15 July 2021 in IEEE Transactions on Magnetics
Regularly used in power transformers, grain-oriented (GO) steels are also usually chosen for the manufacturing of the stator cores of hydro and turbo-generators. These steels are renowned for their high magnetic performances in the rolling direction (high permeability and low magnetic losses). Nevertheless, in a turbo-generator where GO steels are employed to reduce the size of the stator core, the magnetic flux flows through several successive directions within the plane of the steel. So, the anisotropic behavior of the GO steel has to be considered in the design step of the related devices in order to improve their energy efficiency as well as their diagnosis based on modeling. In this paper, an anisotropic phenomenological iron loss model, quite recently developed, has been studied and successfully implemented in a finite element method (FEM) simulation environment. The implementation has been validated against experimental data achieved on an industrial conventional GO grade typically used in turbogenerators. The results show a good agreement of the computational results with the experiments for both quasi-static and dynamic regimes.
27 May 2021 in IEEE Transactions on Magnetics
Robustness and reliability of modern synchronous motors require an accurate design of the permanent magnets (PMs) while accounting for the motor operating conditions (demagnetizing field and temperature). In this article, the important attribute of a PM non-linear demagnetization model within a finite element method (FEM) simulation environment is clearly emphasized. To do so, starting from the experimental measurement achieved on an NdFeB PM, a toolbox named “PM-Demag” has been developed. This toolbox manages the PM history and updates the PM $B(H)$ characteristics depending on the temperature and the PM working point. Finally, a relatively straightforward coupling is implemented with an FEM software and applied to a simple study case. The results show local magnetization loss in the PM due to the combination of both the temperature and the demagnetizing field.
12 November 2021 in COMPEL - The international journal for computation and mathematics in electrical and electronic engineering
LMLeysmir Adriana Millan Mirabal
Leysmir Adriana Millan Mirabal
+1
The purpose of this study is to explore the effect of the demagnetizing field in the Epstein characterization of grain-oriented electrical steels through a finite element method (FEM) simulations. A 3D finite element simulation has been realized to represent the parallel and X-stacking configurations in the Epstein frame. The numerical results have been compared with experimental measures. In a parallel configuration, the measured induction is actually the one in the material, whereas the resulting magnetic field differs from the applied one (in magnitude and angle) due to the shape anisotropy (demagnetizing field). In X-stacking configuration, the resulting magnetic field is close to the applied magnetic field (and then the supposed excitation field in the Epstein frame), whereas the magnetic induction has deviated from the axis of the strips. Both stacking configurations (parallel and cross) of the Epstein frame are analyzed by three-dimensional finite element simulation.
27 November 2023 in IEEE Transactions on Magnetics
Grain-Oriented Electrical Steels (GOES) are widely used in transformers to increase energy efficiency while reducing the volume and weight of such transformers. These GOES are characterized by their strong anisotropy, which leads to different magnetic properties (behavior law and iron losses) depending on the strength and the direction of the applied magnetic field to the rolling direction (RD). To describe the anisotropy of the GOES behavior law, the Orientation Distribution Function (ODF) based approach shows interesting features regarding ease of identification and implementation. However, a significant oscillation issue in this model at low magnetic field exits. It is recently reported that a high-order ODF based method can improve the accuracy of the original model. But the high-order ODF based model implies an important number of experimental data according to different directions of the applied field to RD (different magnetization angles) to build a model with sufficient accuracy. In addition, the accuracy also depends on how the input magnetization angles are selected between the RD and the transverse direction (TD). In this article, an optimal algorithm for input magnetization angle selection is proposed for the high-order ODF based method. To validate the proposed algorithm, 13 magnetization angles have been measured. A comparative study has been conducted based on the original and the high-order ODF based models built with the proposed selected magnetization angles. It is shown that the proposed algorithm can reduce the number of experimental data needed for the ODF based model while providing an acceptable global error.
24 June 2024 in IEEE Transactions on Magnetics
This article explores the implications of nonlinear anisotropic behavior models on the simulation of magnetic losses in a toroidal core made of a conventional grain-oriented electrical steel (GOES) within a finite element method (FEM) simulation environment. GO laminations are commonly used to improve the efficiency of electrical machines, but their complex behavior requires accurate modeling. Nonlinear resolutions for different anisotropy models were implemented and compared with a measurement-based model. Then, an anisotropic iron loss model from Appino et al. has been applied to evaluate the iron losses. This method provides a decisive way to qualitatively assess various models directly, relying on measurable quantities of interest.
4 January 2025 in Measurement
JBJean-Christophe Bastsale