Muhammad Hassan Razzaq

Mr. Muhammad Hassan Razzaq

orcid

Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 March 2026 in Progress in Biomedical Engineering
Verified
Journal Article
Open access
MZMuhammad Usama Zaheer
Muhammad Usama Zaheer
MRMuhammad Hassan Razzaq
Muhammad Hassan Razzaq
Emerson CoyEmerson Coy
Emerson Coy
MAMehmet Fatih Aycan
Mehmet Fatih Aycan
Yogendra MishraYogendra Mishra
Yogendra Mishra
The longevity and performance of biomedical implants depend strongly on surface properties, motivating coatings that enhance biocompatibility, mechanical resilience, and resistance to wear and infection. This review analyzes state-of-the-art coatings for orthopedic and dental implants, linking material choice, deposition method, and demonstrated in vitro performance. Bioinert systems (e.g. TiN, diamond-like carbon), bioactive coatings such as hydroxyapatite and bioactive glass, and antibacterial approaches using silver-, zinc-oxide-, and graphene-based layers are compared for their effects on osseointegration, bacterial control, and durability. Deposition routes from plasma spraying to advanced methods including pulsed laser deposition, atomic layer deposition (ALD), and plasma-enhanced chemical vapor deposition are evaluated for adhesion, microstructure control, and clinical practicality. Across recent studies, nanostructured and multifunctional coatings consistently accelerate early osteogenic responses, ion- or carbon-modified hydroxyapatite improves interfacial bonding while adding antibacterial activity, conformal ultrathin films from ALD enhance corrosion resistance on complex geometries without impairing cell viability, and multilayer or hybrid architectures reduce tribocorrosion under cyclic loading. Remaining challenges include maintaining long-term stability and uniform coverage on intricate implant designs and scaling fabrication economically. Emerging directions focus on stimuli-responsive surfaces and biodegradable, drug-eluting coatings aimed at reducing infection risk and speeding integration, with the overall trajectory pointing toward coatings that couple mechanical reliability with targeted biological function.

Verified
Journal Article
Open access
PDF file
MRMuhammad Hassan Razzaq
Muhammad Hassan Razzaq
OAOlugbenga Ayeni
Olugbenga Ayeni
SKSelin Köklü
Selin Köklü
KBKagan Berk
Kagan Berk
MZMuhammad Usama Zaheer
Muhammad Usama Zaheer
Sen SinanSen Sinan
Sen Sinan
This study investigates the potential of Selective Laser Melting (SLM) to tailor the surface characteristics of Ti6Al4V directly during fabrication, eliminating the need for post-processing treatments potentially for dental implants. By adjusting the Volumetric Energy Density (VED) through controlled variations in the laser scanning speed, we achieved customized surface textures at both the micro- and nanoscale levels. SLM samples fabricated at moderate VED levels (50–100 W·mm3/s) exhibited optimized dual-scale surface roughness—a macro-roughness of up to 25.5–27.6 µm and micro-roughness of as low as 58.8–64.2 nm—resulting in significantly enhanced hydrophilicity, with water contact angles (WCAs) decreasing to ~62°, compared to ~80° on a standard grade 5 machined Ti6Al4V plate. The XPS analysis revealed that the surface oxygen content remains relatively stable at low VED values, with no significant increase. The surface topography plays a significant role in influencing the WCA, particularly when the VED values are low (below 200 W·mm3/s) during SLM, indicating the dominant effect of surface morphology over chemistry in these conditions. Biological assays using osteoblast-like MG-63 cells demonstrated that these as-built SLM surfaces supported a 1.5-fold-higher proliferation and improved cytoskeletal organization relative to the control, confirming the enhanced early cellular responses. These results highlight the capability of SLM to engineer bioactive implant surfaces through process-controlled morphology and chemistry, presenting a promising strategy for the next generation of dental implants suitable for immediate placement and osseointegration.

30 June 2026 in Journal of Materials Research
Verified
Journal Article
Open access
MUMuhammad Haseem Umer
Muhammad Haseem Umer
MKMuhammad Bilal Khan
Muhammad Bilal Khan
MZMuhammad Qasim Zafar
Muhammad Qasim Zafar
GHGhulam Hussain
Ghulam Hussain
MRMuhammad Hassan Razzaq
Muhammad Hassan Razzaq

21 August 2026 in Small
Verified
Journal Article
Open access
PDF file
MZMuhammad Usama Zaheer
Muhammad Usama Zaheer
Vahid JahedVahid Jahed
Vahid Jahed
RRRajveer Singh Rajaura
Rajveer Singh Rajaura
FAFatemeh Rastegar Adib
Fatemeh Rastegar Adib
MRMuhammad Hassan Razzaq
Muhammad Hassan Razzaq
Yogendra MishraYogendra Mishra
Yogendra Mishra
Additive manufacturing of Ti–6Al–4V implants enables patient‐specific design, but process‐induced surface and microstructural variations can strongly affect biological performance. In this work, Ti64 samples with varying volumetric energy densities (VEDs) were fabricated by selective laser melting to examine the combined effects of processing and surface modification on cell response and antibacterial behavior. The specimens were surface activated by controlled acid etching and coated with hydroxyapatite/reduced graphene oxide (HAp/rGO) composite via electrophoretic deposition. Surface morphology, chemistry, and porosity were assessed using Scanning Electron Microscopy, X‐ray Photoelectron Spectroscopy, profilometry, micro‐CT. Micro‐CT showed higher internal porosity at lower VED, while a balance between densification and structural integrity was achieved at VED of 107 J mm − 3 . In vitro cytocompatibility demonstrated >90% viability for all samples, meeting ISO 10993‐5 requirements. Despite this, cell attachment depends on VED, the E63 condition exhibited the most uniform coverage after HAp/rGO coating, indicating an improved surface–cell interactions at lower VED. Antibacterial assays showed VED dependence; high‐VED‐E320 samples produced the highest biofilm formation even after coating, whereas low and intermediate VED conditions significantly reduced bacterial adhesion. Overall, biological functionality is observed to be governed by both coating and SLM parameters, with 107 J·mm − 3 offering the best combined structural, cytocompatible, and antibacterial performance.