According to the new generation geometrical product specification, it is necessary to provide measurement uncertainty together with measurement results in order to determine the reliability of results. The traditional methods used for the uncertainty evaluation of straightness are laborious and time-consuming owing to a large quantity of repeated measurements or a complicated computational process. Based on the error ellipse theory and the Monte Carlo method, a novel method for uncertainty evaluation is proposed. Through the error ellipse theory, in the measuring space of coordinate measuring machines, the positional uncertainty of sampling points can be more accurately considered to be represented by an ellipse. By integrating the Monte Carlo method, only with limited sets of real measured data in small experimental trials, the uncertainty propagation from a single sampling point to the whole straight line can be demonstrated clearly in the simulation without requiring large amounts of time and labour. The detailed procedures of uncertainty evaluation are given. The straightness uncertainty can then be obtained by statistical analysis of the simulation results. Real straightness measurement experiments were carried out and compared with the results from the proposed method. The difference was no more than 5%, which verified the validity of the method.
8 January 2021 in Journal of Manufacturing Science and Engineering
Modeling the variation propagation based on the stream of variation (SoV) methodology for multistage machining processes (MMPs) has been investigated intensively in the past two decades; however, little research is conducted on the variation reduction and the existing work fails to be applied to irregular features caused by the machining-induced variation varying with the positions of the contour points on the machined surface. This paper proposes a novel error compensation method for MMPs by modifying the tool path to reduce variation for general features. The method based on differential motion vector (DMV) sets of multiple contour points is presented to represent the deviation of the irregular feature. Then, the conventional stream of variation (SoV) model is further extended to more accurately describe variation propagation for irregular features considering the actual datum-induced variations and the varying machining-induced variations, especially the deformation errors for the low stiffness workpiece. Based on the extended SoV model and error equivalence mechanism, the datum error and fixture error are transformed to the equivalent tool path error. Then, the original tool path is modified through shifting the machine zero points of machine tools with no need for changing the original G code and workpiece setup. A real cutting experiment validates the effectiveness of the proposed error compensation method for MMPs with an average precision improvement of over 60%. The application of the extended SoV model significantly contributes to compensating more complex error sources for MMPs, such as the clamp force, the internal residual stress, etc.
15 July 2025 in IEEE Transactions on Instrumentation and Measurement
he precision of the cradle-type rotary axis in a 5-axis machine tool significantly impacts the accuracy of workpieces, such as thin-walled surfaces in the aerospace industry.he precision of the cradle-type rotary axis in a 5-axis machine tool significantly impacts the accuracy of workpieces, such as thin-walled surfaces in the aerospace industry.T However, the axis line of the cradle is virtual, making its geometric errors difficult to measure and identify efficiently. In this paper, the geometric error identification and compensation method for cradle-type rotary axis in 5-axis machine tool using multilateration measurement is proposed. The high-precision length data from the tracking interferometer is used for the iterative self-calibration, and the sampling point’s position and system parameters are obtained. The sampling points’ position errors are first attributed to the cradle’s position-independent geometric errors (PIGEs), and then the position-dependent geometric errors (PDGEs). The cradle’s geometric errors are considered in the 5-axis machine tool, and the error compensation values of each axis are calculated through inverse kinematics. The proposed method only takes 1 hour to identify all geometric errors, making the measurement more convenient. Experiment results show that the identified cradle’s geometric errors are similar to the commercial identification software TRAC-CAL, with an angular positioning error deviation of 6.9 μrad. The cradle’s motion accuracy has significantly improved with error compensation. In particular, the cradle’s angular positioning error is reduced by 84%, indicating the effectiveness of the proposed method. An extended application in a rotary table is given, and its angular positioning error is reduced by 67%. The proposed method provides a reference for the study of efficient geometric error identification and are applicable to different conditions.