Tiltrotor aircrafts have both fixed-wing control surfaces and helicopter rotors for attitude control. The redundancy of control surfaces provides the possibility for the control system to reconfigure the control law when actuator faults occur during flight. Possible actuator faults have been classified into two categories: predictable and unpredictable faults, and a different strategy has been adopted to deal with each kind of fault. Firstly, the predictable faults are handled by a multiple-model switching adaptive scheme. These kinds of faults are modeled, and their corresponding controllers are derived offline. Secondly, since the degree of drop in aerodynamic effectiveness cannot be predicted a priori, unpredictable faults are handled by a simple adaptive control scheme, to force the plant with faults to track the prescribed reference model. The presented methodology has been verified by nonlinear full-envelope flight simulation for both categories of actuator faults. The predictable fault is represented by the elevator floating. Elevator damage causing an aerodynamic effectiveness drop by 80% is chosen as the example of unpredictable fault. Both faults are simulated at the late stage of the tiltrotor conversion mode. Results show that the presented strategy of reconfiguration is able to detect the fault rapidly and stabilize the aircraft when a fault occurs, while the aircraft motion diverges without the reconfiguration scheme. The aircraft also presents a relatively good performance under controller reconfiguration with a well-tracked conversion path.
In this paper, the autonomous landing of the parafoil used for aerial vehicles is investigated through the numerical approach. The coupled parafoil-vehicle dynamics model is developed based on the multibody method. The transition process from aircraft flight to parafoil glide is designed in a global system framework. To deal with large flexible deformations during the deployment process, the parafoil canopy is approximated as interacting symmetric subparts using the geometric division method. The pseudo-spectral method is employed to generate a reference trajectory for the landing target. As the system dynamics are introduced into constraint conditions, the generated trajectory is beneficial to improve landing precision. In addition, other optimization objectives, including minimal energy consumption and obstacle avoidance, are considered in trajectory planning. The enhanced proportional integral control is designed to follow the reference trajectory. The neural network inversion model is used to reduce the coupling effect between the longitudinal and the directional control channels. There is a coupling effect that the two controls both are implemented through left and right trailing-edge deflections. An adaptive output allocation method is proposed to ensure that the directional control always is effective in particular when one side reaches saturation. Finally, simulations for autonomous landing under different conditions are carried out to validate the integrated system.
This work presents a systematic approach to analyzing the aerodynamic characteristics of tandem rotor forward autorotation considering rotor-to-rotor interference. The single-rotor computational model trimmed from a generic helicopter flight dynamics analysis program was used as the baseline model. The effectiveness of the baseline model is demonstrated by a comparison with data from wind tunnel tests performed in this work. The rotor disk angle of attack and driven moment distribution obtained by the modified model indicate the fact that the rotor acceleration is primarily caused by the higher angle of attack region of the disk. This is of great significance in the rotor blade design, in terms of the drag-to-lift ratio characteristics of the airfoil under different angle-of-attack ranges. The influence of wind speed, rotor shaft angle, and collective pitch on the steady-state rotor speed was then studied. The results show a nonlinear nature of the variation of steady rotor speed with collective pitch, which can cause a thrust control reverse problem during flight operations. To reveal the flow field details of rotor-to-rotor interference, the flow field Navier–Stokes equations of tandem rotor autorotation were solved. Computational results of both rotors’ inflow velocities were considered when deriving the empirical model of interference. The refined interference model was compared to the wind tunnel test data of the tandem rotor autorotation and showed good performance. This synthetical methodology, which combines mechanism analysis with CFD-aided refinement and experiment verification, achieves a balance between computational costs and accuracy and thus can be readily applied to engineering practices.
The traditional parafoil system localization methods rely highly on GNSS. However, GNSS cannot provide the control system real-time, high-bandwidth parafoil pose. Additionally, GNSS signals could be attenuated or rejected in complex environments such as mountains or canyons. In order to improve the localization precision of the parafoil system considering GNSS-challenged environments, a multistate constraint Kalman filter-based Vision/IMU/GNSS integration algorithm is explored. In contrast to traditional integration methods defining motion state in a single Cartesian coordinate, our approach jointly defines and constructs the motion state based on multiple coordinates, offering the control system the required high-bandwidth pose input directly. Furthermore, the covariance matrix transformation method is introduced to realize the smooth transition of error state between different coordinates, providing a novel solution for absolute and relative measurement fusion problems. Airsim-based simulation and real-world experiments are carried out to validate the performance of the designed integration algorithm. Experiment results indicate that the proposed algorithm can effectively integrate visual and GNSS measurements, addressing the continuous accurate and effective localization requirement for precise control of autonomous guided parafoil systems in GNSS-challenged environments.
Neural networks have been widely used as compensational models for aircraft control designs and as surrogate models for other optimizations. In the case of tiltrotor aircraft, the total number of aircraft states and controls is much greater than that of both traditional fixed-wings and helicopters. This requires, in general, a huge amount of training data for the network to reach a satisfactory approximation precision and makes the network size rise considerably. To solve the practical problem of reducing the size of the approximating network, efforts have to be made in the efficient utilization of the limited amount of training data. This work presents the methodology of optimizing the sample pattern of the training data set by adopting the metaheuristic algorithm of the particle swarm optimizer improved by the fourth-order Runge–Kutta algorithm. A 6-degree-of-freedom nonlinear flight dynamics model of the tiltrotor aircraft is derived, along with its approximation radial basis function neural network. An example case of approximating a highly nonlinear function is studied to illustrate the principle and main parameters of the optimizer, and the approximation performance of the time-domain response of the unstable nonlinear system is revealed by the study of a Van der Pol oscillator. Then, the presented method is applied to the modeled tiltrotor aircraft for its early and late conversion modes. The optimization scheme shows great improvement in both cases, as the function approximation error is reduced significantly.
The parafoil is highly susceptible to deviations from its reference trajectory under wind disturbances. Given its constrained longitudinal control authority, it has limited capability to correct these deviations and regain the intended glide path. To overcome this limitation, we propose a dynamic planning framework based on a layered homing strategy. The airdrop mission trajectory is initially designed as a traditional multi-segment path. To approximate non-uniform glide characteristics under wind disturbances, this planning problem incorporates a predicted wind model as an external input. Node parameters of the segmented trajectory are then solved using an improved grey wolf optimizer (IGWO). By tracking this reference trajectory, the parafoil is guided into the proximity of the target. To ensure landing precision, the terminal phase is formulated and discretized using an adaptive pseudo-spectral method (APSM). The online planner computes a real-time trajectory to account for actual motion characteristics. This dynamic replanning (DRP) compensates for deviations caused by model mismatches and external disturbances. The proposed homing method is statistically verified via extensive Monte Carlo simulations under different wind conditions. Finally, the airdrop experiment is conducted to validate the DRP method.