Solid Oxide Fuel Cells (SOFCs) operate at temperatures above 1,100 K where radiation effects can be significant. Therefore, an accurate thermal model of an SOFC requires the inclusion of the contribution of thermal radiation. This implies that the thermal radiative properties of the oxide ceramics used in the design of SOFCs must be known. However, little information can be found in the literature concerning their operating temperatures. On the other hand, several types of ceramics with different chemical compositions and microstructures for designing efficient cells are now being tested. This is a situation where the use of a numerical tool making possible the prediction of the thermal radiative properties of SOFC materials, whatever their chemical composition and microstructure are, may be a decisive help. Using this method, first attempts to predict the radiative properties of a lanthanum nickelate porous layer deposited onto an yttria stabilized zirconium substrate can be reported.
11 June 2012 in Journal of Physics: Conference Series
A parallel C++ numerical code was implemented to quickly and accurately calculate the radiative properties (reflectance and transmittance) of metallic foams that had scattering domains (pores, struts) with mean sizes larger than the wavelengths associated with thermal radiation. For application, the code required experimental knowledge of the material characteristics on several length scales ranging from the microscopic (approximately one micrometer) to macroscopic (approximately one centimeter). In particular, the 3D voxelized image of the investigated material was used, which was previously acquired using x-ray μ-tomography. The radiative properties were obtained by tracking a large number of rays within the numerical medium. On the local scale, rays interacted directly with the fluid/solid interface, which was obtained prior to the calculation by the application of a robust marching cubes algorithm to the entire set of voxels. The code was applied to aluminum foam samples, for which the experimental radiative properties were previously measured at room temperature with a customized instrument based on an infrared spectrometer. The code performance is discussed and the results enabled determination of the effects caused by the fluid/solid interface on the interfacial reflection.
17 March 2011 in Journal of the American Ceramic Society
This study examines the electrical properties of ceria and gadolinium-doped ceria as potential materials for solar-to-fuel applications. The electrical properties of ceria and Gd-doped ceria were investigated across a wide range of oxygen partial pressures (from 10 −23 to 1 atm.) and temperatures (400 °C to 1500 °C) to establish the Patterson diagrams. The electronic and ionic conductivities of ceria and Gd-doped ceria were evaluated using the four-probe and semi-permeation methods. This work demonstrates that the semi-permeation method is particularly well-suited for determining the oxygen diffusion and exchange coefficients of oxide materials at high temperature (above 1000 °C).
This paper presents two very different methods of parallelization applicable to the solution of the multi-dimensional monochromatic radiative transfer equation. Algorithms concerning the two methods, namely angular decomposition methods and domain decomposition methods, are separately developed using the Message Passing Interface (MPI) and implemented in order to achieve fast and memory efficient solutions. A detailed comparison of performance and scalability on thousands of processors is established for both methods.