Knowledge of the spatial and temporal distribution of heat flux is of great interest for the quantification of heat sources. In this work, we describe the development of a new ultra-broadband contactless imaging power meter based on electromagnetic to infrared technology. This new sensor and the mathematical processing of images enable the reconstruction of both spatial and amplitude distributions through a wide spectral range of sources. The full modeling of the thermoconverter based on 3D formalism of thermal quadrupoles is presented first before deriving a reduced model more suitable for quick and robust inverse processing. The inverse method makes it possible to simultaneously identify the heat losses and the spatial and temporal source distribution for the first time, to the best of our knowledge. Finally, measurements of multispectral sources are presented and discussed, with an emphasis on the spatial and temporal resolution, accuracy and capabilities of the power meter.
This work reports on a terahertz tomography technique using constant velocity flying spot scanning as illumination. This technique is essentially based on the combination of a hyperspectral thermoconverter and an infrared camera used as a sensor, a source of terahertz radiation held on a translation scanner, and a vial of hydroalcoholic gel used as a sample and mounted on a rotating stage for the measurement of its absorbance at several angular positions. From the projections made in 2.5 h and expressed in terms of sinograms, the 3D volume of the absorption coefficient of the vial is reconstructed by a back-projection method based on the inverse Radon transform. This result confirms that this technique is usable on samples of complex and nonaxisymmetric shapes; moreover, it allows 3D qualitative chemical information with a possible phase separation in the terahertz spectral range to be obtained in heterogeneous and complex semitransparent media.
1 December 2025 in Journal of the Electrochemical Society
This study examines the electrical properties of ceria and gadolinium-doped ceria as potential materials for solar-to-fuel applications. The electrical properties of ceria and Gd-doped ceria were investigated across a wide range of oxygen partial pressures (from 10 −23 to 1 atm.) and temperatures (400 °C to 1500 °C) to establish the Patterson diagrams. The electronic and ionic conductivities of ceria and Gd-doped ceria were evaluated using the four-probe and semi-permeation methods. This work demonstrates that the semi-permeation method is particularly well-suited for determining the oxygen diffusion and exchange coefficients of oxide materials at high temperature (above 1000 °C).