This study explores the potential of graphene oxide (GO) as an additive in waterborne polyurethane (WPU) resins to create eco-friendly coatings with enhanced anticorrosive properties. Traditionally, WPU’s hydrophilic nature has limited its use in corrosion-resistant coatings. We investigate the impact of incorporating various GO concentrations (0.01, 0.1, and 1.3 wt%) and functionalizing GO with ethylenediamine (EDA) on the development of anticorrosive coatings for carbon steel. It was observed, by potentiodynamic polarization analysis in a 3.5% NaCl solution, that the low GO content in the WPU matrix significantly improved anticorrosion properties, with the 0.01 wt% GO-EDA formulation showing exceptional performance, high Ecorr (−117.82 mV), low icorr (3.70 × 10−9 A cm−2), and an inhibition corrosion efficiency (η) of 99.60%. Raman imaging mappings revealed that excessive GO content led to agglomeration, creating pathways for corrosive species. In UV/condensation tests, the 0.01 wt% GO-EDA coating exhibited the most promising results, with minimal corrosion products compared to pristine WPU. The large lateral dimensions of GO sheets and the cross-linking facilitated by EDA enhanced the interfacial properties and dispersion within the WPU matrix, resulting in superior barrier properties and anticorrosion performance. This advancement underscores the potential of GO-based coatings for environmentally friendly corrosion protection.
28 February 2024 in Journal of Applied Polymer Science
Corrosive surgical instruments are routinely observed in central sterile services departments around the world. In addition to other risks, they can harbor microorganisms in the form of biofilms. Thus, this study aimed to evaluate whether biofilms intentionally formed at corrosion points on surgical instruments are removable by manual and automated cleaning followed by sterilization. Laboratory experiments were performed where samples of corroded surgical instruments in use in practice were evaluated for biofilm presence using a scanning electron microscope. No biofilms were observed in the samples subjected to manual and automated cleaning, nor in the samples in which there was no intentional biofilm formation. Residual organic matter without the presence of microorganisms was observed.
Polymeric nanocomposites have attracted significant interest for their low density, processability, and multifunctional properties, making them suitable for applications such as flexible electronics, sensors, biomedical devices, and functional coatings. In this work, thermoplastic polyurethane (TPU) nanocomposites reinforced with thermally reduced graphene oxide (TrGO) functionalized with nickel (Ni) and cobalt (Co) nanoparticles were developed via melt blending in a twin‐screw extruder and systematically characterized. Structural analyses using Raman spectroscopy, X‐ray diffraction (XRD), and scanning electron microscopy (SEM) confirmed successful TrGO functionalization and the formation of ordered lamellar structures. Thermogravimetric analysis (TGA) indicated that incorporating the nanofillers did not significantly affect the thermal stability or phase‐transition behavior of TPU. Dynamic mechanical analysis (DMA) revealed increased stiffness below the glass transition temperature, demonstrating effective reinforcement of the polymer matrix. Tensile testing showed substantial improvements in mechanical performance, with increases of up to 145% in tensile strength and 146% in elongation at break compared with neat TPU. Rheological measurements indicated higher viscosity and enhanced pseudoplastic behavior, suggesting strong polymer‐filler interactions. Magnetic characterization revealed weak ferromagnetic contributions in the Ni‐ and Co‐functionalized systems. These results demonstrate that metal‐functionalized TrGO is an effective multifunctional filler for TPU, providing significant mechanical reinforcement while maintaining thermal stability, with potential applications in flexible electronics, smart coatings, and advanced polymeric devices.