Focused microwave−hyperthermia therapy has recently emerged as a key technology in the treatment of breast cancer due to non−invasive treatment. An applicator of a three−ring phased array consisting of ultra−wideband (UWB) microstrip antennas was designed for breast cancer therapy and operates at 0.915 GHz and 2.45 GHz. The proposed antenna has an ultra−wideband from 0.7 GHz to 5.5 GHz with resonant frequencies of 0.915 GHz and 2.45 GHz and dimensions of 15 × 43.5 × 1.575 mm3. The number of each ring was chosen to be 12 based on the SAR distribution and the performance indicators of tumor off−center focusing results for four different numbers of single−ring arrays. The homogeneous breast model is applied to a three−ring phased array consisting of 36 elements for focused simulation, and 1 cm3 and 2 cm3 tumors are placed in three different locations in the breast. The simulation results show that the proposed phased array has good performance and the capability to raise the temperature of different volumes of breast cancer above 42.5 °C after choosing a suitable operating frequency. The proposed applicator allows for precise treatment of tumors by selecting the appropriate operating frequency based on the size of the malignant tumor.
With the continuous development and progress of science and technology, the increasingly complex electromagnetic environment and the research and development of new radar systems have led to the emergence of various radar signals. Traditional methods of radar emitter identification cannot meet the needs of current practical applications. For the purpose of classification and recognition of radar emitter signals, this paper proposes an improved EfficientNetv2-s classification method based on deep learning for more precise classification and recognition of radar radiation source signals. Using 16 different types of radar signal parameters from the signal parameter setting table, the proposed method generates random data sets consisting of spectrum images with varying amplitude. The proposed method replaces two-dimensional convolution in EfficientNetV2 with one-dimensional convolution. Additionally, the channel attention mechanism of the EfficientNetv2-s is optimized and modified to obtain attention weights without dimensional reduction, resulting in superior accuracy. Compared with other deep-learning image-classification methods, the test results of this method have better classification accuracy on the test set: the top1 accuracy reaches 98.12%, which is 0.17~3.12% higher than other methods. Furthermore, the proposed method has lower complexity compared to most methods.
19 August 2021 in Applied Computational Electromagnetics Society Journal (ACES)
Diagonal loading technology is widely used in array antenna beamforming because of its simple method, low computational complexity and the ability to improve the robustness of beamformer. On this basis, this paper proposes a robust adaptive beamforming method based on automatic variable loading technology. The automatic variable loading matrix (AVLM) of the method is composed of two parts. The non-uniform loading matrix dominants when the input signal-to-noise ratio (SNR) is small, effectively control the influence of noise disturbance without affecting the ability of array antenna to suppress interference. The variable diagonal loading matrix dominants when the input SNR is high to improve the output performance of array antenna. Simulated results show that compared to other methods, the proposed method has better output performance for both low and high input SNR cases.
18 April 2024 in Microwave and Optical Technology Letters
A metamaterial-inspired miniaturized quadband antenna is designed and discussed with a transmission line model to study the theory of miniaturization and multiband in this paper. A conventional printed monopole antenna is assumed as a primary antenna and then surrounded by an array of 4 × 2 interdigital LHMs. The proposed antenna has a compact size of , and operates at 2.40–2.55 GHz, 3.02–3.38 GHz, 5.04–5.52 GHz, and 7.08–7.38 GHz. Good gain and omnidirectional radiation patterns are observed in simulations and measurements. A simplified transmission line modal was established to study the reasons for miniaturization and multiband that were brought about by the LHM array. Related results verified the theoretical analysis and indicated that the proposed antenna is a good candidate for wireless communication applications.
Target detection in synthetic aperture radar (SAR) imagery remains a significant technical challenge, particularly in scenarios involving multi-target interference and clutter edge effects that cannot be disregarded, notably in high-resolution imaging applications. To tackle this issue, a novel two-stage superpixel-level constant false-alarm rate (CFAR) detection method based on a truncated kernel density estimation (KDE) model is proposed in this article. The contribution mainly lies in three aspects. First, a truncated KDE model is used to fit the statistical distribution of clutter in the detection window, and adaptive thresholding is used for clutter truncation to remove outliers from the clutter samples while preserving the real clutter. Second, based on the clutter statistics, the KDE model is accurately constructed using the quartile based on the truncated clutter statistics. Third, target superpixel detection is performed using a two-stage CFAR detection scheme enhanced with local contrast measure (LCM), consisting of a global stage followed by a local stage. In the global detection phase, we identify candidate target superpixels (CTSs) based on the superpixel segmentation results. In the local detection phase, a local CFAR detector using a truncated KDE model is employed to improve the detection process, and further screening is performed on the global detection results combined with local contrast. Experimental results show that the proposed method achieves excellent detection performance, while significantly reducing detection time compared to current popular methods.