-driven SINDy-based techniques can identify the dynamic model of serial robots without simplifying assumptions nor pre-knowledge of all kinematics and geometric details. However, these techniques cannot handle non-linear friction models, which significantly affects the precision of the dynamic model identification. This study proposes a novel data-driven approach for dynamic model identification considering the non-linear friction model along with SINDy concept. This approach is termed as non-linear-weighted-constrained SINDy (NL-WCS). The SINDy concept is extended to accommodate any non-linear friction model by efficiently incorporating the Levenberg-Marquardt (LM) algorithm. Weighted L1 regularization are combined with the physics and the data constraints, to promote sparsity in the recovery of the dynamic equations. Moreover, this combination makes the approach robust against the regression matrix’s ill-conditionality and noise. LM is integrated with the robot’s SIMULINK model to get initial values for the non-linear friction empirical parameters. NL-WCS is experimentally evaluated by utilizing three distinct trajectories to validate the extracted dynamic model of 6-DOF UR10 and 7-DOF KUKA robots. In addition, five non-linear friction models are compared. NL-WCS outperforms all the previous SINDy-data-driven methods since it reduced the RMSE significantly up to 60.65%. NL-WCS also demonstrated robustness when tested against different levels of noise.

15 October 2005 in Journal of Materials Processing Technology
Verified
Journal Article
Closed access
OAOssama Badie Abouelatta
Ossama Badie Abouelatta
AAA.A. Abdel-Samad
A.A. Abdel-Samad
ASAmal Sakrana
Amal Sakrana

15 March 2022 in International Journal of Engineering Research in Africa
Verified
Journal Article
Closed access
PDF file
AEAbdelkhalik Eladl
Abdelkhalik Eladl
OAOssama Badie Abouelatta
Ossama Badie Abouelatta
MSMagdy Samuel
Magdy Samuel
TETawakol A. Enab
Tawakol A. Enab
Recently, hydroforming was developed to address the emerging problems encountered by the conventional rigid tool-based deep drawing process. Hydroforming is a specialized type of die forming process, that uses a rigid die while the pressure provided by the liquid acts as a punch to shape the sheet metal. The current paper is directed to study the hydroforming process numerically and experimentally as a means for shaping aluminum alloy sheets based on the quality of product thickness variation and surface roughness. Moreover, it offered a comparative investigation of the experimental and numerical findings of this process. Therefore, thickness variation has been calculated numerically by designing a numerical model using Marc software which fits in large deformation simulation. On the other hand, thickness variation and surface roughness were measured experimentally along drawn cups and compared with the numerical results. The numerical results of thickness variation are matched with the experimental results. Furthermore, surface roughness was measured and compared before and after drawing at five regions. Since there is no contact between the upper side of a cup and any metallic parts, surface roughness depends only on the effect of plastic strain and was found to be increased in all regions.

1 January 2024 in Mansoura Engineering Journal
Verified
Journal Article
Open access
PDF file
MSMostafa Awadalla Sedeek
Mostafa Awadalla Sedeek
FEFatma Abdallah Elerian
Fatma Abdallah Elerian
OAOssama Badie Abouelatta
Ossama Badie Abouelatta
Mona AbouEleaz M. AbouEleazMona AbouEleaz M. AbouEleaz
Mona AbouEleaz M. AbouEleaz
The measurement uncertainty has a significant impact on quality control processes. This is particularly true of standards that are assessed to determine if a product is compliant. This ambiguity introduces two potential risks of decision-making: accepting a non-conventional product (the consumer's risk) or rejecting a conventional product (the producer's risk). This investigation explores the potential for false decisions caused by measurement errors in product assessments. By studying data near the control limits, a greater understanding of the manufacturing process is intended to facilitate informed decision-making, and guide the implementation of effective quality control methods. The investigation highlights the importance of selecting suitable measurement instruments to reduce false positive quality control decisions, which resulted in 11.43% of initially accurate parts violating the 0.1 mm tool. The 0.001 mm tool has a higher degree of precision than the 0.01 mm tool, but it may not always be practical financially

6 March 2022 in Mansoura Engineering Journal
Verified
Journal Article
Closed access
ASAbdel Monem Soleman
Abdel Monem Soleman
OAOssama Badie Abouelatta
Ossama Badie Abouelatta
AAAbdou Abbdel-Samad
Abdou Abbdel-Samad
HNHanan Abdel-Aziz Niazi
Hanan Abdel-Aziz Niazi
Chlorine levels and pH - receive much attention in the swimming world as they determine whether the pool water will be people - friendly that are safe, comfortable and enjoyable for swimmers or causing irritation and negative effects on the body. Restorative material samples were prepared for testing microhardness and surface roughness. A total of 160 specimens were prepared for this study. They were divided into two main groups ( Composite and compomer ) each group 80 specimens. Each group was divided into four subgroups according to pH of chlorinated water ( 7.5, 6.5, 5.5 and 4.5 ) ( Slightly alkaline, slightly acidic, medium and highly acidic ) each group 20 specimens. Each group was further classified into two classes according to the frequency of immersion ( Regular = 2hours/day and intensive = 4hours/day ). Each class was divided according to the testing procedure ( Microhardness or surface roughness ) into two equal subclasses. The subgroup placed in pH 7.5 was used as a control as recommended by many investigators. Microhardness and surface roughness of each specimen were tested before and one month after immersion in chlorinated water. From the results, it was found that there is a linear direct correlation between PH value and microhardness of the tested hybrid resin composite and compomer sample. A reverse linear correlation exists between PH values of chlorinated water and surface roughnssof hybrid composite and compomer; the lower the PH value the greater the surface roughness. The effect of PH of chlorinated water on surface roughness is more significant with hybrid composite than of compomer.