Focused microwave−hyperthermia therapy has recently emerged as a key technology in the treatment of breast cancer due to non−invasive treatment. An applicator of a three−ring phased array consisting of ultra−wideband (UWB) microstrip antennas was designed for breast cancer therapy and operates at 0.915 GHz and 2.45 GHz. The proposed antenna has an ultra−wideband from 0.7 GHz to 5.5 GHz with resonant frequencies of 0.915 GHz and 2.45 GHz and dimensions of 15 × 43.5 × 1.575 mm3. The number of each ring was chosen to be 12 based on the SAR distribution and the performance indicators of tumor off−center focusing results for four different numbers of single−ring arrays. The homogeneous breast model is applied to a three−ring phased array consisting of 36 elements for focused simulation, and 1 cm3 and 2 cm3 tumors are placed in three different locations in the breast. The simulation results show that the proposed phased array has good performance and the capability to raise the temperature of different volumes of breast cancer above 42.5 °C after choosing a suitable operating frequency. The proposed applicator allows for precise treatment of tumors by selecting the appropriate operating frequency based on the size of the malignant tumor.
A metamaterial-inspired miniaturized quadband antenna is designed and discussed with a transmission line model to study the theory of miniaturization and multiband in this paper. A conventional printed monopole antenna is assumed as a primary antenna and then surrounded by an array of 4 × 2 interdigital LHMs. The proposed antenna has a compact size of , and operates at 2.40–2.55 GHz, 3.02–3.38 GHz, 5.04–5.52 GHz, and 7.08–7.38 GHz. Good gain and omnidirectional radiation patterns are observed in simulations and measurements. A simplified transmission line modal was established to study the reasons for miniaturization and multiband that were brought about by the LHM array. Related results verified the theoretical analysis and indicated that the proposed antenna is a good candidate for wireless communication applications.
8 December 2024 in Microwave and Optical Technology Letters
In this letter, based on the theory of electromagnetic (EM) wave, an intelligent reflecting surface (IRS) assisted channel model for unmanned aerial vehicle (UAV) communications is proposed. The proposed model reveals the relationship between the received signal power of the IRS and the horizontal rotation angle, the size, and the reflection phases of IRS reflection units. The reflection phases are designed to ensure all signals reflected by IRS are phase aligned, and the theoretical result of the received signal power of IRS assisted link is in direct proportion to the square of the total geometric area of the IRS, which accords with the measurement results obtained in the real outdoor scene. In this letter, the smallest geometric area of the IRS, for which the path loss of the IRS-assisted link is equal to that of the direct link, is investigated. With the increase of the carrier frequency, the smallest geometric area gradually decreases. Finally, we investigate the ergodic sum capacity and obtain the closed-form tight upper bound, which is validated through Monte-Carlo simulation results.