The electrical double-layer supercapacitance performance of the nanoporous carbons prepared from the Phyllanthus emblica (Amala) seed by chemical activation using the potassium hydroxide (KOH) activator is reported. KOH activation was carried out at different temperatures (700–1000 °C) under nitrogen gas atmosphere, and in a three-electrode cell set-up the electrochemical measurements were performed in an aqueous 1 M sulfuric acid (H2SO4) solution. Because of the hierarchical pore structures with well-defined micro- and mesopores, Phyllanthus emblica seed-derived carbon materials exhibit high specific surface areas in the range of 1360 to 1946 m2 g−1, and the total pore volumes range from 0.664 to 1.328 cm3 g−1. The sample with the best surface area performed admirably as the supercapacitor electrode-material, achieving a high specific capacitance of 272 F g−1 at 1 A g−1. Furthermore, it sustained 60% capacitance at a high current density of 50 A g−1, followed by a remarkably long cycle-life of 98% after 10,000 subsequent charging/discharging cycles, demonstrating the electrode’s excellent rate-capability. These results show that the Phyllanthus emblica seed would have significant possibilities as a sustainable carbon-source for the preparing high-surface-area activated-carbons desired in high-energy-storage supercapacitors.
High-surface-area porous carbon materials with high porosity and well-defined pore structures are the preferred advanced supercapacitors electrode materials. Here, we report the electrochemical supercapacitive performance of novel high-porosity activated carbon materials prepared from biowaste Terminalia chebula (Harro) seed stones involving zinc chloride (ZnCl2) activation. Activation is achieved by mixing ZnCl2 with Harro seed powder (1:1 w/w) followed by carbonization at 400–700 °C under a nitrogen gas atmosphere. The amorphous carbon materials obtained exhibit excellent performance as electrical double-layer capacitor electrodes in aqueous electrolyte (1 M sulfuric acid) due to high specific surface areas (as high as 1382.6 m2 g−1) based on well-developed micropore and mesopore structures, and partial graphitic structure containing oxygenated surface functional groups. An electrode prepared using material having the optimal surface textural properties achieved a large specific capacitance of 328.6 F g−1 at 1 A g−1 in a three-electrode cell setup. The electrode achieved a good capacitance retention of 44.7% at a high 50 A g−1 current density and outstanding cycling performance of 98.2% even following 10,000 successive charge/discharge cycles. Electrochemical data indicate the significant potential of Terminalia chebula seed-derived porous carbons as high-performance electrode materials for high-energy-storage supercapacitor applications.
Porous activated carbon materials derived from biomass could be the suitable materials for high-rate performance electrochemical supercapacitors as it exhibits high surface area due to well-defined pore structure. Here, we report the novel porous activated carbon from Triphala seed stones by chemical activation with zinc chloride at different carbonization temperature (400-700 °C) under the nitrogen gas atmosphere. The activated carbon was characterized by Fourier transform-infrared (FTIR) spectroscopy, Raman scattering and scanning electron microscopy (SEM). Nitrogen adsorption-desorption measurements was used to study the surface properties (effective surface areas, pore volumes and pore size distributions). The electrochemical measurements were performed in an aqueous 1 M sulphuric acid (H2SO4) solution in a three-electrode cell set up. Triphala seed stones-derived porous carbon materials with well-defined micro- and mesopores exhibit high specific surface area ranges from 878.7 to 1233.3 m2 g-1 and total pore volume ranges from 0.439 to 0.626 cm3 g-1. The specific capacitance obtained by electrochemical measurement experiment was 208.7 F g-1 at 1 A g-1. These results indicate that the prepared nanoporous activated carbon material from Triphala seed stones would have significant possibility as supercapacitor electrode material for high-energy-storage supercapacitor applications.
This study reports the synthesis of an activated nanoporous carbon material from Phyllanthus emblica (Amala)—a biomass material which is an eco-friendly, economical, and sustainable precursor used to prepare activated carbon using zinc chloride (ZnCl2) activation at various temperatures (500–700 °C) under a nitrogen gas atmosphere. A sample that was carbonized at 700 °C (AmC_Z700) attained a high specific surface area of 1436 m2 g−1 and a total pore volume of 0.962 cm3 g−1, and, when used in an electrode, showed excellent supercapacitance performance, attaining a high specific capacitance of 263 F g−1 at a current density of 1 A g−1, followed by 55% capacitance retention at 50 A g−1. Additionally, the assembled symmetric supercapacitor cell, when operated at 1.2 V, delivered an energy density of 8.9 Wh kg−1 at a power density of 300 W kg−1 and exhibited an excellent cycle life of 95% after 10,000 successive charge/discharge cycles, demonstrating the substantial potential of Phyllanthus emblica seed-derived carbon materials for the creation of high-performance supercapacitors.
Phosphoric acid can be used to activate different precursors and produce activated carbon (AC), a porous material with high adsorption capacity and surface area. This research shows how AC is made using different locally available precursors, namely amla seeds and harro seeds. We compare how the carbonization temperature and the precursor type affect the surface area, pore structure, and electrochemical properties of the AC. We use different methods to analyze the AC samples, such as scanning electron microscopy, surface area, methylene blue number, iodine number, and cyclic voltammetry. We show that the best conditions for making AC depend on the type of precursor and the activation temperature.