In Italy, use and production of asbestos and asbestos-containing materials (ACMs) were banned in 1992, however, the risk of exposure to asbestos still exists, because most ACMs are located in industrial and public buildings. A total of 111 Italian buildings with friable and non-friable ACMs were surveyed; 500 air samples were collected in the areas where contamination might have occurred. Airborne asbestos fiber concentration calculated from air samples was averaged for each building. Statistical analysis of the data showed no significant differences between the mean concentration measured in buildings with friable and non-friable ACMs (p = 0.258). The concentration values were below 2 f/L, the value stated by Italian regulation to ensure that the area is safe to reoccupy after asbestos removal. Samples of settled dust were also collected. The presence of asbestos fibers in the dust showed the occurrence of a release of asbestos from the material. Although the airborne asbestos fiber concentrations measured were low, current Italian regulation requires an asbestos management program. The Public Institution to which the authors of this work belong encourages asbestos removal as the preferred abatement method, in line with the asbestos-free future approach proposed by the European Commission.

Airborne particulate matter (PM) poses a major health risk, yet species selection for vertical greening systems (VGS) is poorly quantified. We evaluated PM retention by seven commercially available shade-tolerant species grown in a modular living wall system (LWS) on a north-facing façade at Sapienza University of Rome. After 3 months of in situ exposure, leaves were analyzed via SEM (1000×), collecting 210 images, 30 per species. An automated FIJI/ImageJ pipeline segmented particles, computed equivalent circular diameters, and classified them into (PM < 0.5, PM [0.5, 1), PM [1, 2.5), PM [2.5, 10), and PM ≥ 10 µm). Across species, ultrafine and fine fractions dominated deposits, with the 10 µm). Heuchera sanguinea consistently displayed the lowest densities across all size classes. Performance patterns aligned with leaf surface traits: wax-coated, moderately rough or gently structured cuticles favored adhesion, whereas highly irregular microrelief did not consistently enhance retention. Methodological considerations include thresholding sensitivity, use of equivalent circular diameter for irregular particles, and an upper area filter that may undercount large aggregates. The findings identify Vinca minor cv. albomarginata and Fatsia japonica as priority species for PM mitigation in shaded VGS, with Hedera helix complementing coarse PM capture. The results provide trait-based, design-oriented guidance for living wall species selection in Mediterranean urban and indoor contexts.