Paolo Coppa

Prof. Paolo Coppa

Industrial Engineering, University of Rome Tor Vergata, Rome, Lazio, Italy
orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 February 2019 in Materials
Verified
Journal Article
Open access
PDF file
Stefano BellucciStefano Bellucci
Stefano Bellucci
GBGianluigi Bovesecchi
Gianluigi Bovesecchi
Antonino CataldoAntonino Cataldo
Antonino Cataldo
Paolo CoppaPaolo Coppa
Paolo Coppa
Sandra CorasanitiSandra Corasaniti
Sandra Corasaniti
MPMichele Potenza
Michele Potenza
Thermal diffusivity of GNPs (graphene nano-platelets) is an important thermo-physical property as it is useful to predict the material behavior in many heat transfer applications. GNP samples were pressed at different loads to obtain different densities, and then thermal diffusivity was measured with the flash method. All samples were coated with a thin layer (~1 µm) of colloidal graphite (Aquadag®) on both sides to reduce reflectance of their surfaces and consequently increase the emissivity. Carrying out measurements on both samples with and without coating, a difference between the two series of measurements was found: This is attributed to a non-negligible transmittance of the uncoated samples due to the porosity of GNPs. Furthermore, assuming a spatial distribution of the light within the samples according to the Lambert-Bougert-Beer law, the extinction coefficient of GNP at different densities has been evaluated processing experimental data with a nonlinear least square regression, (NL-LSF, nonlinear least square fitting), whose model contains the extinction coefficient as unknown. The proposed method represents a further improvement of thermal diffusivity data processing, crucial to calculate the extinction coefficient when data with and without coating are available; or to correct biased thermal diffusivity data when the extinction coefficient is already known. Moreover, reflectance effects have been highlighted comparing asymptotic temperature reached during the tests on coated and uncoated samples at different densities. In fact, the decrease of asymptotic temperature of the uncoated samples gives the percentage of the light reflected and consequently an estimate of the reflectance of the GNP surface.

11 April 2021 in European Journal of Soil Science
Verified
Journal Article
Closed access
PDF file
VTVlodek R. Tarnawski
Vlodek R. Tarnawski
BWBernhard Wagner
Bernhard Wagner
WLWey H. Leong
Wey H. Leong
MMMarlon McCombie
Marlon McCombie
Paolo CoppaPaolo Coppa
Paolo Coppa
GBGianluigi Bovesecchi
Gianluigi Bovesecchi

22 November 2022 in Energies
Verified
Journal Article
Open access
PDF file
GDGiampaolo D'Alessandro
Giampaolo D'Alessandro
MPMichele Potenza
Michele Potenza
Sandra CorasanitiSandra Corasaniti
Sandra Corasaniti
Stefano SfarraStefano Sfarra
Stefano Sfarra
Paolo CoppaPaolo Coppa
Paolo Coppa
FMFilippo de Monte
Filippo de Monte
The present review describes the up-to-date state of the evaluation of thermophysical properties (TP) of materials with three different procedures: modeling (also including inverse problems), measurements and analytical methods (e.g., through computing from other properties). Methods to measure specific heat and thermal conductivity are described in detail. Thermal diffusivity and thermal effusivity are a combination of the previously cited properties, but also for these properties, specific measurement and calculation methods are reported. Experiments can be carried out in steady-state, transient, and pulse regimes. For modeling, special focus is given to the inverse methods and parameter estimation procedures, because through them it is possible to evaluate the thermophysical property, assuring the best practices and supplying the measurement uncertainty. It is also cited when the most common data processing algorithms are used, e.g., the Gauss–Newton and Levenberg–Marquardt least squares minimization algorithms, and how it is possible to retrieve values of TP from other data. Optimization criteria for designing the experiments are also mentioned.

24 July 2025 in Energies
Verified
Journal Article
Open access
PDF file
Sandra CorasanitiSandra Corasaniti
Sandra Corasaniti
Paolo CoppaPaolo Coppa
Paolo Coppa
DADario Atzori
Dario Atzori
ARAteeq Ur Rehman
Ateeq Ur Rehman
Renewable energy communities (RECs) are increasingly recognized as pivotal instruments in the global energy transition, offering decentralized, participatory, and sustainable solutions for energy management, specifically regarding energy production and consumption. The present review provides a comprehensive examination of the REC concept, tracing its regulatory evolution, particularly within the European Union through the renewable energy directives (RED II and RED III) and by analyzing its practical implementation across various countries. This paper explores the diverse technologies integrated into REC projects, such as photovoltaic systems, wind turbines, biogas, hydroelectric, and storage solutions, while also considering the socioeconomic frameworks, management models, and local engagement strategies that underpin their success. Key case studies from Europe, Asia, Africa, and Australia illustrate the various approaches, challenges, and outcomes of REC initiatives in different geographic and policy contexts. The analysis also highlights barriers to implementing RECs, including regulatory uncertainty and market integration issues, and identifies the best practices and policies that support REC scalability. By synthesizing current trends and lessons learned, this review aims to inform policymakers, researchers, and practitioners about the transformative role of RECs in achieving decarbonization goals and accomplishing resilient energy systems.

12 August 2023 in Energies
Verified
Journal Article
Open access
PDF file
GBGianluigi Bovesecchi
Gianluigi Bovesecchi
Paolo CoppaPaolo Coppa
Paolo Coppa
Sandra CorasanitiSandra Corasaniti
Sandra Corasaniti
Girolamo CostanzaGirolamo Costanza
Girolamo Costanza
MPMichele Potenza
Michele Potenza
Maria Elisa TataMaria Elisa Tata
Maria Elisa Tata
This experimental work presents the results of measurements of thermal conductivity λ and convection heat transfer coefficient h on regular structure PLA and aluminium foams with low density ratio (~0.15), carried out with a TCP (thermal conductivity probe), built by the authors’ laboratory. Measurements were performed with two fluids, water and air: pure fluids, and samples with the PLA and aluminium foams immersed in both fluids have been tested. Four temperatures (10, 20, 30, 40 °C) and various temperature differences during the tests ΔT (between 0.35 and 9 °C) were applied. Also, tests in water mixed with 0.5% of a gel (agar agar) have been run in order to increase the water viscosity and to avoid convection starting. For these tests, at the end of the heating, the temperature of the probe reaches steady-state values, when all the thermal power supplied by the probe is transferred to the cooled cell wall; thermal conductivity was also evaluated through the guarded hot ring (GHR) method. A difference was found between the results of λ in steady-state and transient regimes, likely due to the difference of the sample volume interested by heating during the tests. Also, the effect of the temperature difference ΔT on the behaviour of the pure fluid and foams was outlined. The mutual effect of thermal conductivity and free convection heat transfer results in being extremely important to describe the behaviour of such kinds of composites when they are used to increase or to reduce the heat transfer, as heat conductors or insulators. Very few works are present in the literature about this subject, above all, ones regarding low-density regular structures.

21 January 2026 in Energies
Verified
Journal Article
Open access
PDF file
ARAteeq Ur Rehman
Ateeq Ur Rehman
DADario Atzori
Dario Atzori
Sandra CorasanitiSandra Corasaniti
Sandra Corasaniti
Paolo CoppaPaolo Coppa
Paolo Coppa
The shift towards the integration of and transition to renewable energy has led to an increase in renewable energy communities (RECs) and smart grids (SGs). The significance of these RECs is mainly energy self-sufficiency, energy independence, and energy autonomy. Despite this, in low- and middle-income countries and regions like Pakistan and the Middle East, SGs and RECs are still in their initial stage. However, they have potential for green energy solutions rooted in their unique geographic and climatic conditions. SGs offer energy monitoring, communication infrastructure, and automation features to help these communities build flexible and efficient energy systems. This work provides an overview of Pakistani and Middle Eastern energy policies, goals, and initiatives while aligning with European comparisons. This work also highlights technical, regulatory, and economic challenges in those regions. The main objectives of the research are to ensure that residential service sizes are optimized to maximize the economic and environmental benefits of green energy. Furthermore, in line with SDG 7, affordable and clean energy, the focus in this study is on the development and transformation of energy systems for sustainability and creating synergies with other SDGs. The paper presents insights on the European Directive, including the amended Renewable Energy Directive (RED II and III), to recommend policy enhancements and regulatory changes that could strengthen the growth of RECs in Asian countries, Pakistan, and the Middle East, paving the way for a more inclusive and sustainable energy future. Additionally, it addresses the main causes that hinder the expansion of RECs and SGs, and offers strategic recommendations to support their development in order to reduce dependency on national electric grids. To perform this, a perspective study of Pakistan’s indicative generation capacity by 2031, along with comparisons of energy capacity in the EU, the Middle East, and Asia, is presented. Pakistan’s solar, wind, and hydro potential is also explored in detail. This study is a baseline and informative resource for policy makers, researchers, industry stakeholders, and energy communities’ promoters, who are committed to the task of promoting sustainable renewable energy solutions.