According to the new generation geometrical product specification, it is necessary to provide measurement uncertainty together with measurement results in order to determine the reliability of results. The traditional methods used for the uncertainty evaluation of straightness are laborious and time-consuming owing to a large quantity of repeated measurements or a complicated computational process. Based on the error ellipse theory and the Monte Carlo method, a novel method for uncertainty evaluation is proposed. Through the error ellipse theory, in the measuring space of coordinate measuring machines, the positional uncertainty of sampling points can be more accurately considered to be represented by an ellipse. By integrating the Monte Carlo method, only with limited sets of real measured data in small experimental trials, the uncertainty propagation from a single sampling point to the whole straight line can be demonstrated clearly in the simulation without requiring large amounts of time and labour. The detailed procedures of uncertainty evaluation are given. The straightness uncertainty can then be obtained by statistical analysis of the simulation results. Real straightness measurement experiments were carried out and compared with the results from the proposed method. The difference was no more than 5%, which verified the validity of the method.
8 January 2021 in Journal of Manufacturing Science and Engineering
Modeling the variation propagation based on the stream of variation (SoV) methodology for multistage machining processes (MMPs) has been investigated intensively in the past two decades; however, little research is conducted on the variation reduction and the existing work fails to be applied to irregular features caused by the machining-induced variation varying with the positions of the contour points on the machined surface. This paper proposes a novel error compensation method for MMPs by modifying the tool path to reduce variation for general features. The method based on differential motion vector (DMV) sets of multiple contour points is presented to represent the deviation of the irregular feature. Then, the conventional stream of variation (SoV) model is further extended to more accurately describe variation propagation for irregular features considering the actual datum-induced variations and the varying machining-induced variations, especially the deformation errors for the low stiffness workpiece. Based on the extended SoV model and error equivalence mechanism, the datum error and fixture error are transformed to the equivalent tool path error. Then, the original tool path is modified through shifting the machine zero points of machine tools with no need for changing the original G code and workpiece setup. A real cutting experiment validates the effectiveness of the proposed error compensation method for MMPs with an average precision improvement of over 60%. The application of the extended SoV model significantly contributes to compensating more complex error sources for MMPs, such as the clamp force, the internal residual stress, etc.