Antonio Hinojo

Mr. Antonio Hinojo

Electrochemistry and Bioanalysis group (eqba), Institut Químic de Sarrià, Barcelona, Catalonia, Spain
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 December 2020 in Sensors
Verified
Journal Article
Open access
PDF file
AHAntonio Hinojo
Antonio Hinojo
ISIván Soriano
Iván Soriano
JAJordi Abella
Jordi Abella
SCSergi Colominas
Sergi Colominas
In many industrial fields, there is a need to design and characterize on-line and on-board hydrogen monitoring tools able to operate under extreme conditions. One of these applications is in future nuclear fusion reactors, which will use hydrogen isotopes as a plasma fuel. In this context, the measurement of the concentration of these hydrogen isotopes will be of interest to ensure the correct operating conditions for such reactors. Hydrogen sensors based on solid-state electrolytes will be the first step in the development of new analytical tools able to quantify deuterium and tritium in aggressive environments. In the present work, amperometric hydrogen sensors were constructed and evaluated using two solid-state electrolytes, BaCe0.6Zr0.3Y0.1O3-α and Sr(Ce0.9Zr0.1)0.95Yb0.05O3-α. Prototype sensors were built in order to study their sensitivity in on-line measurements. The experiments were performed in a reactor with a hydrogen-controlled environment. The sensors were evaluated at 500 and 600 °C in amperometric mode by applying 2 and 4 V voltages between electrodes. Both sensors showed increases in sensitivity when the temperature or voltage were increased.

11 December 2022 in Sensors
Verified
Journal Article
Open access
PDF file
AHAntonio Hinojo
Antonio Hinojo
ELEnric Lujan
Enric Lujan
MNMarc Nel-lo
Marc Nel-lo
JAJordi Abella
Jordi Abella
SCSergi Colominas
Sergi Colominas
Hydrogen is expected to play an important role in the near future in the transition to a net-zero economy. Therefore, the development of new in situ and real-time analytical tools able to quantify hydrogen at high temperatures is required for future applications. Potentiometric sensors based on perovskite-structured solid-state electrolytes can be a good option for H2 monitoring. Nevertheless, the geometry of the sensor should be designed according to the specific necessities of each technological field. Conventional shaping processes need several iterations of green shaping and machining to achieve a good result. In contrast, 3D printing methods stand out from conventional ones since they simplify the creation of prototypes, reducing the cost and the number of iterations needed for the obtainment of the final design. In the present work, BaCe0.6Zr0.3Y0.1O3-α (BCZY) was used as a proton-conducting electrolyte for potentiometric sensors construction. Two different shapes were tested for the sensors’ electrolyte: pellets (BCZY-Pellet) and crucibles (BCZY-Crucible). Ceramics were shaped using extrusion-based 3D printing. Finally, parameters, such as sensitivity, response time, recovery time and the limit of detection and accuracy, were evaluated for both types of sensors (BCZY-Pellet and BCZY-Crucible) at 500 °C.

16 February 2024 in International Journal of Hydrogen Energy
Verified
Journal Article
Closed access
ELEnric Lujan
Enric Lujan
AHAntonio Hinojo
Antonio Hinojo
SCSergi Colominas
Sergi Colominas
JAJordi Abella
Jordi Abella

24 April 2024 in Nuclear Materials and Energy
Verified
Journal Article
Open access
AHAntonio Hinojo
Antonio Hinojo
ELEnric Lujan
Enric Lujan
JAJordi Abella
Jordi Abella
SCSergi Colominas
Sergi Colominas

21 December 2022 in Chemosensors
Verified
Journal Article
Open access
PDF file
MNMarc Nel-lo
Marc Nel-lo
ELEnric Lujan
Enric Lujan
AHAntonio Hinojo
Antonio Hinojo
SCSergi Colominas
Sergi Colominas
JAJordi Abella
Jordi Abella
Metals or alloys that are liquid at or near room temperature are of interest of the scientific community due to the versatility of their applications. Considering the nuclear fusion energy applications, Sn-Li alloys appear as a great candidate for plasma facing materials. However, plasma interactions can induce alterations on the lithium concentration and, as a consequence, modify the properties of the LM. Therefore, in order to prevent these situations, thermodynamic data such as activity coefficients and analytical devices capable of monitoring the lithium content in these alloys are of great interest. In this work, a lithium sensor based on the Li6BaLa2Ta2O12 solid-state electrolyte was used to determine lithium activity correlations for Sn-Li alloys at 400 and 500 °C. It was observed that the activity coefficient was constant for lithium concentrations lower than 8.5 at% with values, at the infinite dilution condition, of 8.4·10−5 at 400 °C and 2.7·10−4 at 500 °C, respectively. Above this concentration (from 8.5 to 16.5 at% Li), the activity coefficient varied with lithium concentration. In this case, correlations between lithium activity and the lithium atomic fraction were obtained.

30 May 2021 in ECS Meeting Abstracts
Verified
Journal Article
Closed access
AHAntonio Hinojo
Antonio Hinojo
EPEnric Pallarès
Enric Pallarès
SCSergi Colominas
Sergi Colominas
JAJordi Abella
Jordi Abella
In future fusion reactors, tritium and deuterium will be used as a primary fuel. Currently, the most important research and development project about nuclear fusion energy is ITER (International Thermonuclear Experimental Reactor). To produce the fusion reaction, tritium will be generated inside the core using a breeding blanket. One of the suggested blankets is based on the use of molten lithium–lead eutectic alloy (Pb-15.7Li) [1]. This blanket will be flowing around the reactor core and while the fusion reaction occurs, energy is released and collected with an external heat exchanger system. Due to its short half-life (12.3 years), there are not natural tritium sources. Therefore, it must be obtained in situ and continuously in the breeding blanket. This hydrogen isotope can be produced by bombarding lithium with fast neutrons, which escape from the generated and confined plasma in the toroid-shaped vacuum chamber of a tokamak, to yield tritium and helium (6Li + n → 4He + 3H + 4.8MeV) [2]. Hence, dynamic tritium concentration measurement is of major interest for nuclear fusion reaction engineering and experimental proof of tritium self-sufficiency in liquid metal breeding systems. Consequently, it is necessary a measuring system that allows determining tritium concentration in high-temperature conditions. Electrochemical sensors based on solid-state proton conductor ceramics can be used for that purpose. These materials have attracted significant interest because of their chemical and physical durability, especially at elevated temperatures. These electrolytes are perovskite-type materials with electrical carriers, positive holes, excess electrons, oxide ion vacancies, and interstitial protons, which interact with oxide ions. Under this approach, new methods of synthesis are being studied in order to obtain ceramic materials of higher quality and purity able to offer better measurement signals. In the present work, the proton-conducting perovskite Sr(Ce0,9-Zr0,1)0,95Yb0,05O3-α was synthesized by two different methods. On one side, a conventional sol-gel method, using citric acid as a complexing agent, was employed [3]. On the other hand, the second method used was the glycine method, which is based on the combustion of glycine with the precursor's nitrates. Using the glycine method, it could be obtained a ceramic porous foam that improved the sintering process. Both synthesized materials were characterized using X-Ray Diffraction and SEM-EDS analysis. Finally, the obtained ceramic materials were properly sintered and shaped in order to construct electrochemical hydrogen sensors. Amperometric measurements were performed at 500°C and 600°C using different hydrogen concentrations and the response of the two sensors was compared. References [1] E. Mas de les Valls, L.A. Sedano, L. Batet, I. Ricapito, A. Aiello, O. Gastaldi, F. Gabriel, Lead-lithium eutectic material database for nuclear fusion technology, J. Nucl. Mater. 376 (2008) 353–357, https://doi.org/10.1016/j.jnucmat.2008.02.016 [2] H. Mei, Q. Wu, J. Chen, B. Zhang, Y. Liu, Equivalent determination of tritium production in liquid blanket of fusion reactor using lithium isotopic abundance analysis, Fusion Eng. Des. 112 (2016) 89–92, https://doi.org/10.1016/j.fusengdes.2016.07.015 [3] E. Juhera, S. Colominas, J. Abellà, Amperometric hydrogen sensors for application in fusion reactors, Fusion Eng. Des. 124 (2017) 901–904. https://doi.org/10.1016/j.fusengdes.2017.01.049