In this paper, the autonomous landing of the parafoil used for aerial vehicles is investigated through the numerical approach. The coupled parafoil-vehicle dynamics model is developed based on the multibody method. The transition process from aircraft flight to parafoil glide is designed in a global system framework. To deal with large flexible deformations during the deployment process, the parafoil canopy is approximated as interacting symmetric subparts using the geometric division method. The pseudo-spectral method is employed to generate a reference trajectory for the landing target. As the system dynamics are introduced into constraint conditions, the generated trajectory is beneficial to improve landing precision. In addition, other optimization objectives, including minimal energy consumption and obstacle avoidance, are considered in trajectory planning. The enhanced proportional integral control is designed to follow the reference trajectory. The neural network inversion model is used to reduce the coupling effect between the longitudinal and the directional control channels. There is a coupling effect that the two controls both are implemented through left and right trailing-edge deflections. An adaptive output allocation method is proposed to ensure that the directional control always is effective in particular when one side reaches saturation. Finally, simulations for autonomous landing under different conditions are carried out to validate the integrated system.
The traditional parafoil system localization methods rely highly on GNSS. However, GNSS cannot provide the control system real-time, high-bandwidth parafoil pose. Additionally, GNSS signals could be attenuated or rejected in complex environments such as mountains or canyons. In order to improve the localization precision of the parafoil system considering GNSS-challenged environments, a multistate constraint Kalman filter-based Vision/IMU/GNSS integration algorithm is explored. In contrast to traditional integration methods defining motion state in a single Cartesian coordinate, our approach jointly defines and constructs the motion state based on multiple coordinates, offering the control system the required high-bandwidth pose input directly. Furthermore, the covariance matrix transformation method is introduced to realize the smooth transition of error state between different coordinates, providing a novel solution for absolute and relative measurement fusion problems. Airsim-based simulation and real-world experiments are carried out to validate the performance of the designed integration algorithm. Experiment results indicate that the proposed algorithm can effectively integrate visual and GNSS measurements, addressing the continuous accurate and effective localization requirement for precise control of autonomous guided parafoil systems in GNSS-challenged environments.
The parafoil is highly susceptible to deviations from its reference trajectory under wind disturbances. Given its constrained longitudinal control authority, it has limited capability to correct these deviations and regain the intended glide path. To overcome this limitation, we propose a dynamic planning framework based on a layered homing strategy. The airdrop mission trajectory is initially designed as a traditional multi-segment path. To approximate non-uniform glide characteristics under wind disturbances, this planning problem incorporates a predicted wind model as an external input. Node parameters of the segmented trajectory are then solved using an improved grey wolf optimizer (IGWO). By tracking this reference trajectory, the parafoil is guided into the proximity of the target. To ensure landing precision, the terminal phase is formulated and discretized using an adaptive pseudo-spectral method (APSM). The online planner computes a real-time trajectory to account for actual motion characteristics. This dynamic replanning (DRP) compensates for deviations caused by model mismatches and external disturbances. The proposed homing method is statistically verified via extensive Monte Carlo simulations under different wind conditions. Finally, the airdrop experiment is conducted to validate the DRP method.
8 September 2025 in Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
A mathematical model of the helicopter carrying an external slung load is built based on the multiple-mass-point hypothesis. The equilibrium states along variable configurations are sought through numerical optimization, while the eigenvalue distribution reveals the open-loop stability characteristics. To alleviate the degradation of flight control efficiency caused by load oscillations, a movable hook beneath the fuselage is introduced to provide auxiliary inputs for the underactuated system and stabilize the load motion. A hierarchic control is designed utilizing the state feedback-based nonlinear dynamic inversion (NDI) incorporated with the augmentation device. Considering that the acting point of the sling force on the helicopter is variable and the deviation from the original model appears, the inversion system for each control loop is constructed and combined with the sliding mode control (SMC) to compensate for inversion model errors. Simulation results indicate that the load pendulum motions are rapidly suppressed during forward and circular flights under automatic control. Meanwhile, the helicopter maintains high-fidelity command tracking. Furthermore, the system robustness is validated through the simulations in external disturbances.