The objective of this study was to investigate the roles and tribological mechanisms of onion-like carbon nanoparticles derived from biodiesel soot (BDS) when applied in water (H2O) and liquid paraffin (LP). In this study, we prepared nitric acid-treated BDS (NA-BDS) as an additive to H2O and NA-BDS modified with oleylamine (NA-BDS-OLA) as an additive to LP. Raman spectroscopy, field-emission transmission electron microscopy, Fourier transform infrared spectroscopy, and zeta potentiometry were used to characterize the results of the nitric acid treatment and oleylamine modification. The tribological behaviors and corresponding mechanisms of the new onion-like carbon nanoparticles were evaluated using a ball-on-disc reciprocating tribometer, as well as field-emission scanning electron microscopy, three-dimensional laser scanning microscopy, and Raman spectroscopy. The results indicated that the additives NA-BDS and NA-BDS-OLA, which were onion-like carbon nanoparticles with sizes ranging from 35 to 40 nm, enhanced the antiwear and friction reduction properties of H2O and LP, respectively. Through tribo-mechanisms, these types of soot can serve as spacers and ball bearings between the rubbing surfaces. Moreover, exfoliation under a high load as a result of the formation of a graphitic layer facilitates easy shearing.
20 June 2023 in Journal of Industrial and Engineering Chemistry
The tribological performance of graphene oxide (GO) nanosheets, modified biodiesel soot (MBS) nanoparticles, and their mixture (MBS–GO) nanoparticles as lubricant additives in water was evaluated using a reciprocating ball-on-plate tribometer. The effects of different mass ratios of GO to MBS, additive concentrations, and loads, as well as corresponding lubrication mechanisms, were studied. The tribological measurements showed that the water-containing 0.5 wt% additives at a mass ratio of 60:40 (GO to MBS) resulted in larger reductions in friction coefficient (69.7%) and wear volume (60.5%) than water. Owing to the synergistic effect of GO nanosheets and MBS nanoparticles, the MBS–GO aqueous sample showed superior lubricating properties compared to water as well as GO and MBS aqueous samples. The good tribological properties of MBS–GO nanoparticles in water are attributed to the formation of a tribofilm of hybrid nanoparticles that effectively protects the friction interface. Moreover, the MBS nanoparticles can provide lubrication by acting as ball bearings.
The service life of artificial joints has gradually failed to meet the needs of patients. Herein, the synergistic lubrication and antioxidant efficacies of graphene oxide (GO) and fullerenol (Fol) as biological lubricant additives for artificial joints were investigated. The lubrication mechanisms of biological lubricant containing GO and Fol at the friction interface of artificial joints were then revealed. Tribological tests showed that the average friction coefficients of Al2O3–Ti6Al4V pairs and Ti6Al4V–UHMWPE pairs for artificial joints could be reduced by 30% and 22%, respectively, when GO and Fol were used as biological lubricant additives simultaneously. The lubrication mechanism showed that some incommensurate sliding contact surfaces could be formed between the GO nanosheets and spherical Fol at the interface, which reduced the interaction forces of friction pairs. The maximum scavenging rates of •OH and DPPH free radicals by the biological lubricant containing GO and Fol were 35% and 45%, respectively, showing a good antioxidant efficacy of the biological lubricant. This can be attributed to the GO and Fol scavenging free radicals through electron transfer and hydrogen transfer. This study provides a theoretical basis for the development and application of carbon nanomaterials as biological lubricant additives for artificial joints in the future.
7 April 2020 in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
The biodiesel soot interacts with engine oil and causes the wear of engine parts. In this study, we present the effects of rGO@Fe3O4 on the tribological behavior of the biodiesel soot-contaminated lubricating oil using a UMT-2 multifunction friction tester to ensure active control with respect to the role of biodiesel soot in engine oil. Three-dimensional laser scanning microscopy, field-emission scanning electron microscopy, and Raman spectroscopy were used to analyze the worn surfaces of the lower disc. rGO@Fe3O4 reduced the wear of the GCr15 steel specimens as an additive in the polyalphaolefin-6 base oil containing biodiesel soot. The tribological mechanism can be attributed to the formation of a protecting layer in the presence of rGO@Fe3O4 and the ability of the exfoliated Fe3O4 particles to repair the friction surfaces, enhancing the anti-wear property of polyalphaolefin-6 containing biodiesel soot.
This study primarily focuses on the development and optimization of a high-efficiency catalyst for biodiesel production. Potassium carbonate-supported solid catalysts were synthesized using soot as the support material via an equal-volume impregnation method. Transmission electron microscopy (TEM) and X-ray diffraction (XRD) analyses confirmed the successful deposition of potassium carbonate onto the soot surface, resulting in uniformly dispersed spherical nanoparticles on the catalyst. The catalytic performance was evaluated through single-factor experiments, assessing the effects of catalyst loading, alcohol-to-oil molar ratio, reaction temperature, and reaction time on the transesterification reaction. The maximum biodiesel yield obtained from the Single-factor experiments was 95.29% under the optimal conditions of 6 wt% catalyst loading (relative to oil), alcohol-to-oil molar ratio of 14:1, reaction temperature of 60 °C, and reaction time of 3 h. Furthermore, response surface methodology (RSM) using a four-factor, three-level Box–Behnken design (BBD) was employed to systematically analyze the interaction effects of these variables on the biodiesel yield. The optimized conditions identified by RSM were 61.1 °C, 3.3 h, alcohol-to-oil molar ratio of 14.2:1, and 6.1 wt% catalyst dosage, yielding 95.37% biodiesel conversion. These findings demonstrate that the soot-supported potassium carbonate catalyst developed in this study exhibits excellent catalytic activity, offering a novel catalyst system for industrial biodiesel production with significant academic and practical potential.