Nowadays, the electronic nose (e-nose) has gained a huge amount of attention due to its ability to detect and differentiate mixtures of various gases and odors using a limited number of sensors. Its applications in the environmental fields include analysis of the parameters for environmental control, process control, and confirming the efficiency of the odor-control systems. The e-nose has been developed by mimicking the olfactory system of mammals. This paper investigates e-noses and their sensors for the detection of environmental contaminants. Among different types of gas chemical sensors, metal oxide semiconductor sensors (MOXs) can be used for the detection of volatile compounds in air at ppm and sub-ppm levels. In this regard, the advantages and disadvantages of MOX sensors and the solutions to solve the problems arising upon these sensors’ applications are addressed, and the research works in the field of environmental contamination monitoring are overviewed. These studies have revealed the suitability of e-noses for most of the reported applications, especially when the tools were specifically developed for that application, e.g., in the facilities of water and wastewater management systems. As a general rule, the literature review discusses the aspects related to various applications as well as the development of effective solutions. However, the main limitation in the expansion of the use of e-noses as an environmental monitoring tool is their complexity and lack of specific standards, which can be corrected through appropriate data processing methods applications.

The work represents a successful attempt to combine a gas sensors array with instrumentation (hardware), and machine learning methods as the basis for creating numerical codes (software), together constituting an electronic nose, to correct the classification of the various stages of the wastewater treatment process. To evaluate the multidimensional measurement derived from the gas sensors array, dimensionality reduction was performed using the t-SNE method, which (unlike the commonly used PCA method) preserves the local structure of the data by minimizing the Kullback-Leibler divergence between the two distributions with respect to the location of points on the map. The k-median method was used to evaluate the discretization potential of the collected multidimensional data. It showed that observations from different stages of the wastewater treatment process have varying chemical fingerprints. In the final stage of data analysis, a supervised machine learning method, in the form of a random forest, was used to classify observations based on the measurements from the sensors array. The quality of the resulting model was assessed based on several measures commonly used in classification tasks. All the measures used confirmed that the classification model perfectly assigned classes to the observations from the test set, which also confirmed the absence of model overfitting.

The storage and disposal of sewage sludge from municipal wastewater treatment plants is becoming an increasing problem on a global scale. The attention of scientists is directed to the search for unique technologies to manage them. Firing sewage sludge in furnaces and producing lightweight...

Currently, e-noses are used for measuring odorous compounds at wastewater treatment plants. These devices mimic the mammalian olfactory sense, comprising an array of multiple non-specific gas sensors. An array of sensors creates a unique set of signals called a “gas fingerprint”, which enables it to differentiate between the analyzed samples of gas mixtures. However, appropriate advanced analyses of multidimensional data need to be conducted for this purpose. The failures of the wastewater treatment process are directly connected to the odor nuisance of bioreactors and are reflected in the level of pollution indicators. Thus, it can be assumed that using the appropriately selected methods of data analysis from a gas sensors array, it will be possible to distinguish and classify the operating states of bioreactors (i.e., phases of normal operation), as well as the occurrence of malfunction. This work focuses on developing a complete protocol for analyzing and interpreting multidimensional data from a gas sensor array measuring the properties of the air headspace in a bioreactor. These methods include dimensionality reduction and visualization in two-dimensional space using the principal component analysis (PCA) method, application of data clustering using an unsupervised method by Density-Based Spatial Clustering of Applications with Noise (DBSCAN) algorithm, and at the last stage, application of extra trees as a supervised machine learning method to achieve the best possible accuracy and precision in data classification.

Paper is in the scope of moisture-related problems which are connected with mold threat in buildings, sick building syndrome (SBS) as well as application of electronic nose for evaluation of different building envelopes and building materials. The machine learning methods used to analyze multidimensional signals are important components of the e-nose system. These multidimensional signals are derived from a gas sensor array, which, together with instrumentation, constitute the hardware of this system. The accuracy of the classification and the correctness of the classification of mold threat in buildings largely depend on the appropriate selection of the data analysis methods used. This paper proposes a method of data analysis using Principal Component Analysis, metric multidimensional scaling and Kohonen self-organizing map, which are unsupervised machine learning methods, to visualize and reduce the dimensionality of the data. For the final classification of observations and the identification of datasets from gas sensor arrays analyzing air from buildings threatened by mold, as well as from other reference materials, supervised learning methods such as hierarchical cluster analysis, MLP neural network and the random forest method were used.

Introduction and objective: The article analyzes the content of heavy metals and standard physical as well as chemical pollution indicators in different types of sediments from stormwater, combined sewer and sanitary sewer systems. Material and methods: Nickel, lead, chromium, copper, zinc...