Keonhee Park

Mr. Keonhee Park

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 December 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
KPKeonhee Park
Keonhee Park
SLSeung Won Lee
Seung Won Lee
HKHae-Jong Kim
Hae-Jong Kim
JLJang-Seob Lim
Jang-Seob Lim
Various statistical distributions, such as Weibull, log-normal, and exponential functions, are frequently employed to interpret the dielectric breakdown (BD) strength data of insulating materials, including cross-linked polyethylene, low-density polyethylene, polypropylene (PP), and polyethylene. This study aimed to determine a suitable statistical distribution for analyzing the dielectric BD strength data of PP insulators before and after thermal degradation. Dielectric BD strength tests were conducted on thermally deteriorated PP insulators under various degradation conditions. Additionally, a coefficient of determination was employed to assess the compatibility between the dielectric BD strength data and the statistical distribution of PP insulators before and after thermal degradation. The test results indicate that the coefficient of determination for alternating current BD strength data was 0.955 in the log-normal distribution before degradation and 0.929 in the Weibull distribution after degradation. Consequently, in the analysis of the PP insulation breakdown data, the log-normal distribution was found to be suitable for data before degradation, while the Weibull distribution was deemed suitable for data after degradation. These results can lead to lower errors in the power system design process, enhancing reliability when analyzing the BD strength data of insulation materials.

17 October 2024 in Energies
Verified
Journal Article
Open access
PDF file
KPKeonhee Park
Keonhee Park
SLSeung Won Lee
Seung Won Lee
HKHae-Jong Kim
Hae-Jong Kim
JLJang-Seob Lim
Jang-Seob Lim
Research has been conducted on medium-voltage direct current (MVDC) to address the limited transmission capacity of existing AC power transmission lines and to achieve efficient integration of renewable energy sources. Another method to increase the transmission capacity is to raise the maximum allowable temperature of the power cable. The maximum allowable temperature for cross-linked polyethylene (XLPE) in commercial power cables is 90 °C. Polypropylene (PP) is considered as an alternative material. PP has a maximum allowable temperature of 110 °C and possesses thermoplastic properties, making it environmentally friendly. However, PP may not ensure uniformity of the insulation layer depending on the extrusion process, including cooling conditions. This study aimed to determine the applicability of MVDC cables by assessing the uniformity of the insulation layer of extruded cables, considering the cooling conditions of PP in specimens. For the cooling conditions, ambient air, cooling press, and water cooling were evaluated for DC breakdown strength. Furthermore, the uniformity of the breakdown strength of the insulation layer, which was divided into sections such as conductor and sheath, was evaluated for commercial PP, XLPE, and the developed PP cables. This study aims to provide a comprehensive analysis of the DC BD strength of PP under various cooling conditions and emphasize the importance of uniformity in extruded cable sections.

27 June 2025 in IEEE Access
Verified
Journal Article
Open access
KPKeonhee Park
Keonhee Park
SLSeung Won Lee
Seung Won Lee
HKHae-Jong Kim
Hae-Jong Kim
JLJang-Seob Lim
Jang-Seob Lim
This study investigated the thickness effect (the influence of sample thickness variation) on the assessment of the dielectric breakdown strength in XLPE and PP insulators. A Monte Carlo simulation (MCS) was conducted to quantify the impact of voltage and thickness on the dielectric strength. Aimed at improving power system reliability, the study sought to provide a quantitative basis for the thickness effect and propose a reasonable range of thickness variation, specifically between 0.2 mm and 1.1 mm. The simulation was repeated 1,000 times by modeling thickness deviations ranging from 1% to 10%. Levene’s test was used to assess the homogeneity of variance between an ideal group with a 1% thickness deviation and comparison groups with larger deviations. The proportion of cases where Levene’s test produced a p-value below the significance level reduced below 80% when the thickness variation exceeded 2.5%. This verified that the variance differences were statistically significant. This result (particularly for samples with thicknesses of at most 1 mm) provides a scientific basis for establishing tolerance standards for thickness variation. Thereby, it contributes to enhancing the reliability of dielectric strength testing methods.

29 May 2026 in IEEE Access
Verified
Journal Article
Open access
KPKeonhee Park
Keonhee Park
SPSe-Hee Park
Se-Hee Park
CHChul-Sang Hwang
Chul-Sang Hwang
YYYoung-Woo Youn
Young-Woo Youn
This study comparatively examines the electrical degradation characteristics of MIDEL 7131, a synthetic ester-based eco-friendly insulating oil, against conventional mineral oil through laboratory-scale experiments. While dissolved gas analysis (DGA) is a standard diagnostic tool, most studies focus on in-service or failed transformers, which pose significant time and economic constraints. Furthermore, experimental data on dissolved gas evolution trends specifically under electrical stress for emerging eco-friendly oils remain limited. To address these gaps, a scaled-down experimental system was applied to replicate the internal winding structure of actual transformers, enabling cost-effective and efficient simulation of electrical degradation. The research was conducted in two phases. First, AC dielectric breakdown (BD) tests were performed. Second, electrical stress was applied to MIDEL 7131 impregnated specimens based on the partial discharge inception voltage (PDIV) measured in accordance with IEC 60270. Results showed that MIDEL 7131 exhibited higher breakdown voltages and lower total dissolved combustible gas levels compared to mineral oil. Duval Triangle analysis indicated that degradation initiated in the partial discharge zone and progressed into the low-energy discharge (D1) zone. However, a key finding emerged despite differences in cumulative degradation between samples the gas composition plots remained clustered within the same D1 zone. This suggests that while the Duval triangle is effective for identifying fault types, it has limitations in quantitatively assessing the severity or cumulative intensity of electrical stress. These findings provide a critical technical basis for developing early fault-detection methods and enhancing the reliability assessment of eco-friendly insulating oils in power transformers.