There is currently exponential growth in the electric vehicle market, which will require an increase in the electrical grid capacity to meet the associated charging demand. If, on the one hand, the introduction of energy generation from renewable energy sources can be used to meet that requirement, the intermittent nature of some of these sources will challenge the mandatory real-time equilibrium between generation and consumption. In order to use most of the energy generated via these sources, mechanisms are required to manage the charging of batteries in electric vehicles, according to the levels of generation. An effective smart charging process requires communication and/or control mechanisms between the supply equipment and the electric vehicle, enabling the adjustment of the energy transfer according to the generation levels. At this level, the ISO 15118 standard supports high-level communication mechanisms, far beyond the basic control solutions offered through the IEC 61851-1 specification. It is, thus, relevant to evaluate it in smart charging scenarios. In this context, this paper presents the development of a charge emulation system using the ISO 15118 communication protocol, and it discusses its application for demand response purposes. The system comprises several modules developed at both ends, supply equipment and electric vehicles, and allows the exchange of data during an emulated charging process. The system also includes human interfaces to facilitate interactions with users at both ends. Tests performed using the implemented system have shown that it supports a demand response when integrated with a photovoltaic renewable energy source. The dynamic adjustment to charging parameters, based on real-time energy availability, ensures efficient and sustainable charging processes, reducing the reliance on the grid and promoting the use of renewable energy.

Buildings are responsible for a high percentage of global energy consumption, and thus, the improvement of their efficiency can positively impact not only the costs to the companies they house, but also at a global level. One way to reduce that impact is to constantly monitor the consumption levels of these buildings and to quickly act when unjustified levels are detected. Currently, a variety of sensor networks can be deployed to constantly monitor many variables associated with these buildings, including distinct types of meters, air temperature, solar radiation, etc. However, as consumption is highly dependent on occupancy and environmental variables, the identification of anomalous consumption levels is a challenging task. This study focuses on the implementation of an intelligent system, capable of performing the early detection of anomalous sequences of values in consumption time series applied to distinct hotel unit meters. The development of the system was performed in several steps, which resulted in the implementation of several modules. An initial (i) Exploratory Data Analysis (EDA) phase was made to analyze the data, including the consumption datasets of electricity, water, and gas, obtained over several years. The results of the EDA were used to implement a (ii) data correction module, capable of dealing with the transmission losses and erroneous values identified during the EDA’s phase. Then, a (iii) comparative study was performed between a machine learning (ML) algorithm and a deep learning (DL) one, respectively, the isolation forest (IF) and a variational autoencoder (VAE). The study was made, taking into consideration a (iv) proposed performance metric for anomaly detection algorithms in unsupervised time series, also considering computational requirements and adaptability to different types of data. (v) The results show that the IF algorithm is a better solution for the presented problem, since it is easily adaptable to different sources of data, to different combinations of features, and has lower computational complexity. This allows its deployment without major computational requirements, high knowledge, and data history, whilst also being less prone to problems with missing data. As a global outcome, an architecture of a platform is proposed that encompasses the mentioned modules. The platform represents a running system, performing continuous detection and quickly alerting hotel managers about possible anomalous consumption levels, allowing them to take more timely measures to investigate and solve the associated causes.

The Joint Video Team, composed by the ISO/IEC Moving Picture Experts Group (MPEG) and the ITU-T Video Coding Experts Group (VCEG), has standardized a scalable extension of the H.264/AVC video coding standard called scalable video coding (SVC). H.264/SVC provides scalable video streams which are composed by a base layer and one or more enhancement layers. Enhancement layers may improve the temporal, the spatial or the signal-to-noise ratio resolutions of the content represented by the lower layers. One of the applications of this standard is related to video transmission in both wired and wireless communication systems, and it is therefore important to analyze in which way packet losses contribute to the degradation of quality, and which mechanisms could be used to improve that quality. This paper provides an analysis and evaluation of H.264/SVC in error prone environments, quantifying the degradation caused by packet losses in the decoded video. It also proposes and analyzes the consequences of QoS-based discarding of packets through different marking solutions.