The objective of this study was to investigate the roles and tribological mechanisms of onion-like carbon nanoparticles derived from biodiesel soot (BDS) when applied in water (H2O) and liquid paraffin (LP). In this study, we prepared nitric acid-treated BDS (NA-BDS) as an additive to H2O and NA-BDS modified with oleylamine (NA-BDS-OLA) as an additive to LP. Raman spectroscopy, field-emission transmission electron microscopy, Fourier transform infrared spectroscopy, and zeta potentiometry were used to characterize the results of the nitric acid treatment and oleylamine modification. The tribological behaviors and corresponding mechanisms of the new onion-like carbon nanoparticles were evaluated using a ball-on-disc reciprocating tribometer, as well as field-emission scanning electron microscopy, three-dimensional laser scanning microscopy, and Raman spectroscopy. The results indicated that the additives NA-BDS and NA-BDS-OLA, which were onion-like carbon nanoparticles with sizes ranging from 35 to 40 nm, enhanced the antiwear and friction reduction properties of H2O and LP, respectively. Through tribo-mechanisms, these types of soot can serve as spacers and ball bearings between the rubbing surfaces. Moreover, exfoliation under a high load as a result of the formation of a graphitic layer facilitates easy shearing.
25 October 2017 in Journal of Materials Science: Materials in Electronics
Here, a novel copper p-aminophenol metal–organic framework (Cu(PAP)2) is first reported. Powder X-ray diffraction (PXRD), infrared spectra (FTIR), Raman spectra, transmission electron microscopy (TEM) and X-ray photoemission spectroscopy (XPS), in combination with a structure simulation, indicated that Cu(PAP)2 is a two-dimensional (2D) material with a staggered structure analogous to that of graphite. Based on its 2D graphite-like layer structure, Cu(PAP)2 was expected to exhibit preferable tribological behaviors as an additive in liquid lubricants, and the tribological properties of Cu(PAP)2 as a lubricating additive in hydrogenated polydecene (PAO6) or deionized water were investigated. Compared to PAO6 or deionized water, the results indicated that deionized water-based Cu(PAP)2 showed much better friction reduction and anti-wear behavior than PAO6-based Cu(PAP)2 did, which was due to Cu(PAP)2 penetrating the interface between friction pairs in deionized water, but not in PAO6, thus producing lower friction and wear resistance values.