Hanaa Selim

Dr. Hanaa Selim


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 December 2023 in Environmental Science and Pollution Research
Verified
Journal Article
Open access
PDF file
MMMahmoud F. Mubarak
Mahmoud F. Mubarak
HSHanaa Selim
Hanaa Selim
HHHamada B. Hawash
Hamada B. Hawash
MHMohamed Hemdan
Mohamed Hemdan
In this study, we developed a novel nanocomposite-based membrane using maghemite copper oxide (MC) to enhance the separation efficiency of poly(vinyl chloride) (PVC) membranes for oil-in-water emulsions. The MC nanocomposite was synthesized using a co-precipitation method and incorporated into a PVC matrix by casting. The resulting nanocomposite-based membrane demonstrated a high degree of crystallinity and well-dispersed nanostructure, as confirmed by TEM, SEM, XRD, and FT-IR analyses. The performance of the membrane was evaluated in terms of water flux, solute rejection, and anti-fouling properties. The pinnacle of performance was unequivocally reached with a solution dosage of 50 mL, a solution concentration of 100 mg L−1, and a pump pressure of 2 bar, ensuring that every facet of the membrane’s potential was fully harnessed. The new fabricated membrane exhibited superior efficiency for oil–water separation, with a rejection rate of 98% and an ultra-high flux of 0.102 L/m2 h compared to pure PVC membranes with about 90% rejection rate and an ultra-high flux of 0.085 L/m2 h. Furthermore, meticulous contact angle measurements revealed that the PMC nanocomposite membrane exhibited markedly lower contact angles (65° with water, 50° with ethanol, and 25° with hexane) compared to PVC membranes. This substantial reduction, transitioning from 85 to 65° with water, 65 to 50° with ethanol, and 45 to 25° with hexane for pure PVC membranes, underscores the profound enhancement in hydrophilicity attributed to the heightened nanoparticle content. Importantly, the rejection efficiency remained stable over five cycles, indicating excellent anti-fouling and cycling stability. The results highlight the potential of the maghemite copper oxide nanocomposite-based PVC membrane as a promising material for effective oil-in-water emulsion separation. This development opens up new possibilities for more flexible, durable, and anti-fouling membranes, making them ideal candidates for potential applications in separation technology. The presented findings provide valuable information for the advancement of membrane technology and its utilization in various industries, addressing the pressing challenge of oil-induced water pollution and promoting environmental sustainability. Graphical Abstract

31 May 2023 in Scientific Reports
Verified
Journal Article
Open access
PDF file
HSHeba M. El Sharkawy
Heba M. El Sharkawy
ASAmira M. Shawky
Amira M. Shawky
RERania Elshypany
Rania Elshypany
HSHanaa Selim
Hanaa Selim
Investigate the use of visible light to improve photocatalytic degradation of organic pollutants in wastewater. Nitrogen-doped titania and molybdenum sulfide nanocomposites (NTM NCs) with different weight ratios of MoS2 (1, 2, and 3 wt.%) synthesized by a solid state method applied to the photodegradation of methylene blue(MB) under visible light irradiation. The synthesized NTM composites were characterized by SEM, TEM, XRD, FT-IR, UV–Vis, DRS and PL spectroscopy. The results showed enhanced activity of NTM hybrid nanocrystals in oxidizing MB in water under visible light irradiation compared to pure TiO2. The photocatalytic performance of NTM samples increased with MoS2 content. The results show that the photodegradation efficiency of the TiO2 compound improved from 13 to 82% in the presence of N-TiO2 and to 99% in the presence of MoS2 containing N-TiO2, which is 7.61 times higher than that of TiO2. Optical characterization results show enhanced nanocomposite absorption in the visible region with long lifetimes between e/h+ at optimal N-TiO2/MoS2 (NTM2) ratio. Reusable experiments indicated that the prepared NTM NCs photocatalysts were stable during MB photodegradation and had practical applications for environmental remediation.

30 January 2024 in Scientific Reports
Verified
Journal Article
Open access
PDF file
ASAmira M. Shawky
Amira M. Shawky
RERania Elshypany
Rania Elshypany
HSHeba M El Sharkawy
Heba M El Sharkawy
MMMahmoud F. Mubarak
Mahmoud F. Mubarak
HSHanaa Selim
Hanaa Selim
The tertiary composite of TiO2/CuO @ Ag (TCA) were synthesized by the solid state method using different ratios of TiO2/CuO NCs and Ag NPs. The structural, morphological, and optical properties of nanocomposites were analyzed by scanning electron microscope, Transmission electron microscope, X-ray diffraction, Fourier transform infrared spectra, UV–Vis diffuse reflectance spectra (UV–Vis/DRS) and photoluminescence spectrophotometry. The results showed enhanced activity of TCA hybrid nano crystals in oxidizing MB in water under visible light irradiation compared to pure TiO2. The photocatalytic performance TCA samples increased with suitable Ag content. The results show that the photo degradation efficiency of the TiO2 compound improved from 13 to 85% in the presence of TiO2–CuO and to 98.87% in the presence of Ag containing TiO2–CuO, which is 7.6 times higher than that of TiO2. Optical characterization results show enhanced nanocomposite absorption in the visible region with long lifetimes between e/h+ at optimal TiO2–CuO/Ag (TCA2) ratio. Reusable experiments indicated that the prepared TCA NC photo catalysts were stable during MB photo degradation and had practical applications for environmental remediation.

8 March 2024 in Surfaces and Interfaces
Verified
Journal Article
Closed access
AEAyman K. El-Sawaf
Ayman K. El-Sawaf
MHMohamed Hemdan
Mohamed Hemdan
HSHanaa Selim
Hanaa Selim
ANAmal A. Nassar
Amal A. Nassar
Mahmoud F. MubarakMahmoud F. Mubarak
Mahmoud F. Mubarak

7 February 2023 in Catalysts
Verified
Journal Article
Open access
PDF file
HSHanaa Selim
Hanaa Selim
ESE. R. Sheha
E. R. Sheha
RERania Elshypany
Rania Elshypany
PRPatrice Raynaud
Patrice Raynaud
HEHeba El-Maghrabi
Heba El-Maghrabi
ANAmr NADA
Amr NADA
The current work focuses on the photo degradation of organic pollutants, particularly methylene blue (MB) dye, and the production of hydrogen as green energy using a composite of silver phosphate Ag3PO4 (AP) and barium oxide/silver phosphate BaO@Ag3PO4 (APB) as a photocatalyst. This composite was successfully synthesized using a chemical co-precipitation approach. The physicochemical properties of the obtained samples were investigated using scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), ultraviolet–visible diffuse reflectance spectroscopy (UV–Vis/DRS), and photoluminescence (PL) spectrophotometry. From XRD, the average crystallite sizes of AP and APB are 39.1 and 46 nm, respectively, with a homogeneous morphology detected by SEM. UV and PL experiments showed that the compound is active under visible light, with an improvement in the lifetimes of the electrons and the holes in the presence of BaO with Ag3PO4. The as-synthesized APB photocatalyst sample showed a remarkably high degradation efficiency of MB (20 ppm, 50 mL) of around 94%, with a hydrogen production yield of around 7538 μmol/(h·g), after 120 min of illumination, which is greater than the degradation efficiency of the AP photocatalyst sample, which was about 88%. The high photodegradation efficiency was attributed to the electronic promotion effect of the BaO particles. The APB composite demonstrated an increased photocatalytic performance in effectively degrading an organic dye (MB) with no secondary pollutants when exposed to visible light irradiation.

19 July 2023 in Research Square
Verified
Preprint
Open access
PDF file
HSHanaa Selim
Hanaa Selim
MMMahmoud F. Mubarak
Mahmoud F. Mubarak
HHHamada B. Hawash
Hamada B. Hawash
In this study, poly(vinyl chloride) (PVC) nanocomposite membranes with maghemite copper oxide nanocomposite (PMC) were developed in order to enhancethe PVC membrane performance and its physicochemical properties for the separation of oil-in-water emulsions. The maghemite copper oxide nanocomposite was synthesized by co-precipitation method. The nanocomposite-based membrane was fabricated by casting the nanocomposite onto a PVC support. By using the co-precipitation process, maghemite copper oxide nanocomposite was created. Various techniques such as Transmission electron microscope (TEM), Scanning electron microscope (SEM), X-ray diffraction (XRD), and Fourier transform infrared (FT-IR), have been used to characterize membranes. Water flux, solute rejection, and anti-fouling properties of the membrane were also evaluated. The results demonstrated the nanocomposite's high degree of crystallinity and well-dispersed nanostructure. The resulting membrane was found to have a high oil-water separation efficiency of 98% and an ultra-flux of 0.102L/m2.h compared pure PVC membrane. It was found that the rejection efficiency remained stable over5 cycle times with excellent anti-fouling and cycling stability. The results showed that the maghemite copper oxide nanocomposite-based PVC membrane is a promising material for use in the separation of oil-in-water emulsions, which provide valuable information for the development of new membrane and more flexible, durable, and anti-fouling, making it ideal for use in the separation of oil-in-water emulsions.