To ensure that a liquid tank semi-trailer has good yaw stability and path-following performance on low-adhesion roads under turning conditions, a multi-object PID differential braking-control method is proposed, which takes the tractor yaw rate, semi-trailer yaw rate, and articulation angle as the control parameters. According to the principle of equivalence, the trammel pendulum (TP) model is used to simulate the liquid sloshing effect in the liquid tank, and the Fluent software is used to identify the key parameters of the trammel pendulum model and verify the correctness of its simulation effect. Then, a co-simulation model is built based on TruckSim and MATLAB/Simulink. Based on the simplified six degrees of freedom model and the co-simulation model of a liquid tank semi-trailer, a multi-object PID differential braking-control method is designed, and the vehicle state responses with and without control are compared when it is turning on a low-adhesion road. The simulation results show that the proposed multi-object PID differential braking-control method can effectively improve the yaw stability and path-following performance of the liquid tank semi-trailer when turning on a low-adhesion road.
Laser processing platform for micro crystal resonator (MCR) frequency modulation is an important piece of equipment to apply laser etching technology to the MCR frequency modulation process. The positioning accuracy of the laser processing platform has an important influence on frequency modulation characteristics. In order to improve the precision and efficiency of the laser processing platform for MCR frequency modulation, the error model of the laser processing platform for MCR frequency modulation is established based on the multi-body system theory. According to the Monte Carlo simulation method, the influence of laser processing platform error for MCR on frequency modulation characteristics is analyzed. Considering the requirements of the MCR frequency modulation process, the laser processing platform for MCR frequency modulation is built, and the frequency deviation and frequency modulation performance are verified to meet the engineering requirements.