This study focuses on the development of a nanocomposite membrane using polyvinyl chloride and nanocellulose@titanium aluminate to effectively filter and adsorb dye from wastewater. Various analytical techniques were used such as FTIR, XRD, SEM, and TGA to characterize the synthesized adsorptive nanocomposite membrane. The thermal and electrical properties of the membrane were measured using a static system. The study investigated the effect of different adsorbent dosages, pH levels, and dye concentrations on the membrane’s adsorption ability. The PVC-NC@TALCM nanocomposite membrane was found to remove 98.6% of MB dye when loaded with 5% titanium aluminate at pH 10. Kinetic and isotherm studies revealed that the adsorption of MB onto the membrane followed pseudo-second-order kinetics and Freundlich isotherms, respectively. The researchers also highlighted the economic and eco-friendly nature of the PVC-NC@TALCM nanocomposite membrane as a viable option for the removal of MB from industrial wastewater.

This study aimed to create activated carbon thin film (ACTF) as a hybrid nanocarbon via a simple and efficient method through a single-step mixing process using thermal functionalization techniques. TEM, BET, BJH, FTIR, XRD, and TGA analyses were used to investigate the prepared ACTF. The results exhibited that ACTF has a porous structure with a high surface area of 318 m²/g and important functional groups, which are considered significant adsorption sites. The adsorption performance of ACTF for phenol and p-nitrophenol (PNP) removal from aqueous solutions using batch adsorption mode was studied. Evaluations were conducted on experimental factors influencing the adsorption process, such as pH, initial phenol and PNP concentrations, adsorbent dose, contact time, and temperature. Under the optimized conditions, the phenol and PNP were removed with a maximum efficiency of 89.98% and 92.5%, respectively. The results of linear and nonlinear isotherms and kinetic models of phenol and PNP showed that both pollutants were well fitted with the Freundlich model (R² = 0.99, χ² = 0.13, RMSE = 1.6), (R² = 0.99, χ² = 0.42, RMSE = 2.8), and the pseudo-second-order model (R² = 0.999, χ² = 0.03, RMSE = 0.31), (R² = 0.99, χ² = 0.01, RMSE = 0.24), for phenol and PNP, respectively. According to the calculated thermodynamic results, the adsorption of phenol and p-nitrophenol onto the ACTF surface was a spontaneous and exothermic reaction. The regeneration experiments showed that the spent ACTF could be reused up to the fifth cycle while maintaining noteworthy removal efficiency.

Lead is one of the fundamentally risky metal ions existing in wastewater. A laboratory batch technique carried out to study the impact of initial concentration, pH, temperature, a dose of adsorbent and contact time on the elimination of lead ions onto oil shell sedimentary rock as natural clay. Two natural inorganic composites Kaolinite/Smectite-A and Kaolinite/Smectite-B have been used. The lead removal enlarged with rising initial metal solution concentration, contact time and pH. The elimination reaction speed was high at the initial period of contact time and then decreased to attain equilibrium at 45, 30 min for Kaolinite/Smectite-A and Kaolinite/Smectite-B adsorbents, respectively. Mutually, Langmuir and Freundlich’s isotherms are applicable to describe the metals adsorption and thermodynamic parameters ΔG; ΔS and ΔH were calculated indicating that the adsorption process is physisorption, spur-of-the-moment and endothermic.