Demand and need for the application of high voltage direct current (HVDC) are increasing because of high capacity and long-distance transmission. Research on polypropylene (PP) that can increase the operation temperature compared to existing insulation is constantly being considered. This study aimed to evaluate the electrical performance and estimate the life of HVDC application of PP. In this study, a DC V-t characteristic tests were conducted on three types of PP sheets at a temperature of 110 °C. In addition, a life estimation formula based on the electrical stress was derived and the electrical performances were evaluated. The experimental results show that the life exponent of material mixed with block copolymer, homo polymer and high density polyethylene (HDPE) was 23 and the electrical performance was 17% better than block copolymer, thereby demonstrating the reliability and electrical performance for application of HVDC.
31 July 2020 in Journal of Electrical Engineering & Technology
Various statistical distributions, such as Weibull, log-normal, and exponential functions, are frequently employed to interpret the dielectric breakdown (BD) strength data of insulating materials, including cross-linked polyethylene, low-density polyethylene, polypropylene (PP), and polyethylene. This study aimed to determine a suitable statistical distribution for analyzing the dielectric BD strength data of PP insulators before and after thermal degradation. Dielectric BD strength tests were conducted on thermally deteriorated PP insulators under various degradation conditions. Additionally, a coefficient of determination was employed to assess the compatibility between the dielectric BD strength data and the statistical distribution of PP insulators before and after thermal degradation. The test results indicate that the coefficient of determination for alternating current BD strength data was 0.955 in the log-normal distribution before degradation and 0.929 in the Weibull distribution after degradation. Consequently, in the analysis of the PP insulation breakdown data, the log-normal distribution was found to be suitable for data before degradation, while the Weibull distribution was deemed suitable for data after degradation. These results can lead to lower errors in the power system design process, enhancing reliability when analyzing the BD strength data of insulation materials.
For design and operation, the conduction current of insulation must be obtained in high-voltage direct current (HVDC) power cables. The measured noise from the environment and equipment can have a significant impact on the reliability of the conduction current. To obtain an accurate conduction current, software filters of the moving average filter (MAF) and moving median filter (MMF) are employed. This study aimed to develop an evaluation method that can quantify the noise reduction of the conduction current measured in HVDC power cables. In addition, we proposed a new software filter with excellent performance. The conduction current was measured at various temperatures using an applied electric field, and the noise reduction rate of the filtered conduction current was evaluated using a statistical method. The experimental results showed that the maximum noise reduction rate of the software filters is 94 %, and the newly proposed filter is up to 26 % more effective in reducing noise than MAF and MMF. This demonstrates the development of a reliable new software filter and evaluation method.
Research has been conducted on medium-voltage direct current (MVDC) to address the limited transmission capacity of existing AC power transmission lines and to achieve efficient integration of renewable energy sources. Another method to increase the transmission capacity is to raise the maximum allowable temperature of the power cable. The maximum allowable temperature for cross-linked polyethylene (XLPE) in commercial power cables is 90 °C. Polypropylene (PP) is considered as an alternative material. PP has a maximum allowable temperature of 110 °C and possesses thermoplastic properties, making it environmentally friendly. However, PP may not ensure uniformity of the insulation layer depending on the extrusion process, including cooling conditions. This study aimed to determine the applicability of MVDC cables by assessing the uniformity of the insulation layer of extruded cables, considering the cooling conditions of PP in specimens. For the cooling conditions, ambient air, cooling press, and water cooling were evaluated for DC breakdown strength. Furthermore, the uniformity of the breakdown strength of the insulation layer, which was divided into sections such as conductor and sheath, was evaluated for commercial PP, XLPE, and the developed PP cables. This study aims to provide a comprehensive analysis of the DC BD strength of PP under various cooling conditions and emphasize the importance of uniformity in extruded cable sections.