Hydrogen is expected to play an important role in the near future in the transition to a net-zero economy. Therefore, the development of new in situ and real-time analytical tools able to quantify hydrogen at high temperatures is required for future applications. Potentiometric sensors based on perovskite-structured solid-state electrolytes can be a good option for H2 monitoring. Nevertheless, the geometry of the sensor should be designed according to the specific necessities of each technological field. Conventional shaping processes need several iterations of green shaping and machining to achieve a good result. In contrast, 3D printing methods stand out from conventional ones since they simplify the creation of prototypes, reducing the cost and the number of iterations needed for the obtainment of the final design. In the present work, BaCe0.6Zr0.3Y0.1O3-α (BCZY) was used as a proton-conducting electrolyte for potentiometric sensors construction. Two different shapes were tested for the sensors’ electrolyte: pellets (BCZY-Pellet) and crucibles (BCZY-Crucible). Ceramics were shaped using extrusion-based 3D printing. Finally, parameters, such as sensitivity, response time, recovery time and the limit of detection and accuracy, were evaluated for both types of sensors (BCZY-Pellet and BCZY-Crucible) at 500 °C.
The synthesis atmosphere plays a fundamental role in determining the physicochemical properties and electrochemical performance of NMC811 cathode materials used in lithium-ion batteries. This study investigates the effect of carbonate impurities generated during synthesis by comparing three distinct samples: NMC811 calcined in ambient air, NMC811 calcined in synthetic air to mitigate carbonate formation, and NMC811 initially calcined in ambient air followed by annealing in synthetic air to eliminate carbonate species. Physicochemical characterization through XRD, SEM, FTIR, and TGA techniques revealed noticeable differences in the structural and chemical properties among the samples. Electrochemical assessments conducted via coin-cell testing demonstrate superior performance for materials synthesized in synthetic air, exhibiting an enhanced discharge capacity of 145.4 ± 4.8 mA h g−1 compared to materials synthesized in normal air (109.4 ± 4.3 mA h g−1) at C/10. More importantly, sample annealing in synthetic air after air calcination partially recovers the electrochemical performance of the cathode (142.1 ± 4.6 mA h g−1 at C/10) and this is related to the elimination of carbonate species from the ceramic powder. These findings highlight the importance of controlling synthesis conditions, particularly the atmosphere, to tailor the properties of NMC811 cathode materials for optimal lithium-ion battery performance.
Metals or alloys that are liquid at or near room temperature are of interest of the scientific community due to the versatility of their applications. Considering the nuclear fusion energy applications, Sn-Li alloys appear as a great candidate for plasma facing materials. However, plasma interactions can induce alterations on the lithium concentration and, as a consequence, modify the properties of the LM. Therefore, in order to prevent these situations, thermodynamic data such as activity coefficients and analytical devices capable of monitoring the lithium content in these alloys are of great interest. In this work, a lithium sensor based on the Li6BaLa2Ta2O12 solid-state electrolyte was used to determine lithium activity correlations for Sn-Li alloys at 400 and 500 °C. It was observed that the activity coefficient was constant for lithium concentrations lower than 8.5 at% with values, at the infinite dilution condition, of 8.4·10−5 at 400 °C and 2.7·10−4 at 500 °C, respectively. Above this concentration (from 8.5 to 16.5 at% Li), the activity coefficient varied with lithium concentration. In this case, correlations between lithium activity and the lithium atomic fraction were obtained.