Mehmet Fatih Aycan

Dr. Mehmet Fatih Aycan

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 September 2025 in Advanced Healthcare Materials
Verified
Journal Article
Open access
MZMuhammad Usama Zaheer
Muhammad Usama Zaheer
MRMuhammad Hassan Razzaq
Muhammad Hassan Razzaq
MAMehmet Fatih Aycan
Mehmet Fatih Aycan
Yogendra MishraYogendra Mishra
Yogendra Mishra
This study presents a comprehensive framework combining Selective Laser Melting (SLM) of Titanium (Ti64) alloys, finite element simulation, and artificial intelligence (AI) to advance orthopedic implants' design and predictive evaluation. Dense Ti64 specimens are fabricated using ten distinct SLM parameter sets to explore the effects of volumetric energy density (VED) on mechanical behavior, porosity distribution, and microstructural integrity. Optimal VED ranges are identified to balance defect minimization and mechanical performance, with porosity levels strongly influencing tensile strength and Young's modulus. These material properties are then integrated into a mechanobiological bone healing model to simulate fracture repair in tibial mid‐diaphyseal regions under intramedullary fixation. A mechano‐regulation algorithm incorporating deviatoric strain, fluid velocity, and pore pressure guided tissue differentiation and callus evolution over a 4‐month healing period. Variations in implant stiffness—achievable via solid and lattice Ti64 configurations demonstrate distinct influences on endochondral ossification, external callus growth, and overall biomechanical recovery. AI‐based regression models are trained on simulation outcomes to accelerate evaluation and enable patient‐specific predictions to forecast healing trajectories without repeated finite element analyses. This AI‐driven framework facilitates real‐time prediction of healing outcomes based on implant design, supporting the development of adaptive and optimized orthopedic implants for clinical translation.

3 January 2021 in Arabian Journal for Science and Engineering
Verified
Journal Article
Closed access
PDF file
ABArif BALCI
Arif BALCI
FKFurkan Küçükaltun
Furkan Küçükaltun
MAMehmet Fatih Aycan
Mehmet Fatih Aycan
YUYusuf Usta
Yusuf Usta
TDTeyfik Demir
Teyfik Demir

26 March 2026 in Progress in Biomedical Engineering
Verified
Journal Article
Open access
MZMuhammad Usama Zaheer
Muhammad Usama Zaheer
MRMuhammad Hassan Razzaq
Muhammad Hassan Razzaq
Emerson CoyEmerson Coy
Emerson Coy
MAMehmet Fatih Aycan
Mehmet Fatih Aycan
Yogendra MishraYogendra Mishra
Yogendra Mishra
The longevity and performance of biomedical implants depend strongly on surface properties, motivating coatings that enhance biocompatibility, mechanical resilience, and resistance to wear and infection. This review analyzes state-of-the-art coatings for orthopedic and dental implants, linking material choice, deposition method, and demonstrated in vitro performance. Bioinert systems (e.g. TiN, diamond-like carbon), bioactive coatings such as hydroxyapatite and bioactive glass, and antibacterial approaches using silver-, zinc-oxide-, and graphene-based layers are compared for their effects on osseointegration, bacterial control, and durability. Deposition routes from plasma spraying to advanced methods including pulsed laser deposition, atomic layer deposition (ALD), and plasma-enhanced chemical vapor deposition are evaluated for adhesion, microstructure control, and clinical practicality. Across recent studies, nanostructured and multifunctional coatings consistently accelerate early osteogenic responses, ion- or carbon-modified hydroxyapatite improves interfacial bonding while adding antibacterial activity, conformal ultrathin films from ALD enhance corrosion resistance on complex geometries without impairing cell viability, and multilayer or hybrid architectures reduce tribocorrosion under cyclic loading. Remaining challenges include maintaining long-term stability and uniform coverage on intricate implant designs and scaling fabrication economically. Emerging directions focus on stimuli-responsive surfaces and biodegradable, drug-eluting coatings aimed at reducing infection risk and speeding integration, with the overall trajectory pointing toward coatings that couple mechanical reliability with targeted biological function.

1 September 2021 in Journal of Polytechnic
Verified
Journal Article
Closed access
PDF file
ABArif BALCI
Arif BALCI
MAMehmet Fatih Aycan
Mehmet Fatih Aycan
YUYusuf Usta
Yusuf Usta
TDTeyfik Demi̇r
Teyfik Demi̇r
Üretildiği malzemenin dayanım, biyolojik ve yorulma gibi özelliklerini kullanım alanına uygun olarak şartlandırabilen gözenekli yapılara ortopedi alanında özellikle onarıcı biyomedikal ürün üretimi için gereksinim duyulmaya başlanmıştır. Dolu malzemelerin kemik ile dayanım farkının fazla olması sonucu ortaya çıkan gerilme kalkanı etkisi biyomedikal ürün kaybına sebep olmaktadır. Eklemeli imalat yöntemlerinin sağladığı avantaj sayesinde gözenekli malzemeler koşullara uygun olarak tasarlanabilmekte veya doğal yapıya sahip geometrilerin kopyalanması ile üretim yapılabilmektedir. Literatürün genelinde yer alan tasarlanabilir birim hücre geometrilerinin üretilebilirliği ve dayanımı hakkındaki çalışmaların aksine yapılan çalışmada koyuna ait femur ve vertebra bölgelerinden alınan trabeküler kemiklerin Mikro-CT ile kopyalanması sonucu elde edilen geometriler Ti6Al4V ELI alaşımından seçimli lazer ergitme (SLE) metodu ile üretilmiştir. Yapılan üretimlerin basma ve basma-kayma dayanımları incelenmiştir. Destek yapılar kullanılmadan yapılan üretim sonrası karşılaşılabilecek üretim değişimleri göz önünde bulundurularak trabeküler yapının üretiminde 1:1, 1:1,10 ve 1:1,20 ölçekli geometriler kullanılmıştır. Yapılan basma testleri sonucunda elastisite modül femur numunelerinde ortalama 3±0,25 GPa ve vertebra numunelerinde 2±0,15 GPa olarak elde edilmiş olup analizlerin deney sonuçları ile uyumluluğunun yüksek olduğu görülmüştür. Çalışma kapsamında üretilen trabeküler metal yapının biyomedikal ürünlerde kullanılması durumunda sahip olduğu düşük elastisite modül değerleriyle gerilme kalkanı etkisini azaltacağı ve doğal kemik geometrisi avantajı ile kemiğin içe doğru büyüme davranışını destekleyeceği sonucuna varılmıştır.

15 December 2020 in International Advanced Researches and Engineering Journal
Verified
Journal Article
Open access
PDF file
MAMehmet Fatih Aycan
Mehmet Fatih Aycan
TDTeyfik Demi̇r
Teyfik Demi̇r
Screw loosening in spine surgery is a clinical complication in patients with poor bone quality. Pedicle screws are subjected to bending moments and axial loads that may cause toggling during daily movements of spine. The purpose of this study was to assess the previous studies related to toggling effect on pullout performance of pedicle screws by surveying the whole literature and to provide some discussion for new studies about pullout performance of pedicle screws after toggling. The search was performed by combining terms of pedicle screw, toggling, screw loosening, fatigue, cyclic loading, and pullout. The retrieved articles dealing with determined terms and also their references were reviewed. Some of these articles were eliminated after review process. Toggling was determined to be crucial for the stabilization performance of pedicle screw because the loosening mechanism of screws was affected directly by cyclic loading. The toggling or cyclic loading affected the holding capacity of pedicle screws negatively, and the possibility of loosening or failure problem for pedicle screws increased with cyclic loading magnitude. Loading conditions, screw properties, test medium, level of spinal region, and cement usage were determined by many researchers as the most important parameters affecting the toggling performance as well as the pullout strength of pedicle screws. The pullout strength of pedicle screws generally decreased with cyclic loading. The parameters of cyclic loading were fairly important for pullout performance of pedicle screws. Screw properties and cement augmentation had critical effects on the stability of screws under cyclic loading, as well.

Verified
Journal Article
Open access
PDF file
MRMuhammad Hassan Razzaq
Muhammad Hassan Razzaq
OAOlugbenga Ayeni
Olugbenga Ayeni
SKSelin Köklü
Selin Köklü
KBKagan Berk
Kagan Berk
MZMuhammad Usama Zaheer
Muhammad Usama Zaheer
Sen SinanSen Sinan
Sen Sinan
This study investigates the potential of Selective Laser Melting (SLM) to tailor the surface characteristics of Ti6Al4V directly during fabrication, eliminating the need for post-processing treatments potentially for dental implants. By adjusting the Volumetric Energy Density (VED) through controlled variations in the laser scanning speed, we achieved customized surface textures at both the micro- and nanoscale levels. SLM samples fabricated at moderate VED levels (50–100 W·mm3/s) exhibited optimized dual-scale surface roughness—a macro-roughness of up to 25.5–27.6 µm and micro-roughness of as low as 58.8–64.2 nm—resulting in significantly enhanced hydrophilicity, with water contact angles (WCAs) decreasing to ~62°, compared to ~80° on a standard grade 5 machined Ti6Al4V plate. The XPS analysis revealed that the surface oxygen content remains relatively stable at low VED values, with no significant increase. The surface topography plays a significant role in influencing the WCA, particularly when the VED values are low (below 200 W·mm3/s) during SLM, indicating the dominant effect of surface morphology over chemistry in these conditions. Biological assays using osteoblast-like MG-63 cells demonstrated that these as-built SLM surfaces supported a 1.5-fold-higher proliferation and improved cytoskeletal organization relative to the control, confirming the enhanced early cellular responses. These results highlight the capability of SLM to engineer bioactive implant surfaces through process-controlled morphology and chemistry, presenting a promising strategy for the next generation of dental implants suitable for immediate placement and osseointegration.